Can the brushes be mapped to the area below the viewer window?

I have sent in a recommendation to map the brushes individually so you don't have to select the brush icon then the brush you want. But I am just wondering if there is a way somewhere to do this and I just don't know about it?
I would like to map the brushes individually below the Viewer window or in full screen mode so I can quickly switch between them.

I agree. The Radial Menu is extremely fast and useful once you get used to it.
You can still map the proper brush commands to single keys on the keyboard and use that. And most (all?) the Quick Brushes are still just two clicks away on the Toolstrip.
You can make a feature request for more and customizable buttons on the Toolstrip: "Aperture→Provide Aperture Feedback".
Message was edited by: Kirby Krieger

Similar Messages

HT204380 Can you FaceTime between 2 iPads that are using the same apple ID but separate emails?

Can you FaceTime between 2 iPads that are using the same apple ID but separate emails?

Yes......I do so all the time.

Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom

Friends:
Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom? For example I would like to use the shadow, clarity, lens correction and such tools but cannot find them in Photoshop.
Thanks amigos
Migs

The obvious or not so obvious first. Depending on your knowledge. When you open a tiff, jpg, or camera' raw format they can be opened in Adobe Camera raw first which has identicle controls to lightroom's develop module.
Starting with I beleive CS5 maybe 4, some of the tools made their way into photoshop it self. Take a look at the camera lens filter, the Image>Adjustment menu or the adjustment layers which now support vibrance for example.

Can you track 2 iPhones if they are on the same apple I'd without using icloud

Can you track 2 iPhones if they are on the same apple I'd without using icloud

Well I have iCloud on mine but she has not updated her phone on hers but she can track me and not vice versa

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

I have created a merged letter (mail merge) using Word for Mac. But I cannot merge the letter to my contacts which are in the Apple Mail Application. Is it possible to do this?

I have created a merged letter (mail merge) using Word for Mac. But I cannot merge the letter to my contacts which are in the Apple Mail Application. Is it possible to do this?
Word for Mac 8
i mac intel

This is the Apple Keynote discussion, you should post in the Microsoft forums where the experts there can help you, there is a dedicated mailmarge discussion here: Microsoft Office Word Mailmerge

I have two Apple IDs and when I got an Iphone 6, only the apps from one Apple ID are on the phone. How do I get my other apps on there?

I (stupidly) have two Apple IDs and when I got an Iphone 6, only the apps from one Apple ID are on the phone. How do I get my other apps (from my old Iphone 4) on my new Iphone? Thanks

You can use the same appleid that you purchased the apps with on the phone for the App store. Settings> iTunes & App Store and continue to use the other id for everything else allowing you to have access to your previously purchased apps. You can then either sync or download the apps without paying for them again.
It can be quite handy having two appleids - it can be quite useful if you can manage them correctly. One id for the store and one for imessage is good for privacy if you have the same id in use on another device.

In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?

In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?

Select the Viewing tab in the Mail preferences dialog and uncheck the box marked Use classic layout.

When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box, for a specific area on the page...instead of it going on in one straight long line...?

When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box on a specific area of the page...instead of the text box going on in one straight long line....? I'm not seeing there's an option or ability to do so, just wanting to confirm.

Improving the handling of multiple line text fields is in our plans, but for now, you will have to add manual carriage returns (Enter).
Thanks,
Josh

Adobe acrobat pro x change the program's default page display to single page view - Windows 8, HP La

adobe acrobat pro x change the program's default page display to single page view - Windows 8, HP Laptop

Since there were no answers, I will take a stab at a reponse. For the 2nd method, I suspect you could simply select the print or press job options to get the desired results or turn off "use local fonts" in Acrobat. If you check the font list, the fonts are probably not embedded and that is likely the problem.
I noticed that you have both Reader and Acrobat installed and that might cause some conflict, but should not be the issue here. If you were to uninstall Reader, you would have to repair Acrobat. The conflict here is that you might have problems with the one opening when you want the other. If it works for you, then don't worry about it.
For technique 1, I suspect you may be using IE 9 that has apparently been a problem since it came out. I have refused to install it. However, it may simply be that PDF Maker does not work correctly with your browser, or got deactivated and needs to be allowed to run in your browser (IE I am assuming).

Why is the brush tool in Illustrator CC inferior to the brush tool in CS6? It has less control of fidelity and smoothness. It is terrible - and I'm an illustrator. Can I use the CS6 brush engin in CC?

I loved the brush tool in CS6 Illustrator- by turning fidelity to the lowest setting, and smoothness down to zero, pumping up pressure sensitivity, it accurately reproduced the fine shapes of a drawn stroke. I'm an illustrator, so I don't want artificially smoothed curves, I want the line I drew.
This works really well with my Wacom Cintiq tablet... but now CC has removed this level of customisation for the brush tool. WHY? The program is called Illustrator, and as an illustrator, I can tell you having an accurate and finely adjustable brush engine to illustrate with is very important to me and to lots of other people who can draw, and draw for a living.
Now you get this dumbed down control panel when you double click on the brush tool icon- just one slider, with only 4 steps from 'accurate' (not very) to 'smooth' (almost indistiguishable from 'accurate')... it is like I have contracted a nerve disease - I draw a line, and it forms into something quite different to the path my pen took. WHY? Can I get rid of this rubbish engine? Trying the blob brush - what is the point of this brush? It is just like the old brush, except for a cursor that shows the largest size for pressure sensitivity... and it has the same crude 4 step smooth/accurate adjuster, that doesn't change the line much at all. I have the latest driver in my Cintiq, so I don't think that is the issue, and CS6 works better than CC.
I am very disappointed, Adobe. Do I have to go back to CS6 for all my Illustration work? Please improve the CC brush tool controls.
I am still reeling from Adobe's quiet removal of a whole tool: Inverse Kinematics/Bone tool from Flash CC JUST when I was finally using it to animate, but that's another story.
Honestly, having use them for a while, Photoshop,
Illlustrator, InDesign and Flash CC are, as far as I can tell, no step up at all from CS6, except that you have to pay for them forever.

More on this, now becoming known as the CC pencil tool fiasco, on these fora:
Re: PLEASE PLEASE adobe. The new pencil tool has become unusuble to me
Re: Changing line fidelity with CS6 Brush Tool
Re: All pressure sensitive brush presets gone!
If you are affected by the lower accuracy controls for CC's brush or pencil tools, use this Bug report/Feature request form to let the folks at Adobe know- they are actually hopefully going to fix this.......
thanks to Daniel for setting this up:
hey all, if you are going to file a bug report (as per Neeraj's suggestion), i've made up a draft to make the process easier. feel free to adjust it as much as you want, obviously; trying to equip us busy folk.
Obviously customer service & product development are two different departments, so if you're bummin out on the new functionality, submit a bug report!
link to submit bug report:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
******BUG******
Concise problem statement:
I was told to by Neeraj N(staff) to report this issue based on this link : (http://forums.adobe.com/message/6065706).
The Pencil / Brush tools have lost essential functionality with the addition of the new accurate / smooth adjustment preset. Users are no longer able to specify high-accuracy pen mapping, as the finest accuracy setting is now set to 2.5px (legacy versions allowed accuracy to .5px).
I would think adding additional slider nodes to allow more accurate mapping (while still using the accurate / smooth preset) allow for a minimal change in programming with a maximum return for power users.
Steps to reproduce bug:
1. open illustrator
2. use either pencil or brush tool.
3. draw erratic and high detail shapes
Results: shapes are smoothed to 2.5px smoothness, even when the accurate / smooth adjustment preset is set to full accuracy.
Expected results: shapes have minimal / no smoothing to maintain the integrity of the artwork.
Thank you for your consideration.

HT4356 Do I need an App to print from my iPad to my new HP AirPrint capable printer? My iPad says it can't find a printer and we are on the same network.

I have a new HP LaserJet M1217nfw MFP that is supposed to have air print. My iPad isn't reading it. Is there something special I need to do? Both are on the same network and my laptop is working fine with it. Any suggestions?

1. Make sure it's setup for network printing
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
2. You can try using this App
http://i1224.photobucket.com/albums/ee374/Diavonex/6df9f88d.jpg
3. Reboot router, printer and iPad if necessary

I'm exporting files from a wedding and some of them are below the requested 12mb jpeg. I've shot in raw and have done a little cropping in places. how can I maintain at least 12mb. HELP thanks

please help.
I'm using mac
5D mark III

Do you know why the images are less than 12MB? Have you used too much NR or cropped them too small or are you resizing them smaller than their native size? Or did your camera have reasonably low megapixels to begin with?
Not resizing smaller and setting the quality to 100 will minimize the compression of the images and maximize their size at their native pixel resolution.
Dialing back on the noise-reduction and/or increasing the sharpness will also increase their size but that may be detrimental to the look of the photo.
If they still aren’t 12MB at their native size and quality of 100, then you can increase the filesize by upsizing them to larger than native pixel dimensions, which seems silly, but if the contract has that stipulation then that’s the only thing you can do.
Having used a larger sensor camera, like a Nikon D800 or D810 is another way to have had larger JPGs to begin with.

How can i make the navigation easier in my content area? (TREE VIEW)

Now I use 1 navbar for my whole content area.
This is what I want :
I would like to navigatie in my content area lik I navigate in the explorer of microsoft.
Is there a script,
portlet, or something like that.
when I delete a folder it must automaticle disapear from the tree view.
When I add it must be displayed.
When the folder isn't public it, the public can't see it
thxc in advance
Bert Leeman

If you are using the same nav bar you could build a custom nav bar in the shared objects and publish it as a portlet. In the properties of a folder you can assign an image for the nav bar. This could make it look like a tree assuming you build the images that way. Also your folder links should disappear from the nav bar when they are deleted. I think.

Can a single applet write to several areas of the screen?

If you stick several copies of some graphic into a webpage, hopefully the browser will be smart enough only to request one copy. A related thing that would be desirable would be to have a single applet that could paint into different areas of the display (even if multiple instances of the applet ultimately are created).
Does anybody know offhand if that's possible, and how to do it?

Hi Thomas:
If you stick several copies of some graphic into a webpage, hopefully the browser will be smart
enough only to request one copy. If you examined your temporary internet files folder (assuming that you're using IE), you should only find one cached copy of the graphic file.
related thing that would be desirable would be to have a single applet that could paint into different
areas of the displayAltho I have never tried this myself, I am sure that if you create several <DIV> or <LAYER> tags, you can target the applet's display to screen location occupied by these tags with the use of JAVA<-->JAVASCRIPT communication via the JSObject (JavaScript Object).
;o)
V.V.

Can the brushes be mapped to the area below the viewer window?

Similar Messages

Maybe you are looking for