Can the C6-01 be set up so the screen lights up wh...

Hi,
I've just received a C6-01, and I've noticed when a text is received and the screen doesn't light up as with previous Nokia's I've owned, the notification light simply flashes. When the phone is on silent this is frustrating because i have to keep checking to see if I've got a text by looking at the notification light (which is quite hard to notice as it's quite dim). Are there any solutions/downloads for this, I've looked through the user guides and online and can't find anything.
Thanks!

Install "Nokia Sleeping Screen" from the Nokia store app on your phone, it will animate the screen when you have a message making it easy to see.
http://store.ovi.com/content/212990

Similar Messages

Can the screen from a 20" 2004 be used to replace a broken screen in a 2006?

I have a 2006 iMac G5 with a broken screen (20"). I also have a 2004 G5 with a bad video card. Can the screen from the 2004 fit into the 2006 as a replacement?

You need to be able to:
- Read those files from your old machine.
- Transfer them to the new machine.
Unless you were intending to buy an external drive anyway, you don't need to buy the external drive just to transfer files. As long as your old machine is connected on the same network, you can transfer the files using Network File Sharing from your PC to your Mac.
I would however recommend purchasing the drive to use for backups with your Mac. Time Machine on Mac makes backups a breeze.

The screen light on my nokia 5800 doesn't go out w...

Hi all, I am having a nightmare with my phone. I don't recall making any changes to the settings, but when I use the slider button on the side of the phone to lock the phone, the screen light doesn't go out as it has done previously? The result of this is that my battery life if almost half what it was.
Can anyone help me please, I have looked in every setting known to me and consulted the manual but still no solution.
Thanks is advance guys

i dont understand why there are so many issues with peoples 5800
i have none....ABSOLUTELY NONE!!!!
i know youve said youve done nothing with the settings but can you try
settings.....phone.....phone management....auto keyguard....change that to 1 min
(01:00) or just make sure it isnt some bizarre number......
also try to see if you have a correct setting in "light time-out"
settings.......phone....display........light time-out
make sure no bizzare number is there either.......
hope this helps

HT1386 After upgrading itune on my computer to 10.5 and after upgrading to ios 5 on my 3g iphone, and after backup on my computer, my iphone simplay cannot open up. The screen lights up but it I keep getting the message, "there is no sim in your phone. Th

I have upgraded itunes on m computer to 10.5. When I connected my iphone to the computer I was told that ios 5 is ready to be downloaded, and that I should back up my iphone before doing the download. I did. Now I want to get my iphone back on and it just can't . The screen lights up, i select language and network but it tells me that my phone cannot be activated because the activation service is temporarily unavailable. what do i do?

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

When I press to the left of the home button, the screen lights up

When I press to the left of my home button, the screen lights up as if I were pressing the actual button. This causes Siri to pop up randomly all the time and my phone keeps accidently taking screen shots. Should I take it in?

I was a little confused when I first read this, but I think I understand what you mean now. The bottom left part of the glass on the front of the iPhone, by the home button, can cause it to act like you're pressing the home button. I do not experience this issue on my iPhone 5. This is probably a small defect in your iPhone. It isn't major, though, I'm sure if you visit the Genius Bar in your nearest Apple Store, you can get advice from the experts on what to do.

I have an ipod classic where the screen lights up but is completely blank so am not able to access any music,playlist or menu etc.Any idea how to fix this

I have an Ipod Classic and currently the screen lights up but no information appears - just a blank back lit screen.Any ideas how to rectify or is it beyond saving?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

When i open my macbook pro- the screen lights up and then goes black-

When I open my Macbook pro- the screen lights up and then goes black- keybook stays backlite- can not get screen to come back on. Must reboot-
thoughts-?? Macbook is 6 months old and on second hard drive ( failure after 45 days).

Hey! exact same thing happens to me... I use the keyboard shortcut to turn off the screen which is ctrl - shift - eject button. Then just poke a key and it wakes up again fine, it doesn't fix the problem but at elast you don't have to reboot. x

The screen lights wont turn on my ipad

I need help.. all of a sudden the screen lights on my ipad wont come on
I hold the home button and sleep button at the same time
but still nothing happen

Hold those two buttons for 10-15 seconds (until the Apple logo appears. If it does not, take it in for diagnosis.
Barry

HT1937 I have a stain on the left side of the screen light brown suddenly appeared

I have a stain on the left side of the screen light brown suddenly appeared

Hello Amirbar,
For more information on this, take a look at this article:
How to clean Apple products
http://support.apple.com/kb/HT3226?viewlocale=da_DK
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a nice day,
Mario

How do I keep the screen light from going out after a few seconds

How do I keep the screen light from going out after a few seconds on my iphone

Settings>General>Auto-Lock

HT201210 THE screen light of my I phone 3Gs is not on...it always off from past few days

THE screen light of my I phone 3Gs is not on...it always off from past few days

Hey Arun1205,
That definitely sounds frustrating. We'll need to isolate this issue to figure out if it is indeed hardware:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display has no backlight or dark screen
- Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
- Try turning iPhone off and then on again.
- While connected to the iPhone charger, try to reset the iPhone.
- If the low-battery screen appears, charge the iPhone.
Thanks,
Matt M.

My macbook 3.1 screen goes dark after a period of use; but if i readjust the screen (close it to about a 30 degree angle) the screen light is on again

my macbook 3.1 screen goes dark after a period of use; but if i readjust the screen (close it to about a 30 degree angle) the screen light is on again. i don't have an external monitor, so i just deal with it. i'm about done dealing with it and am wondering if anyone else had/has this problem, and how did you solve it?

You have a hardware problem. It needs to be fixed.
Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

My ipad will not turn on when I plug it up, the screen light will occasionally blink

my ipad will not turn on when I plug it up, the screen light will occasionally blink, thank you

First, make sure that it's fully charged.
Then, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Can the screen be cropped to and exported at a custom aspect ratio?

I think I'm needing Premier to do something it's just not designed to do. What I need to do is to take five or six different screen and audio captures of the same event (a 3D virtual reality instructional session), each representing a different person's view of that event, assemble those in a split screen, synchronize them to the designated "main" capture's audio, delete the other audio tracks, and add CG title labeling each one. The effect is like looking at a display showing six security camera images. From what I can determine, it is possible to do those things in Premier.
However, what I then need to do is to crop out any extra space to the left and right of that split-screen image and export the file as a .mov with the aspect ratio produced by the cropping so that the videos are as large as possible and are not distorted from resizing them to fit the standard aspect ratio. Depending on the size of the screencaps, the resulting .mov might have nearly a 1:1 ratio. What is critical for this is that the video be as large as possible and the "black" space be as small as possible so that the person who comes in later to analyze these composite videos can see everything as clearly as possible. I also need to crop on the fly; because these images aren't always captured at the same size, it is impossible to preset a size for the resulting video.
We've been using a screen capture tool to do this that works but is a pain; clips can only be moved and resized by mouse-drags, and the software has to import to and export from its own proprietary format, which is very slow. However, ever piece of "real" video editing software I've looked at only seems to export in TV or film aspect ratios. Quicktime Pro looked for a bit like the best bet, but it doesn't seem to be able to handle multiple audio tracks (which are necessary since I have to synchronize tracks by ear much of the time).
Is what I'm describing--exporting .mov files while preserving custom aspect ratios that are created by cropping during editing--something Premier can do? If so, would it be something fairly easy for complete novices to do?

medeamajic wrote:
On a Mac based system ScreenFlow might work best but on the PC side FRAPS might work best. You can do what you want to do with Premiere Pro once you record the screen capture. As Stephen_Spider mentioned you might need to crop and even resize the images. FRAPS can record at 1/4 the screen resolution and still have decent results. PP CS 5.5 can play several layers (6 PIPs) of the FRAPS codec at 1/4 resolution in realtime.
Thanks, but we cannot change the screen recording process. According to the study's protocols, the virtual world has to be full-screen or almost nearly so during the session, and that full screen has to be captured for analysis. Resizing the screen captures is not a problem (especially since I already said I'm doing that), but if you're saying that Premier can only play back up to six screen captures simultaneously if they're captured at 1/4 screen, then that's a deal-breaker right there.
By the way, here's approximately what each of the completed composite videos looks like:
Screencap 1
Screencap 2
Screencap 3
Screencap 4
Screencap 5
Screencap 6
Each screencaptures is resized to the largest consistent size that will fit into this format, and then the resulting video is cropped to the outside border. If there are only five screencaptures, I simply center the single one on the bottom on the "center line."
And, to be clear (though I've said this several times already), this is something that is already being done. We probably have more than 60 of these .mov files, each around 45 minutes long, with five or six synchronized screen captures in each. Frame rate etc. has not been any issue with these, and neither has playback of the .mov file from HD or DVD.
Message was edited by: singerm2

TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Can the C6-01 be set up so the screen lights up wh...

Similar Messages

Maybe you are looking for