Can the Canon Pixma ix 6520 support manual duplex printing?

I know that this printer doesn't support duplex printing but I was wondering how would I double side print manually with the canon pixma ix6520?
Thanks!

Hello thekay94.
Manual duplex printing can be done by printing on one side at a time. 
If you are printing from a Windows computer, please select the Duplex printing option in the Page Setup tab of the Printing Preferences menu.  If you are printing from a Mac, please use the options in the Layout menu to print the odd pages first, then load the stack back in the printer with the blank side facing you to print on the even numbered pages.
If immediate assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?

    Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?    Thank you

    Mail updates are usually part of OSX System Updates and no stand-alone updates.
    Try downloading and installing the 10.6.8 Combo Updater from here http://support.apple.com/kb/DL1399
    Stefan

  • Can the Canon Pixma MX922 print pictures at only 4 x 6? If so, any other recommendations?

    I am looking for a printer that primarily prints photos. I am looking for one that can various sized photos, hopefully from wallet size, to bigger. Any suggestions would be greatly appreciated!

    OK. Understood. Easy Print Pro, which comes with the printer, will allow various layouts. You could do multiple wallet size on 4x6 or letter size.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Where can I find a tutorial for the Canon Pixma MG6220

    I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intimidating to use some of its features and have had no luck in finding a tutorial online-------can anyone help me?????

    I dont know how I did it: I have found the manual, but it's extremely confusing. I am 70, not quite as old as the questioner.  I find this manual has too much content and I cannot find what I need (like almost every web page!). 
    We just bought the pixma MG6220 and have installed the driver on both our computers, and it's supposed to work wirelessly, and it does. Mine is a macbook air and we had to use the external drive to do the installation.
    But when it came to scanning photos in order to add them to the digital ones, the scanner could only find my husband's PC, not my macbook. I understand that you cannot simultaneously use both computers to scan. Do I have to switch off the other computer to use mine? Or do I have to attach the laptop with a wire to the printer. My laptop is near the new printer, but the husband's PC and modem are further away - but they work. I have spent several hours trying to solve this, which should have a very simple answer, but can find nothing. I didn't understand 99 per cent of the content of the manual, which is very disempowering. Could it not "hide" the more obscure content and make it accessible via specific links. I do not want to plug in the external drive every time I want to use the scanner or printer (I lose the mouse function).
    I also find it hard to navigate these community pages! What is tagging?

  • Does OS 10 support the Canon Pixma mini260 printer?

    Does OS 10.10.1 support the Canon Pixma mini260 printer?

    The last driver that Canon released for this model was for OS X 10.7 and earlier. Here is a link to that driver. You may be able to install this driver on 10.10, although Gatekeeper will block its installation due to its digital signature. So you will have to right-click on the installer and select Open from the pop-up menu. You will then get the option to install the driver.

  • My Canon Pixma MG 7100 makes 2-sided printing the default. How can I change that to 1-sided for defa

    My Canon Pixma MG 7100 makes 2-sided printing the default. How can I change that to 1-sided for defa

    Hi janekieschninck,
    If the printer is currently set to perform duplex (2-sided) printing, you can turn off the setting by deselecting the option in the printer driver. Please follow the instructions at the link below associated with your operating system to find where the duplex feature is located for your operating system:
    Duplex printing - Mac
    Duplex printing - Windows
    Hope this helps!
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Help!!!! I had to uninstall and then re-install the canon pixma mg3220 printer . Cannot find toolbar

    Help!  I had to uninstal and then re-instal the Canon Pixma MG 3220 printer.  Now, I cannot find the L shaped toolbar.  It doesn't exist.  Is there some way to get it installed on to my computer Windows 8.1????

    Do you mean Canon Quick Menu?  You can download it here:
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_print...
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How's the Canon Pixma MP960?

    Anyone have good or bad experiences with the Canon Pixma MP960? I'm seriously considering it. Especially interested in how well the scanner works.
    I've been having problems with my HP 7410 cutting off scans when I use the ADF, so I'd appreciate any advice or comments you can offer.
    Thanks in advance,
    /rb

    Looking at the specs an the Canon Aus web site, this model doesn't have a document feeder. And it also doesn't have fax, which you mentioned in your wish list in a previous posting. So I don't know if this changes your interest in the 960?

  • HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

    Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

    Hi, I can't see why not...
    Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
    http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

  • Managing Color with LR and the Canon Pixma Pro 9000 10.1.2.0 printer driver

    I would like help understanding how to manage color in LIghtroom with the Canon Pro 9000 10.1.2.0 printer driver. When I ask LR to manage color in the Printing Module Color Management Profile, it warns me to turn off the printer managing color. But I cannot find where to do this in the driver.
    The Color Options menu in the driver gives an additional choice for "Color Mode", but there are no choices here except "Standard", "Linear" or "Tone". The only Canon documentation I can find shows a choice to turn off printer management here, but this driver doesn't give me that choice.
    If I look in the driver's "Color Matching", I see only two choices: ColorSync or Vendor Matching. ColorSync brings up Canon profiles like "Pro9000 Fine Art Photo Rag", but selecting one of these gives a warning of unexpected results. This pushes me back to Vendor Matching. But is this turning off the printer driver and leaving it to Lightroom?
    Right now, I am getting the best results from choosing "Managed by Printer" in LR's Color Management Profile, and setting "Color Matching" in the Canon driver to "Vendor Matching". If I instead choose one of the Canon profiles in LR's Color Management Profile (and it tells me to turn off the printer managing, which I cannot do), then my prints have a slightly bluer color cast.
    Is there a way to turn off the printer managing color in this driver and turn this over to LR, or am I getting the best results possible with the printer managing color anyway?
    I am using a 2.4 GHz Intel iMac with OS 10.5.4, 2 gigs SDRAM, standard ATI Radeon HD 2600 Pro video card. I downloaded the Canon printer driver from their website, so I assume this is the latest. there is another driver available at their website, but for a lower bit depth. Should I abandon the 10.1.2.0 for this other one? I work with Nikon D300 NEFs, and I assumed the higher bit depth printer driver will work better with these images.
    Any help will be greatly appreciated!

    Dear DYP: Unfortunately, those choices are not available in the 10.1.2.0 Canon Printer driver. There are only 2 radio buttons, ColorSync and Vendor Matching. ColorSync then provides a drop-down menu, with no choice for turning off the printer driver.
    But I think I found the answer. I found a deeply buried FAQ on the Canon site (no direct URL; sorry!) Here it says:
    "Issue: How do I disable the printer driver color correction when using the CUPS driver in Mac OS X 10.5.x?
    Solution: Change color management options for printing (Mac OS X 10.5.x)
    Change color management options for printing
    Open the document you wish to print.
    Click 'File' and then click 'Print.'
    Note: If the Print window contains only two pop-up menus, click the triangle beside the Printer pop-up menu for expanded options.
    Select 'Color Matching' from the Print Options pop-up menu.
    Select 'ColorSync' if you want the application you are using, and not the printer driver, to control the color management of the printed output.
    Note: If you are using Adobe Photoshop CS2 or CS3 and have selected 'Let Photoshop Determine Colors', the 'Color Matching' from the Print Options pop-up menu is automatically set to 'ColorSync.'
    Select 'Vendor Matching' if you want the printer driver to control the color management of the printed output."
    I tried it, and chose "Automatic" as a choice in ColorSync. The choices under "Color Options" are then greyed out, implying that the Canon driver is now turned off.
    The prints came out great, with no color cast, and a little brighter than the printer managed prints.
    So, Vendor Managed means printer manages, ColorSync means LR manages.
    Thanks, everyone, for keeping me going on tracking this down!

  • I have the latest mac desktop  op mountain lion,plugged in the canon pixma ip90v and get a message drawing too much power from usb and it won't work?

    I cannot get the canon pixma ip90v to work with the computer.I get a message about drawing too much power from the usb.

    You need to plug in the power cord that was included with the printer and then use it with USB, or use the power cord included with the printer and access it wirelessly from your iMac. I access my Canon MP560 wirelessly from my iMac, which works well. 

  • Can the sony handycam dcr-hc30 support more than the original 512mb memory? Thanks.

    Can the sony handycam dcr-hc30 support more than the original 512mb memory? Thanks.

    According to this compatibility chart: http://esupport.sony.com/perl/support-info.pl?&info_id=11 the DCR-HC30 can use the following cards:Memory Stick Duo Pro - 1 GB, 2 GB, and 4GBMark 2 Memory Stick Duo Pro - 1 GB, 2 GB, and 4GB.You might want to read the chart to make sure I was reading it correctly.

  • How do you set a Canon Pixma MP280 All-in-One Photo Printer , to mirror image for shirt transfers ?

    How do you set a Canon Pixma MP280 All-in-One Photo Printer , to mirror image for shirt transfers ?  Im really having  hard time so any help needed . 

    Hello. When printing on T-Shirt Transfer media, please change the Media Type setting to T-Shirt Transfer before printing.  This can be specified in the print menu of your software. If you need assistance with locating the Media Type options, please tell us what version of Windows or Mac OSX is on your computer. This didn't answer your question or issue? Find more help at Contact Us.  

  • Being new to working with Mac, I was wondering if anyone can tell me how to set my Mac Book Pro wirelessly to the Canon Pixma Pro9000 Mark ll? My husband had gotten this printer and the sales person said that it can be set up wirelessly to my Mac Book Pro

    Being new to working with a Mac, I was wondering if anyone can tell me step, by step on how to set up my Mac Book Pro(Mid 2012) wirelessly to a Canon Pixma Pro9000 Mark ll that my husband had gotten me? Sales person told him that it's compatiable to my Mac Book Pro, Mtn Lion, but I do not see it and I don't see how to do it wirelessly. Any help would be appreciated. Thanks ;o)

    Hello:
    There is nothing wrong with asking questions.  There  are no dumb questions....answers, yes, but not questions. 
    If you set up your wi-fi router to establish a network, then both your printer and MacBook Pro will connect wirelessly.  *** I do not know what kind of router you possess, I don't want to suggest things that might not be relevant.
    Barry
    P.S. No need to apologize!  Most of the people here (none of us are Apple employees) enjoy trying to help others. 

  • Does osx10.6 support printeroptions of the Canon Pixma MP500?

    I have recently connected my canonpixma mp500 to my macbook with osx10.6. In windows I had all the printer options (like double sided printing and grayscaling or colour) available. But now with osx10.6 on my Mac I can not find them anymore. Not in system preferences- printing/faxing anyway.
    I have installed the latest apple driver updates for the canonprinters.
    Do these drivers support the options selecting of the canon printer, which I had before on windows?
    peterwillem

    To access the printer options, you cannot do so via the System Preferences > Print & Fax. While this would be the case with Windows, Mac OS X requires you to access the menus via the application print dialog.
    With the latest v10.26 driver Canon has provided for 10.6, all the print options are located under four added menus - Quality & Media, Color Options, Borderless Printing and Duplex Printing & Margin.
    If you open an application like TextEdit and then select to print, you will first need to see the expanded print dialog, which you access by pressing the little triangle next to the printer name. Then if you click on the TextEdit menu you will see all the settings mentioned above.
    Pahu

Maybe you are looking for