Can the ACS 1121 5.2 act as a syslog server?

Hello all,
 Can the ACS 5.2 act as syslog server to Cisco catalyst switches and nexus switches??
Thanks in advance for any help with this!

Hi ,
So far PI can only show Severity 0 ,1 and 2 syslogs under Operate > Alarms & Events >syslogs
If you are not able to see them also then try to restrat the PI services (ncs stop and ncs start ) and check the issue again
Thanks-
Afroz
****Ratings Encourages Contributors ****

Similar Messages

  • Red Hat OS version in the ACS 1121

                    Does anyone happen to know the Red Hat OS version in the ACS 1121 appliance?

    I don't have an ACS1121 handy but I believe the ADE-OS appliances have a common base.
    Here the output from one running Cisco Prime LMS 4.2.1 (the latest version of that product):
    [*****/root-ade ~]# cat /proc/version
    Linux version 2.6.18-238.1.1.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Tue Jan 4 13:32:19 EST 2011

  • Important! Can IDS 4.1x Send event messages to a syslog server??

    I know IDS event view and MC can pull the IDS event from IDS sensors and IDSM. But our company is think to collect all the security message in a syslog server. firewall can send syslog to this server. But for IDS and IDSM 4.1, I can't find a way to send the IDS event to syslog server. Is there any way to do that????
    I am really appreciate if you can help me,thanks.

    You comment is an easy statement to make, but IMHO unfair.
    If you look at the Cisco IDS/IPS product line's history, you'll realize that the current RDEP/SDEE communications model is infinitely more secure, while remaining easy to use, than any other method one could propose.
    Initially, the sensors pushed events to the centrally monitoring console via UDP (port 45000), with most of the data in the clear (the source and destination IP address were obfuscated). This is obviously not very safe because, even though the communications were pseudo connection-oriented due to checking by the application daemons at each end, it is possible to intercept and modify the IDS alert to inject false data.
    This same problem exists with stock syslog, since everything goes on the wire as a UDP packet and there is no data obfuscation or encryption what so ever.
    The distinct advantage to the current communications model is the fact that RDEP/SDEE use cryptography to protect your IDS/IPS alerts, and that is also uses a standards-based structure in XML-based forms to pass the data.
    Finally, since Cisco has released an SDK for RDEP/SDEE, and many 3rd party vendors have software that can act as RDEP/SDEE clients, I disagree that you’re stuck with the CiscoWorks-based VMS suite. Besides, you only have to buy the suite if you need to manage more than 5 sensors, but I digress...
    Alex Arndt

  • Can a Linksys E900 N300 router act as a print server

    Hi everybody. Few months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer.  Is it possible to do like this? If so please help me. Thank you.
    lsrinivas

    No. You cannot connect a USB printer to this router since it does not this feature. You can either use a print server or consider sharing the printer to the network from one computer. Better check with microsoft how to share a usb printer to the network. Or you may also check this site for some information: http://windows.microsoft.com/en-ph/windows7/share-a-printer

  • Can dot1x authetication relayed by ACSv4.2 to another RADIUS Server ?

    Dear all,
    I'm doing dot1x authentication with ACSv4.2 , my goal is the dot1x authentication request (EAP-MD5) is relayed to another RADIUS Server by ACSv4.2.
    I'd configured the ACS to use External Database with Radius Token Server, but it did not work. With the same configuration , the login authentication is relayed correctly.
    Can dot1x authetication relayed by ACSv4.2 to another RADIUS Server ?
    Jerry

    I think it is possible because Extensible Authentication Protocol (EAP), provides the ability to deploy RADIUS into Ethernet network environments. The 802.1x standard, also known as EAP over LAN (EAPoL), concerns the part of the wider EAP standard that relates to broadcast media networks. Upon connection, EAPoL provides a communications channel between an end user on a client LAN device to the AAA server through the LAN switch. The functionality is similar to what Point-to-Point Protocol (PPP) servers on point-to-point links provide.
    Hope the following URL helps you:
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/deploy.html
    Following URL explains about enhanced login features in ACS 4.2
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/new_feats.html#wp1011240

  • I am having a problem. When I click on the Mobile Facebook icon it acts like it is going to start opening then it quits and goes back to the icon. So I can't use Facebook on my iPhone 4

    I am having a problem. When I click on the Mobile Facebook icon it acts like it is going to start opening then it quits and goes back to the icon. So I can't use Facebook on my iPhone 4

    Force quit the application and try again.
    Try a reset or restart of the device, trying the app after each step.

  • Does NI offer anything that can handle an AC Excitation similar to the SCXI 1121 which has DC Excitation?

    I have a LeBow strain gauge Torque Sensor that requires 10 VAC Excitation does NI have anything to accomodate this? I know the SCXI 1121 handles 10 VDC Excitation.

    Joey,
    We only offer one SCXI module with VAC excitation, but the highest voltage it can give is 3 Vrms (1-3 Vrms) and in frequency from 2.5 to 10 kHz. You can take a look to it by going to the main page at www.ni.com, and then click on the link for "Product Catalog", then select "Products and Services" and select "Signal Conditioning"... then select "SCXI", then "SCXI Analog Input", and then on the select box that says "Signal Conditioning Feature" select "Excitation"...and then click on the "SCXI 1540" link... or follow this link as well...
    SCXI 1540 Catalog Page
    In your case if you really need the 10VAC excitation, you most probably are going to need an external excitation source.
    Good luck!...
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments

  • ACS 1121 to ISE migration

    Hello ALL,
    we have ACS 1121 and are planning to migrate to ISE let me know if its possible if yes what are the license  i need to buy

    Existing NAC and ACS customers with active support contracts on older appliances are entitled to all of the ISE appliance migration SKUs. Given all the potential appliances migration options (NAC 3140 to ISE 3395, ACS 1120 to ISE 3315, NAC 3310 to ISE VM, etc) PMBU decided to not put any restriction on which migration appliances SKUs customers can use. PMBU is not offering credit for older hardware because the focus is on reduced Base or free Advanced migration licenses.

  • ACS 1121 with v5.0 PAK lost

    It has been more than a year since a customer bought a Cisco ACS 1121. It was unpacked then and the PAK is lost, no where to be found.
    Is there any way to retrive the lost PAK ??? Help needed much.

    You need to send an email to [email protected] with the following information:
    Cisco Sales Order Number
    SAS contract
    You can obtain your software license at this site: http://www.cisco.com/go/license. Once you arrive at this site, you will need to enter in your Cisco.com user ID and your password to access this site. You will also need to enter in your Product Authorization Key (PAK).
    Regards,
    Jatin
    Do rate helpful posts-

  • ACS 1121 Patch10

    I have an issue with applying a patch to an ACS 1121 appliance running version 5.2.0.26. I have 5 units that needed updating and the first one is the unit with the problem. The subsequent ones updated with no issues.
    When I do a show version the 5.2.0.26.10 does not show. When I try to do a reinstall I get back patch all ready exists. When I try to do an uninstall I get back patch does not exist.
    Is there a command can wipe out patch 10, so I can start over? The CLI factory-reset only wipes the web configuration not the running-config or IOS.
    Thank you,
    John

    I have seen the issue come over the aliase before and so am sharing that previous answer:
    We can easily rename the Patch file name and wait the for the process to complete using the new filename. For example:
    - If trying the following drops the error:
    ACS01/admin# acs patch install 5-2-0-26-10.tar.gpg repository Test
    Patch '5-2-0-26-10' is already installed.
    % Error: Failure to open / validate the patch
    - Rename the patch filename and try again. you can rename it to something like: patch_5-2-0-26-10.tar.gpg
    ACS01/admin# acs patch install patch_5-2-0-26-10.tar.gpg repository Test

  • Cisco ACS 1121 server configuration

    Hi,
    Anyone can tell me how to configure LAN teaming in Cisco ACS 1121. My requirement is to have virtual IP in the server with two physical IPs in the available 2 interface in the server.
    Regards,
    Haja Shajahan.M

    Currently Gig 0 is supported. Gig 1 is blocked. Check this link ((Blocked) Gigabit Ethernet 1).
    http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.2/installation/guide/csacs_hw_ins.html#wp1119105
    Paps

  • Cisco ACS 1121 version 5.3 - Logging

    Hi There
    I'm new to Cisco ACS 5.X. From what I have read, the Cisco ACS can act as a Logging Server. Does this mean, all the syslog messages from all the other ACS and network devices can be stored by ACS? I'm a bit confused on this part.
    Lastly, I understand that Cisco ACS has many or maybe 2 instances? When do we use these instance? What is this instance?
    Regards,
    Ram

    In the distributed deployment, you should specify one acs server as the Logcollector. All other servers send logs to the Logcollecter.
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html
    In distributed deployment, each acs server is one instance. So you have one primary instance and multiple secondary instances.
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/introd.html#wp1058054
    Sent from Cisco Technical Support iPad App

  • Can the AirPort Extreme work as an extender?

    Simple question: Can the AirPort Extreme work as a wireless network extender? (I have tried to research this online, of course, but I haven't had much luck.)
    Background: The only option from our ISP is a router/modem combination. It used to be plugged directly into my dad's (Dell and Windows) desktop computer, but I was having trouble connecting all my devices wirelessly. So, I moved it into the kitchen and plugged it into the phone line (we have AT&T DSL) and got a USB wireless adapter for my dad's computer (because he didn't think he needed the wireless option on his "fancy" new Dell). I also have a different brand of adapter plugged into my old iMac G3, which I LOVE using.
    Since doing this, my dad has constantly complained of his Internet not working correctly, things loading slowly, and having trouble connecting at all. (Full disclosure: he STILL uses the complete desktop version of AOL and refuses to give it up.) However, I've had no trouble on ANY of my devices--the G3, my white MacBook, my iPad, my iPod, or my mom's Kindle Fire. This leads me to believe the problem lies in the fact that he's using AOL because I usually don't have trouble when I briefly use Chrome on his desktop.
    I've tried finding different solutions, including flashing an old router to use an extender and researching different extenders and bridges and such, but nothing looks like a viable solution because of all our components.
    I'm wondering if the AirPort Extreme (probably the A1143;or any of the other AirPort devices) can work as an extender. To appease my dad, it'd be best to take the modem/router back to his man cave so he can hook it back up to his computer, but I'm not sure if the AirPort can pick up the wireless signal and perhaps be plugged directly into my G3 and otherwise act as an extender for my other devices (while searching for an Internet solution for my G3, I read on here that someone did this, but there was no further information on how it worked) or if I can plug it into the kitchen phone line and keep the USB adapter for the G3 and have wireless access to all my other things.
    Help?
    (I can't find the original support article where a responder mentioned using the AirPort station with an iMac G3, but i did locate this one: https://discussions.apple.com/message/13080786#13080786)
    (My iMac is one of the later ones. It's running 10.4.1 and is a 600MHz model.)

    Simple question: Can the AirPort Extreme work as a wireless network extender?
    Simple answer: Yes....IF....the AirPort Extreme is extending a wireless network that is being provided by another Apple 802.11n wireless router.
    Another way of saying the same thing is that it will take a minimum of two Apple 802.11n wireless routers to extend a signal wirelessly.
    The more complex answer involves distances and obstructions involved in the setup, or alternate solutions such as running Ethernet cabling or using Ethernet powerline adapters.

  • Can OSB proxy and business service act as a stub ?

    Hi all,
    would like to enquire whether I can achieve the following. I have a web service consumer. Can the consumer call a OSB proxy service and within the proxy service, I use XQuery and extract the body and perform some transformation. And the proxy service return variables to the consumer? Without calling any business proxy in the process
    Can the proxy service act as a stub? Would I need a dummy business service for it?
    Or my objective cannot be achieved in OSB?
    Appreciate any thoughts.

    Hi,
    Assuming the incoming body contains "name: Peter, age: 13". Can the return information contain "name:Peter, age:13, Status: N"Yes, it's possible too, in your Response XQuery Transformation u can add n number of additional fields, and send back to requester.
    You can do both Translations and Transformations.
    Can I also configure the proxy service not to call any business service?Have you made/generated your proxy service from existing Business Service?
    If yes,: then your message flow would have only Route Node ( routing to Business Service).
    1. To do transformations on request add a Pipeline Pair in message flow and inside it add stage for doing XQuery transformations.
    2. Use Reply Action in stage as last Actions and do reply with Success.( The message flow won't go to Route actions after this ).
    IF No : Then either remove the OSB Action which is being used to call Business Service.
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    Regards,
    Abhinav Gupta
    Edited by: Abhinav on Mar 8, 2013 3:27 PM

  • How can I get my iphone to act as a drive not in iTunes?

    How can I get my iphone to act as a drive not in iTunes?

    TisiPhotography wrote:
    I have at some point been able to take my photos and copy them and paste them into a folder on my hard drive. Now I cant do that because I'm forced into Itunes. I suppose I was asking the wrong question. How do I take my pics off the camera without usint Itunes or Iphoto?
    You could use image capture, aperture or any other number of programs.
    http://support.apple.com/kb/HT4083

Maybe you are looking for