Can the appearance of the Calendar in Maverick be improved?

Successfully downloaded and installed Maverick yesterday. When I checked the Calendar, found the view and appearance different than my usual view. I went to the Calendar Preferences and found the Day Start set to 6 AM. This was correct. Also the Show was set to 12 hours. I've now set the scroll bar so the day starts showing at 6am.
However, I'm finding it hard to read the calendar. I normally leave it in the Weekly view. The hours on the left are very light. Basically the calendar appears to be washed out. The old calendar had crisp lines and hours. I did increase the size of the font but that only applies to the events, not to the basic calendar appearence. Visually this new calendar is less than satisfactory and making my life a little bit harder. Any suggestions as to how to increase the darkness of the hours and lines in this application?

If you have a problem then it's probably because you are running an old version of FF. I recommend installing the current version [http://www.mozilla.com/en-US/firefox/firefox.html Here]

Similar Messages

The appearance of the company code segment of G/L account is based

Hi,
The appearance of the company code segment of G/L account is based on which factors influenced
which one account group or fieldstatuts group/posting key which one is influenced
Mnay thanks
MvNr

Hi
Gl account influenced by Account group
posting key/filed status variant can be influence at the time of document posting
Thanks & Regards
Phaneendra

Modifying the appearance of the search box, the search button, and the submit button for web forms

I'm trying to modify the appearance of the search box, the search button, and the submit button for web forms by modifying the CSS on Stylesheets. None of the tags I'm using (e.g. .webform .cat_button) seem to be working. What are the correct tags for those three elements?

When you generate the help you can select / deselect the buttons that are displayed.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

The "+" appears on the left side of the open tabs, when I re-open a closed window. The tab that should be first on the left doesn't have a tab!

The "+" appears on the left side of the open tabs, when I re-open a closed window. The tab that should be first on the left when the window is re-opened doesn't have a tab! If all the other tabs are closed, the webpage appears, but still has no tab! If more tabs are then opened, it is again inaccessible without closing all tabs!

In Finder, go command - F. On the top left set "Kind" to Date Created, finish selecting the criteria and hot "Save" on the top right. You'll get a new smart folder with an option to add it to the sidebar.

Change the appearance of the default icons and bar in iStore

We have a requirement to change the default icons and the bar of iStore. Is this possible? I have attached the screenshots here - http://www.overpic.net/viewer.php?file=xwho42d6dwuz4pkq96fo.jpg
Thanks in advance.

Pl do not post duplicates - Change the appearance of the default icons and bar in iStore

HT1338 when i would to update mac os10.7 to mac os combined10.7.4 the appear error the update couldn't be verified.it may have been corrupted during downloading....please guide me.tnx

when i would to update mac os10.7 to mac os combined10.7.4 the appear error the update couldn't be verified.it may have been corrupted during downloading....please guide me.
my type of laptop is MAC724
tnx

The first thing to attempt is restarting in Safe Mode, this will clear some caches. It's possible one or more has become corrupt. Once it has started navigate to 10.6.8 Update Combo and download and install per the directions. After it has installed if you still have difficulty re-starting, go to System Preferences - Startup Disk and make sure the internal HD is highlighted and click restart again and restart again in Safe Mode. Finally restart normally.
BTW I have asked the moderator to remove the serial number of your machine for your own security. Please DO NOT post private information such as email addresses, serial numbers etc.. to a public forum.

I was changing the appearance of the icons in the dock....

I was changing the appearance of the icons in the dock. And I decided to try doing the same thing to the icon in the sidebar in Finder. I ended up making one icon into a grey square. How do I restore the original sidebar icon?

I found an easy solution (it doesn't require the operating system to be reinstalled). And here's what my finder sidebar looks like now:
Just follow the simple instructions here: http://www.youtube.com/watch?v=bjiVTcCvMTI&feature=youtu.be

How do I enlarge the font in messages received and sent? I have it set at "13", but it is very, very small on my screen. I can't seem to change the appearance of the tool bar even when I try to "customize".

How do I enlarge the font in messages received and sent? I have the font set at "13", but the appearance on my screen is very, very small. When I try to "customize the toolbar" to look like the tool bar above this message, I am unable to do so. Please advise. Thank you.

Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
Thanks for your help!

Should a Persona graphic appear across BOTH the top of the screen and the bottom? Mine only appears across the top, but I think the Persona can also appear (half the width) on the bottom of the screen. If so, how do I make this happen? Thank you.

Running Windows Vista (64-Bit) with widescreen monitor.

A Persona consists of two images. One large image (3000x200) for the toolbars at the top and a smaller (300x100) for the footer.
There are some prefs that determine of both are visible.
lightweightThemes.isThemeSelected (true)
lightweightThemes.persisted.footerURL (true)
lightweightThemes.persisted.headerURL (true)
See also http://kb.mozillazine.org/Themes (Lightweight theme)

How do I deal with a spinning rainbow that precedes and delays the appearance of the arrow

For the past sevral weeks, my navigating in the Internet has been slowed down by the appearance of a spinning rainbow. I eventually disappears and the arrow returns permitting me to proceed in my search.
Can this rainbow be eliinated? Or can the process at least be speeded up?

To get an accurate reading with Activity Monitor you need to use your computer for at least a few hours doing the things you normally do, is that what you did when you saw 369mb of pageouts?
If all of your problems are when you're browsing you should try clearing all of your history, cookies and cache. You might also try another Browser, Firefix is good. http://appletoolbox.com/2011/10/make-safari-faster-clear-safari’s-cache-cookies- and-history/
I did a search and pretty much everyone thinks that 2gb of ram isn't enough for Lion. Take a look T the first post in this thread, it has several good tips on speeding up your Mac https://discussions.apple.com/thread/3238726?start=0&tstart=0

Issue with the appearance of the Components in jspx page in Jdev 11.1.2.1

Hi all
I am facing a very strange issue in Jdev 11.1.2.1
I am developing a adf application where in my jsx page in design mode the page's component are showing as boxes type.Starting with the template tag.
I didnot get this issue anytime.Ewerything was working fine suddenly in the middle of the development this happend.And teh pages when run show up nicely in the browser.I am getting this in all the pages in the project.
I am including one of the pages source please help me out.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
>
<jsp:directive.page contentType="text/html;charset=UTF-8"/>

Thanks for the reply ,im checking with it .i would also like to mention that in addition to the above said behaviour i am seeing this for the command buttons that are present in my page.
unable to load tag .NameSpace xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
Tag :commondutton..
I have included the namespace on the page and i dont understand why is it throwing me this errror.
Can i know ,what libraries are required and for this namespace to be loaded.It should automatically load the libraries even if it is unable to load.
Please help me.
Rajesh.

[CS3/JS] Changing the appearance of the index (-title)

Hi there,
I´ve got just a simple question thats driving me crazy.
When I´m generating an index manually there is a dialog where I can enter the "Title" and the "Title Style".
Where are these options in the InDesign object model?
I´ve searched the Index-, IndexSection- (don´t even know what that is) and Topic-Object but i couldn´t figure out an attribute like appliedTitleStyle or titleStyle or even title itself...
Can anyone point me to the right place in the object model?
Thanks Tom

Hi Tom77, Peter,
Having a collection for indexes when there can only be one index is the same as having a collection for texts when there can be only one text object (in a given container). Basically, the plural/singular structure is something we have to do to maintain compatibility across all of the languages, as well as consistency between object types.
Thanks,
Ole

How to Aviod the appearance of the MIDlet Name From The Screen

hi
I am working with Mobile application,
while running the application the MIDlet file name is always visible on the screen. So that the image moved down and partly hiden.
how to aviod this problem

Hi Radhika,
I tried doing that with a couple of invoices but I dont see the Long text printed on the check after the automatic payment run. Can you please suggest me if I am missing on anything. I inserted a long text and a '*" before this to have it printed on the check which does not seem to work. Can you please suggest me alternative solution.
Thanks in advance.
Ramya

Cinnamon change the appearance of the panel

Hello my panel is default and I do not like it, I would like to have my panel similar like this.
http://fc06.deviantart.net/fs70/i/2011/ … 4eusi2.jpg
How do I change my panel? and also I want my panel not at the bottom but on the left side.
Thank you.
Last edited by ralph026 (2015-04-29 18:16:16)

To move the panel on the left or right side not possible. to change the look you need cinnamon themes and to move the applets, but it will not look like that because thats a picture of gnome.
Last edited by blisbell (2015-04-29 19:37:31)

When i would to update mac os10.7 to mac os combined10.7.4 the appear error the update couldn't be verified.it may have been corrupted during downloading....please guide me.tnx

when i would to update mac os10.7 to mac os combined10.7.4 ,after finishing download appears the error the update couldn't be verified.it may have been corrupted during downloading....please guide me.
my laptop type is MC724
tnx

The first thing to attempt is restarting in Safe Mode, this will clear some caches. It's possible one or more has become corrupt. Once it has started navigate to 10.6.8 Update Combo and download and install per the directions. After it has installed if you still have difficulty re-starting, go to System Preferences - Startup Disk and make sure the internal HD is highlighted and click restart again and restart again in Safe Mode. Finally restart normally.
BTW I have asked the moderator to remove the serial number of your machine for your own security. Please DO NOT post private information such as email addresses, serial numbers etc.. to a public forum.

Can the appearance of the Calendar in Maverick be improved?

Similar Messages

Maybe you are looking for