Can the case and screen be replaced if dropped

My daughter pushed my Imac off our bartop....  Corner is smashed...  Can I drop this off at an Apple store to be repaired?  Thank you

How old is it?   Is it insured?   Do you have good and recent back ups?  
It may be better to buy a refurbished replacement because as Mike says, repairing the one you have could be pretty pricey.

Similar Messages

  • My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

    My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

    Hi there Graham!
    I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
    iTunes: Purchasing and viewing HD videos
    http://support.apple.com/kb/ht3209
    Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Hope that helps. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Do all your cases and screen covers for MacBook air 2010-2011 fit the 2012 model

    Do all your cases and screen covers for MacBook air 2010-2011 fit the 2012 model

    Upon receiving my 2012 MBA, I removed the inCase hard shell from my 2011 model and fitted it to my 2012 unit. The fit is identical. Dimensionally they are the same.
    So, if you are asking do all of mine fit? Yes they do.

  • My Ipad is just over a year old.  I just got a blue screen, then it shut down.  I pushed the power and screen buttons together and it came back, but then went down again and now I can't get it to power up.  Any suggestions.

    Can anyone help with the blue screen I just got.  Tried to power back up like one Apple user suggested by holding the power and screen button together, came back briefly, then shut down.  Now nothing.  Any help?

    Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • How can the symbol and non-English diacritical marking, etc accessed with combinations of letters and functional keys prior to Snow Leopard be achieved in Snow Leopard?

    How can the symbol and non-English diacritical marking/punctuation pallet, available in pre-Snow Leopard OSes with various combinations of letter or number keys and functional keys, be accessed in Snow Leopard?  Those pre-Snow Leopard versions worked on the fly as one was making text in any pedestrian application and its native font (Mail, Text Edit, for example).  One didn't need to dig around in font libraries, change font preferences, etc.

    > One didn't need to dig around in font libraries, change font
    > preferences, etc.
    It hasn't worked like that since the Early Chalcolithic (ie, System 7 or thereabouts).
    You've already got plenty of answers. Briefly (and grossly oversimplified),
    - Mac OS X conforms to a standard known as Unicode; in its current incarnation, it defines over 100k characters.
    - A keypress is translated into a character according to the current keyboard layout.
    - The graphic representation of a character (ie, glyph), is provided by the current font.
    - If a font lacks a glyph for the requested character, either another font will be automatically chosen (Mac OS X text engine), or some form of feedback (empty box, question mark, etc) will be used.
    - To inspect the actual key codes, use a utility such as Key Codes.
    - To inspect the current keyboard layout, invoke Keyboard Viewer.
    - To inspect the full complement of glyphs of a font, invoke Character Viewer (also accessed with the Special Characters command).
    (Remember that both these utilities are resizable and zoomable -- you can enlarge them to a comfortable viewing size, then zoom out to see more of the screen for your original task.)
    - For a more detailed look, use a utility such as UnicodeChecker.
    - The default keyboard layout depends on your Mac OS X localisation.
    (Keep in mind that there's no need to stick with the default layout; choose whichever one makes sense to you, given your language, habits, and proclivities. Mac OS X comes bundled with quite a few, including some obviously designed for the huddled masses of refugees from the Dark Side, who, in their wretched ignorance, have the unmitigated gall of labelling our native ways "really uncomfortable". Oh well, this, too, shall pass.
    If none of the supplied keyboard layouts fits your needs -- if, for instance, you write your emails in Etruscan -- go out on the 'net, you'll find quite a few. Or write your own with Ukulele, it's not really all that difficult.)
    - Use Keyboard Viewer to familiarise yourself with the current layout and to enter the odd character; but, to be proficient, you should learn your layout to the point that KV is no longer needed.
    - Use Character Viewer to enter the odd character not available in the current keyboard layout.
    Neither Keyboard Viewer nor Character Viewer are effective tools for more extensive needs, eg, for writing and editing bilingual or multilingual texts. In such a case, you should enable the respective keyboard layouts and switch between them with a keyboard shortcut.
    A few interesting layouts bundled with Mac OS X have already been mentioned. Let me add three.
    - Dvorak: several layouts based on the Dvorak keyboard. It is claimed that the latter is more productive and lessens RSI risk.
    - US Extended: based on QWERTY, it offers a more extensive set of diacritics (eg, caron, breve) via dead keys.
    - Unicode Hex Input: also based QWERTY, it allows input by Unicode codepoint (in hexadecimal), so it's the most extensive layout of all; eg, to enter the character "Parenthesized Number Twelve" (U+247F), hold down Option, type "247f", release Option.

  • I lost my ipod around downtown Hamilton Ontario it has a Minion case and and school officer card inbetween the case and ipod i think i lost it at bay front

    please help me find it this i pod means everything it has a minion case with one foot breaking off the back of ipod is silver there is a pic of me so a girl as the wallpaper and screen saver  there are pics of my and a ginger who is my bf and pics of my friends there will be a pic in photos of my boyfriends tattoo it says harrison  there are alot of games my facebook is loged in so if u find it go on fb and make a status or inbox my self so ik someone found it please people help me find this ipod it means everything.
    <Personal Information Edited by Host>

    If you set up the Find My iPod service prior to the iPod going missing, then there is a chance that can be tracked, though it depends on a number of factors: the iPod is turned on, connected to a WiFi network, and has not had the Find My iPod service disabled. Log into icloud.com and go to the Find My iPhone section. Note, though, that you'll only get the location of the WiFi router to which the iPod is connected; there's no way to pinpoint the exact location of the iPod itself.
    If you did not set up Find My iPod, then there is no way to track it. Notify the police and merchants in the area, and change any passwords for any online accounts you may have used from your iPod (the iTunes Store, for instance). 
    Regards.

  • Xperia Z3 best case and screen protector

    Can anyone tell me their top recommendation for a suitable case and screen protector for the Xperia Z3 smartphone please.
    Looked on Amazon and still can't decide. Wanna get a case to protect it re dropping and protect the screen getting dirty quickly or scratched.
    Your help's appreciated!

    For the screeb you could use a tempered glass screen protector
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Accidently deleted the "desktop and screen saver" icon

    Hi,
    I accidently deleted the desktop and screen saver icon from the system preferences. I deleted it from the trash too, is there anything I can do to get it back?
    Thanks

    laur.son wrote:
    Hi,
    I accidently deleted the desktop and screen saver icon from the system preferences. I deleted it from the trash too, is there anything I can do to get it back?
    Thanks
    Welcome to Apple Discussions:
    Exactly how did you delete it?
    Not knowing what computer or OS you are using, it's not possible to provide any help. We need more info and a filled-in profile.
    You can always restore the system from your backup.

  • I have an older 30 gb classic ipod.Can the 3.5mm"jack" be replaced inside?

    I have an older 30gb classic ipod. Can the "jack" sleeve inside be replaced or fixed? the prong connection inside has broke off and you need to push the jack to one side to get both sides of the earbuds to work. Thanks

    Try trashing your iPod's Photo cache and then resyncing your iPod.  See this article to help you determine the location of your iPod's Photo cache on your PC.
    iTunes: Understanding the iPod Photo Cache folder
    B-rock

  • Can the case be changed while uploading the data or after uploading ????

    hi all ,
    can u pls help me ???  can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last)  condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

    this is the itab declaration ..
    data: begin of it_input occurs 0 ,
           tra          like tstc-tcode,
         end of it_input.
    and then from the uploaded data the prog should check wheather it is having any userexits or not ...
    here comes the code...
    sort it_input by tra.
    delete adjacent duplicates from it_input  .
    loop at it_input.
               it_itab-sno = sy-tabix.
      select single * from tstc where tcode eq it_input-tra.
    if sy-subrc eq 0.
        select single devclass from tadir into v_devclass
                 where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
             if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
             move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
           if sy-subrc = 0.
            select single * from tstct where sprsl eq sy-langu and
                                            tcode eq it_input-tra.
                      if not jtab[] is initial.
               loop at jtab.
                    select single modtext from modsapt  into str
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                    it_itab-tra        = it_input-tra.
                    it_itab-i_obj_name = jtab-obj_name.
                    it_itab-i_modtext = str.
                    append it_itab.
                    str = ''.
               endloop.
              endif.
            else.
                    it_itab-tra        = it_input-tra .
                    it_itab-i_obj_name = ' '.
                    it_itab-i_modtext = 'No user Exit exists'.
                     append it_itab.
            endif.
          else.
                    it_itab-tra        = it_input-tra .
                    it_itab-i_obj_name = ' '.
                    it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                     append it_itab.
          endif.
    endloop.

  • Can the position and szing of a control element in a View be controlled from the ViewModel?

    Is it possible to change the position of a control, say a label, as a response to some action/operation from the ViewModel?  Like if one response to something is true then place the label in the top left corner.  If false, place the label
    in the lower right corner.  I realize you could have a label in each position and just set the visibility.  But can the position and sizing of said label be controlled from the View Model?  What would be a sample coding of this?  would
    it be in the xaml or combination of a method in the ViewModel and the xaml? 
    Rich P

    First off Rich, say TextBlock to yourself ten times.
    Use a TextBlock rather than a label.
    There are a bunch of different ways to do this and the easiest is to have two controls whose text is bound to the one property.
    Bind the Visibility of each to another 2 properties in the viewmodel.
    Collapse one and Visible the other.
    The reason for that is that it's easier.
    Technically, you could put one textblock in a grid and use margin to control this.  You could animate x y co-ordinates and move the textblock mysteriously across the window if you put your mind to it.
    Or you could put it in a row/column "cell" of a grid and change which cell it goes in - but that would involve some mechanism like messaging from the viewmodel to the view and is not really ideal if you can avoid it.
    I'd have a pair of textblocks, here's one:
    <TextBlock Name="TopLeftMsg"
    Text="{Binding Msg}"
    Visiblity="{Binding TopLeftVis}"
    Both would bind to a public string property msg in the viewmodel.
    They each get their own public visibility property  and that'd be switched between Visibility.Visible and Visibility.Collapsed.
    Sizing of textblocks is best fitted to content because all you see is the text.
    Textboxes are arguably different because you can see the things.
    Hope that helps.
    Recent Technet articles:
    Property List Editing;  
    Dynamic XAML

  • I have an 8 year old eMac G3. It will not start up. I need to erase it before putting it in recycling. Apple refuses to open the case and warns me that I will be shocked if I even try. They say no way to erase hard drive. They say use a hammer. Any ideas?

    I have an 8 year old eMac G3. It will not start up. I need to erase it before putting it in recycling. Apple refuses to open the case and warns me that I will be shocked if I even try. They say no way to erase hard drive. They say use a hammer. Any ideas?

    Hi, no eMacs had G3s, only G4s. Is it maybe an iMac G3?
    If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
    http://www.chipmunk.nl/klantenservice/applemodel.html
    http://www.appleserialnumberinfo.com/Desktop/index.php
    How to find the serial number of your Apple hardware product...
    http://support.apple.com/kb/HT1349
    http://www.ifixit.com/Device/eMac

  • Can the JNLP and the jarred application be on different servers

    Can the JNLP and the jarred application be on different servers? If so, how would I alter my JNLP file to include the url of the second server?
    The reason I ask this is that my app is being uploaded to a shopping cart, to be available for purchase. The problem is that this shopping cart allows ONLY one upload for each item that's available for purchase, and the vendor of my shopping cart say that for security reasons I cannot store files in other places on that server. The problem is that I need the JNLP and the JAR for download. I thought that the simplest solution is to put the JAR on a different server, and in the jnlp specify the URL of the jar. Is that possible? Or, do you see another solution?
    I appreciate your help - I REALLY need to take care of this ASAP!
    Here's my jnlp:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp
    spec="1.0+"
    codebase="http://server_where_jnlp_is/subdir/"
    href="myjnlp.jnlp">
    <information>
    <title>Title</title>
    <vendor>vendor</vendor>
    <homepage href="http://www.homepage.com" />
    <description>bla bla bla</description>
    <icon href="icon.gif"/>
    <offline-allowed/>
    </information>
    <security>
    <all-permissions/>
    </security>
    <resources>
    <j2se version="1.2+" />
    <jar href="myapp.jar"/>
    <nativelib href="libs.jar"/>
    </resources>
    <application-desc />
    </jnlp>

    I worked it out! What I did was I changed the jar href and the nativelib href to point to a different server
    eg:
    changed <jar href="myapp.jar"/>
    to
    <jar href="http://www.otherserver.com/myapp.jar"/>

  • HT201365 How can the iMessages and FaceTime be activated with this new ISO 7 update? When I enter my Apple ID & password it won't do anything. Says waiting for activation!! Help!

    How can the iMessages and FaceTime be activated with this new ISO 7 update? When I enter my Apple ID &amp; password it won't do anything. Says waiting for activation!! Help!

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    -Griff W.

  • How can the ruler and or the measurement tool calibrated? both are totally off.

    how can the ruler and/ or the measurement tool calibrated? both are totally off by various margins.

    skn1868 wrote:
    do you know how to reset the ppi so it is accurate?
    Earlier, I wrote:
    What is the ppi value in the document?  Use the Image - Image Size menu to see or set this value.
    I can't believe this conversation has gone on this long.  You keep wanting it to be a bug, but it seems to me the basic problem here is that you haven't accepted the fact that YOU are responsible for getting the image metadata in order before you can use tools like the Ruler to read out in physical units, such as inches or centimeters, accurately.
    Photoshop can only know the size of things in your document if you or your workflow provide it an accurate ppi value!
    What's the original source of the material?  A scanner?  If so, some part of the scanning or image preparation process has left you with an inaccurate ppi value.
    For the documents you're already working with, use Image - Image Size, then UNcheck the Resample Image checkbox and type in the correct ppi value.  Then everything will work.
    -Noel

Maybe you are looking for