Can the audio for the source monitor be muted during playback?

Seems like a silly question but I like to listen to music on the same workstation while I'm previewing/trimming clips in the source monitor. In this instance I do not need to preview the audio in the clips so I'd rather not hear it while my jams are playing, which keeps me from poking my eye out with a pen after 4 hours of previewing .
I have not been able to locate any mute option for the source monitor so I'm open to suggestions other then using something other than the same workstation (iPod n headphones), which may be the way I go if there is no other option.
thanks,
Dave

Hey Harm,
I can't see the audio tracks in the source monitor (CS4). I only see the audio tracks of clips that are loaded in a timeline. Right now I have a thousand (literally) clips from a season of club volleyball. I have them loaded in bins in the project panel and I am dbl clicking each clip to load it in the source monitor panel (that I have undocked and displayed on a seperate monitor). I have seperate sequences for the types of plays I want to keep, so as I preview/trim in the source monitor I drop what I want to keep in the appropriate timeline/sequence. If there is a way to view the audio tracks in the source monitor without the clips being in a timeline I do not know how.

Similar Messages

  • I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1.  Thanks for any input.

  • Trying to record Stereo Mix with a monitor through my headphones.  Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

    Basically, what I am trying to do is this:
    Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio.  I have all that figured out.  I'm able to efficiently record my audio and screenplay through these instruments and programs.  What I am having trouble with is the stereo mix.  I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone.  I want there to be no external sound except me talking into my microphone.  I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
    Problems I have run into so far:
    -Haven't gotten it to pick up in game audio at all while using headphone.  Can't figure this out
         -Downloaded soundflower, have the output as soundflower.  Not picking up anything, will put all my sound and midi settings at the end.
    -When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
         -I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't      figure it out
    -Trying not to run 16 million programs while running the game, will cause lag.
    Summed up:
    Trying to record:
    -Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
    -Record voice through Avid MBox Mini and MXL 909 microphone.
    -Record screen gameplay through Screenium
    I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps.  That is done and these are my current settings:
    Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record.  Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
    Sound Settings - Output Stereo Mix (custom channel)  Input Avid MBox Mini (recording)
    I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it.  I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
    My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5  2.4 GHz Intel Core i7 4GB 13333 MGz DDR3  (If any of this is imporant)

    Hey guys,
    I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
    What software are you using to record your game?
    If anyone knows anything different, please let me know.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • How can we monitor the audio after the cleanup process before we actually record the trans

    I have the Sound Blaster Audigy 2 ZS board and I am using it to transfer vinyl records to make CDs. Before my upgrading of Creative Media Source 2 to Creative Media Source 5, I was able to monitor the audio after the cleanup prior to the transfering process. Now I can only monitor the sound at the line input point and not after the cleanup process. Is there any way that we can do that?Vinylrecord

    Assuming you mean Actions when you say "Batches", use this menu...
    1.  Click on the name of the actions set you wish to save.
    2.  Click the fly-out menu icon at the upper-right corner.
    3.  Save Actions, put them someplace on your hard drive other than in the Photoshop installation area.
    -Noel

  • Hi guys, I've been given some .mov files to use. When I play them I can hear the audio but the pictures are green. The client says they play for him. I am on mac 10.5.8 and FCP 6.0.6. Any clues as to why this is happening?

    Hi guys,
    I've been given some .mov files to use on FCP.
    When I play them I can hear the audio but the pictures are green. The client says they play for him.
    I am on mac 10.5.8 and FCP 6.0.6.
    The files details are the same as a file that will play.
    Apple Mpeg IMX 625/50
    (50 Mbs)
    720 x 576 millions
    16-bit Integer (Little Edition)
    I've been told this happened to somebody else last week, but didn't get a resaon why.
    Any clues as to why this is happening? I suspect it's a codec issue of some sort
    Cheers,
    G

    FC 6 supports 29.97 & 25 IMX frame rates but a third party plug-in is required:
    http://manuals.info.apple.com/en_US/FCP6_HD_and_Broadcast_Formats.pdf
    This plug-in costs $100
    http://www.nanocosmos.de/v4/en/products/quicktimeIMX.html
    This software is cheaper at $30 and will let you test drive it for free
    http://www.pavtube.com/guide/working-with-xdcam-imx-media-in-fcp-avid-imovie-ppr o.html
    There may be a free option available but I'm not aware of it. 

  • HT5100 I can download the audio for I tunes U courses but no viedo?

    I can download the audio for Itunes U courses but no viedo?

    What output are you trying to get to your tv?

  • Can I convert the optical output to analog for a zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

    Can I convert the optical output to analog via a converter for  zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

    These will probably help.
    [http://www.jsresources.org/examples/audio_conversion.html]

  • How can I record the audio for a radio station I'm streaming LIVE?

    How can I record the audio for a radio station I'm streaming LIVE?
    I don't want to record the sound in my room, but only on the sound I'm streaming

    Grane Duke wrote:
    To reduce or make the room noise as low as possible (to get the best audio recording), I recommended the OP to try to record the radio live streaming audio in a silent room. Does it makes any sense to you....??
    No. Preferably one records using direct input.
    Your comment  It doen’t matter whether he/she is recording the audio from the macbook or any external speakers because if the room is noisy than obviously the ambient room noise will be recorded.  is pretty silly really. Think about what you just wrote.
    And you do have a bad habbit in your posts of over using ???????? & !!!!!!!!!!!!!
    One is enough.
    Cheers
    Pete

  • The old Apple TV had a port for Analog the new one does not.  Where do I find a (TosLink), Optical to Analog Audio for the Optical Output on the Apple TV so I can run my Analog outside speakers?

    Where do I find a TosLink, Optical to Analog Audio for the Optical Output on the Apple TV 2? 

    click here for information.

  • On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

    On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
    When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

    I tried to update and it keeps telling me to get the Application Manager. And this is what happens
    Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
    Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
    I followed the instructions it gave me to correct this issue:
    If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
    #Restart the computer and try the installation again.
    #If the installation fails, delete the InProgress registry key: 
    Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft. 
    Launch Windows Registry Editor.
    (Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
    (Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
    Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
    Delete the InProgress key.
    I was not able to find the "InProgress" key.

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • How can I modify the UI for the crystalreportviewer prompt screen ?

    <p>Hi,</p><p> I am using Crystal Report XI with JRC.</p><p>I have come across a couple of issues. My report accepts 2 parameters from the user. One is a date field and the other is the &#39;Period&#39;. I have provided a drop-down having values as Daily, Weekly, Monthly, Quarterly, Yearly.</p><p> The following are the issues that I have come across:</p><p>1. Selecting a value from the drop-down and submitting the form gives the following error.</p><p>     [java] 17:46:20,265 INFO  [STDOUT] 17:46:20,265 ERROR [com.businessobjects.reports.sdk.JRCCommunicationAdapter] JRCAgent11 detected an exception: The value for parameter `Period` must match one of the specified default values.<br />     [java]     at com.crystaldecisions.reports.dataengine.d.case(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.dataengine.d.at(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.dataengine.d.new(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.common.as.a(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.common.ae.a(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.b.k.a(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.b.s.do(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.else(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.for(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.do(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.if(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.u.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.DataDefController.a(Unknown Sour<br />ce)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.modify(<br />Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.modify(<br />Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.setCurr<br />entValues(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPromptParameterF<br />ields(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPromptPa<br />rameterFields(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPr<br />omptParameterFields(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPromptParam<br />eterFields(Unknown Source)</p><p> When in the report I set allowcustomvalues to true then it accepts the value selected from the dropdown. But in this case the prompt screen shows a textbox next to the drop-down that gets populated on selecting any option from the dropdown. This textbox is editable and can accept any value. Is there a way I can get rid of this textbox. Also i would like to know why the drop-dwon by itself is incapable of passing the value.</p><p> 2. Secondly, Is there anyway I can change the UI for the crystalreportviewer prompt screen being displayed for accepting the parameters from the user. As per my clients requirement the messages displayed in the prompt screen should be customised.</p><p>3. The third issue is with the date parameter. When a date is selected using the calender control the textbox gets populated in the following format Date(yyyy,mm,dd). My requirement is that this should be a userfriendly format like mm-dd-yyyy. I have succesfully modified the crystalreportviewer javascript so that the calender returns the date in the required format i.e. mm-dd-yyyy. But in this case the date parameter is not accepted though no error is displayed on the console. I have tried rechanging the format into Date(yyyy,mm,dd) before the prompt form is submitted but even this didnot help. What can I do to overcome this problem? </p><p>Any help with respect to the above problems will be highly appreciated.</p><p>Thanks & Regards</p>

    <p>From the looks of it, the default parameter prompt screen isn&#39;t really fitting your requirements.  You have a number of requests for modification.</p><p>In your case I think the best thing to do would be to create your own parameter prompt screen.  You can use the SDK to create a page that works for all reports by inspecting the reports parameters before you set the values.</p><p>This would allow you the flexibility of easily meeting your customers requirements.</p><p>Point 1 - I&#39;m not sure.</p><p>Point 2 - There isn&#39;t much access to change the prompt screen.</p><p>Point 3 - I&#39;m not sure why you would want to change the formatting of the Date when you are already using a calendar object to get it.  It sounds like you might have a small mistake in the way you edited the javascript.</p><p>I really think you are probably better off creating your own prompt screen. <br /></p><p>Rob Horne<br /><a href="/blog/10">Rob&#39;s blog - http://diamond.businessobjects.com/blog/10</a></p>

  • An error occurred while loading the model for the item or data source 'EntityDataSource'.

    Hi Team,
    We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
    Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
    “An error occurred while loading the model for the item or data source
    'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
    Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
    Installed SharePoint Server 2013 Enterprise edition
    Did not configure it at this time
    Installed SQL Server 2012 with default instance installation (selected every features)
    Later installed SP1 for SQL Server 2012
    After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
    Again installed another Analysis Server and selected the tabular mode of data model
    Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
    Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
    Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances. 
    Questions/Doubts are:
    Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
    Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
    CTP3 software for Power View feature as mentioned in the below link.
    http://technet.microsoft.com/en-us/library/jj219634.aspx
    but we don’t have an option to download CTP3 software now from Microsoft site
    Or do we need to install
    Microsoft SQL Server 2012 With Power View For Multidimensional Models
    CTP
    http://www.microsoft.com/en-sg/download/details.aspx?id=35822
    Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
    http://www.microsoft.com/en-in/download/details.aspx?id=35575
    Error detail :
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
    xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
    the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
    the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
    cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
    cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
    /></detail>
    Please help me in  configuring Power View for SharePoint 2013.
    Thanks in advance.
    Pavan Kumar

    I'll bet that I know the answer to this one - and you probably won't like it ;)
    Here's the telling portion of that error:  "We cannot locate a server to load the workbook Data Model."
    This error is thrown in two scenarios; the first, when you haven't registered an analysis server.  The second appears to be the issue you're having:
    PowerPivot requires SQL Server 2012 SP1.  Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
    Check the version of SQL that you are running.  It should be version 11.0.3000 or greater.  If it's not, you have the wrong "SP1" installed.  The correct one is
    here.
    Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed.  You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
    the databases.  Once you've done that, PowerPivot and PowerView will work properly.
    I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • Can you please update the link for the flash player standalone installer?

    Can you please update the link for the flash player standalone installer?
    Link: http://fpdownload.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_plugin_debug_3 2bit.exe
    Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller
    Source: http://forums.adobe.com/thread/889580

    Dogs Key wrote:
    Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller
    That is an old document (Flash Player 10.3) that shouldn't be there anymore.  (The English document redirects to the link below.)
    The download links for the offline installers for FP 11.2 are here http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment
    I have updated the download links for FP 10.3 in http://forums.adobe.com/thread/889580

Maybe you are looking for