Can the arrangement of Video 7 Audio tracks be changed in Elements 11

I am accustomed to Prem. pro where the video tracks are grouped & the audio tracks are grouped in a different group on the timeline.
Can this be done in Elements 11?
Details please.

Only to a degree. In PrE, one can display either Audio Tracks, or Video Tracks, or both, grouped as they are, with Video Tracks and Audio Tracks next to each other.
Personally, I like the PrPro layout better, as I nearly always work on Video first, and then Audio later on. However, many PrPro users beg for the PrE layout. I find it occupies a lot of real estate, and really like the separation much better.
I am going to Move this thread out to the main PrE Forum, so that others can comment, as they will likely not see it here.
Good luck,
Hunt

Similar Messages

  • On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

    On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
    Thanks in advance for your help!

    With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

  • When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    Does it not play at all or cannot you get the audio in the timeline?
    Did you copy the entire card to the hdd and then imported the file via the Media Browser?
    Did you source patch the audio tracks?

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How can I change the gain on one audio track in the selection?

    How can I change the gain on one audio track in the selection? Is there a way to adjust the gain as it is implemented for example in cubase - pull waveform up and gain varies?

    I'm not sure what you mean by "in the selection", or, more honest: I don't understand that at all.
    So, instead I'm going to tell you that you can indeed adjust the Gain of one or more selected region(s) in the Region inspector on the left hand side.

  • DVD Studio Pro 4 Looping Video/Audio Track to Continuously Replay?

    Do I need to script to continuously replay video audio track?
    Is there a template already written for a script?
    Thanks much,
    Chuck

    Hi - welcome to the discussions.
    You don't need to script it if all you want to do is repeat the track over and over. All you do is set the end jump of the track to go to the same track.
    However, if you want to repeat just a short audio clip over and over whilst a longer video plays then what you do is add the audio repeatedly to the track until you get to the end of the video. You can't set the audio up differently to the video, you have to play both at the same time.

  • Can't add a new audio track without any settings

    Can anyone tell me were faced with the same problem. Doing audio post production in Logic Pro X, the latest version, the project is big, At some stage the work I was faced with the fact that you can't add a new audio track without any settings, no matter what inserts I track with duplicate settings of one of the tracks and it begins to sound with this track. I don't add a new audio track with duplicate settings. I add a new one, and I still opens the track with some sort of settings. What is it? This is a glitch or I'm somewhere that we have not considered? Duplicates the configuration of one of the tracks collected in group 1, which I did for editing convenience. Duplicates and also automation and if the new track am I doing something then this machine is transferred to the existing track from this group.

    Everything works in full 'Logic Pro X' mode. It's just a glitch in my project. The problem while you decide this: I insert a new track and it reset and set the output.

  • With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my UBS microphone?

    With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my USB microphone?

    larryh
    Please remind us on what computer operating system your Premiere Elements 13 is running
    Using your own music.....
    Yes, with important but.....
    Details
    If your music is from iTunes, more than likely you will get some sort of error message from the program when you try to import the iTunes music into Premiere Elements (most versions including 13). In that case, please convert the iTunes music to the wav version in iTunes using the following iTunes instructions.
    iTunes: How to convert a song to a different file format - Apple Support
    If you are getting program error message using Premiere Elements 13 Add Media/Files and Folder with other than iTunes music, please give the source and properties of that music.
    Using USB Microphone....Not recommended by Adobe....See Adobe ReMe
    Details
    As for Premiere Elements narration clips using the its Narration Tool
    1. Adobe documentation indicates the USB microphone do not work in Premiere Elements and suggest the use of microphones that connect to the computer via computer jack.
    But, there are some scattered cases where the user has found a USB microphone that has worked for him or her.
    2. Be sure to check Edit Menu/Preferences/Audio Hardware ASIO settings to assure that Input and Output are enabled.
    3. There have been reports (Premiere Elements several versions) where addition of narration using the Narration Tool results in loss of pre-existing
    sound on numbered audio track clips and soundtrack.
    ATR Premiere Elements Troubleshooting: PE12: Audio Losses After Narration Addition
    4. In my particular Premiere Elements 13 on Windows 8.1 64 bit, I have found that I need to set the Mic Sensitivity all the way to the left to avoid
    serious audio distortion.
    I have tried to give you an overview to avoid surprises if you have not used the features that you pointed to in your thread question. Please let me know if you need further information.
    Thank you.
    ATR

  • How can I convert Itunes video albums tracks to ipod tracks

    How can I convert Itunes video albums tracks to ipod tracks?

    3pg is an odd format... That or I just never seen it before. :P
    iTunes just ***** at converting videos. So far all videos I tried converting with iTunes have resulted in the same error you got.
    You're better-off using 3rd party apps, and then copying to iTunes, and then copying to the iPod.
    Unfortunately I don't know of any conversion programs for Windows.
    If you by chance have a mac, this program works great: http://www.apple.com/downloads/macosx/video/flv2itunes.html
    The mac version of Handbrake below works great, hopefully the Windows version does, too:
    http://handbrake.fr/?article=download
    When converting with handbrake, make sure to use the iPod preset for the out-put video.
    Hope this helps a little.

  • Reducuing the volume in the middle of an audio track

    I am having a problem trying to figure out how to reduce the volume in the middle of an audio track.  Can someone enlighten me?

    Brucek75,
    There are several ways to attenuate Volume of Audio in PrE. This article goes into detail on several of those: http://forums.adobe.com/message/3472343#3472343
    The Audio Volume Keyframes (applied in at least one of two ways), will do exactly what you want.
    Good luck, and hope that helps.
    Hunt

  • Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

    Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

    Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
    If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
    and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
    Good luck Derek

  • What is the shortcut to lock audio tracks? (like in FCP)

    what is the shortcut to lock audio tracks? (like in FCP)

    Hi basvanteylingen,
    That feature is coming in the next update.
    Thanks,
    Kevin

  • Can the volume for downloaded music tracks be synced and how

    can the volume for downloaded music tracks from itunes be synced and how if so

    Hard to know what the cause is  because it's like this
    I know what I did to cause this. I upgraded my one of my hard drives, renamed the drive and moved the folder. The missing pictures it can't find were added with the option in the advance menu "copy photo to library" turned off.
    and this
    What I did is added a small SSD as my primary drive. Put the OS and all the apps on it.  Moved my iPhoto and iTunes libraries to an large external.  Most of the picture it is not having a problem wth.  Only certain ones.  Don't actually think I unchecked tha prefeence, but it's acting like i have.  
    seem to be written by two different people.
    This thread
    https://discussions.apple.com/thread/3216539?tstart=30
    has details on how one user hacked the SQL database to fix the issue. Not for the faint hearted. Back up first.
    Regards
    TD

  • I am new to ios & using 5C. I want to know where is all the media (Images, videos, Audio etc) received through Whatsapp are saved after downloading in Iphone. And also how to access the same.

    I am new to ios & using 5C. I want to know where is all the media (Images, videos, Audio etc) received through Whatsapp are saved after downloading  in Iphone. And also how to access the same.

    These are user to user forums.  You ARE NOT addressing Apple by posting here.
    Also, why are you YELLING at us??  Stop using ALL CAPS.
    What steps have you done to try and fix the problem?

  • DATALOAD.ERR: Can the default location of this file be changed?

    DATALOAD.ERR: Can the default location of this file be changed? I couldn't find any indication that this is possible in the Admin manual.Thanks!Vladimir Stojanovski Independent Consultant [email protected]

    not sure that i understand your question, but make sure that there are no spaces in the path that you are trying to load the file from. c:\My Documents\text.txtshould bec:\MyDocuments\text.txthope that helps.

Maybe you are looking for