Can the ":" char found in a multiple select list be shown differently?

I have a column which allows multiple values, say "Red, Green, Blue"
When it shows in the report, it shows as "Red:Green:Blue"
Just for aesthetics sake, can the field be shown with "," instead of ":" ???
Thanks!
Claudio

Do it in the query:
SQL> with t as (
2    select 'Red:Green:Blue' col from dual
3    union all
4    select 'Bad:Design:Decision' from dual)
5 select
6           replace(col, ':', ', ') col
7 from
8*           t;
COL
Red, Green, Blue
Bad, Design, Decision

Similar Messages

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

Can I limit the padding of a field (Multiple Selection) ?

I am creating a form in FORMCENTRAL. Can I limit the padding of a field (Multiple Selection) ?

Hi;
You can adjust the size of the outer dotted line surrounding the field from the right side which will reduce the padding. For most of the field types you can adjust the size of the input box, and also the size of the overall field which controls the amount of padding (to the right, can't control top/bottom or left).
Thanks,
Josh

How can i display Value in Report which i select from Multiple select list

Dear All,
i am using multiple select List in form with report page.
When i create new Entry with select Multiple value in Multiple Select List then in report Value display me in below format
my SQL Query are
select NAME D, CODE R from COUNTRY_MAS WHERE ACTIVE_FLG ='Y' order by NAME
AS:AI:AG:AM these are return value .i want to display NAME in report .
How can i do this ?
Thanks
Edited by: Vedant on Apr 25, 2012 11:14 PM

Short answer, use the apex_util.string_to_table to convert to a table; then you can either iterate through the table to generate a string of names, or accomplish the same with a bulk operation.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDFEEJD
Encapsulate all this within a pl/sql function.

Can the GPIB-ENET/100 handle multiple TCP connections?

Can the GPIB-ENET/100 handle multiple TCP connections from multiple computers?
-Daniel

Yes, the GPIB-ENET/100 can handle multiple TCP connections.
To safely access the same GPIB-ENET/100 or GPIB-ENET from multiple applications on one or more computers at the same time, use the iblck function. The iblck function prevents one application from interrupting a call made to the GPIB-ENET/100 or GPIB-ENET from another application. Without it, one application could cause an I/O operation initiated by another application to abort or cause other unexpected behavior.
Check the NI-488.2 User Manual for more details:
http://www.ni.com/pdf/manuals/370428a.pdf
Winston L.
National Instruments

Multiple select list in Safari 8.1 is broken again

Multiple select list is broken again in iOS 8.0.* and 8.1 Safari.
Few temp solutions can be found here until apple fixes this issue again.
Multiple Select box does not retain selected choice
Multiple Select on Safari - iPhone iOS 7

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

InfoPath 2010 - Multiple Selection List Box - Rule Does Not Run When Unchecking Value

I have a multiple selection list box on a form. I have a rule that sets the value of another field. There is not condition. Just any time item is checked or unchecked the value of the other field should
change. This works when checking an item in the list box but not when unchecking the item in the list box. My question is - do rules not fire for a multiple selection list box when unchecking an item?

Hi,
I have tested in my lab environment, the rules seemed only fire for the latest checking action, and it did not fire when uncheck multiple-selection list box. Here is a workaround for your reference:
http://www.infopathdev.com/forums/p/17850/62269.aspx
However, I’d recommend you use check box instead, since it is much easier to set rule according to value of it. We can set it as true when we check the box, and set it as false when we uncheck it as below:
Then it is simple and clear to make rule according to the value of check box.
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Rebecca Tu
TechNet Community Support

Multiple Select List does not Refresh with Dynamic Action

All,
Scenario:
Using APEX 4.2.2, I have a Select List page item (P4_SPONSOR) set to allow multiple values which has a dynamic LOV to populate the list. What I would like to do is highlight the display values based on another page item's value (P4_DRIVER_ID). When I set the source of P4_SPONSOR to static text, such as a delimited string of 1:2:3:4, any display values where the return values are equal to the static text are highlighted when the page loads.
Problem:
The problem lies in trying to use a query as a source for P4_SPONSOR which is filtered based on the other page item, P4_DRIVER_ID. For instance, my SQL Query (returning colon separated values) returns the same as the static text noted above. In the query's WHERE clause, I specify that the driver's ID is equal to P4_DRIVER_ID:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
This, as I understand it, would necessitate a refresh of P4_SPONSOR whenever the value of P4_DRIVER_ID changes. So, I have a Dynamic Action that does just that. When executed on the page, I can see the P4_SPONSOR multiple select list actually refresh, but none of the display values become highlighted.
Thoughts?
Thanks,
-Seth.

Seth,
A dynamic action refresh of your select list will refresh the list of values (this is what you are seeing), it will not refresh the value of the item itself. In fact, it will remove any values that you had already selected. To refresh the value you will need to add additional dynamic actions.
Create another dynamic action with:
Event: After Refresh
Selection Type: Item(s)
Item(s): P4_SPONSOR
If this was a normal select list you could just create a Set Value action and use your query to set the value of the select list. Since this is a multiple select list your will need to get your colon delimited value first and then use some javascript to set the values of your select list.
Create an hidden page item name P4_SPONSOR_TEMP.
Add a true action to your new dynamic action:
Action: Set Value
Set Type: SQL Statement
SQL Statement:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
Page Items to Submit: P4_DRIVER_ID
Selection Type: Item(s)
Item(s): P4_SPONSOR_TEMP
Add another true action to your new dynamic action:
Action: Set Value
Set Type: JavaScript Expression
JavaScript Expression:
$("#P4_SPONSOR_TEMP").val().split(":")
Selection Type: Item(s)
Item(s): P4_SPONSOR
--Jeff

Setting current values in Multiple Select List in SQL Query based Report

Hi,
I have a report based on a sql query that contains a multiple select list. Unfortunately I cannot get the multiple select list to display the current values (p_value) correctly. I have created a page item, :p311_current_versions, that is set using a pre-header process and it returns a value with a colon delimited format e.g. '10.1.2.1.0:10.1.2.2.0'. Then this item is used in the sql query to set the current value (p_value) of the apex_item.select_list_from_query function. However when the table is displayed, instead of having two entries, 10.1.2.1.0 and 10.1.2.2.0 selected, it has an extra entry '10.1.2.1.0:10.1.2.2.0' selected.
Here is my code:
select distinct a.product, a.version from (
select distinct
apex_item.display_and_save(2,product)||apex_item.hidden(1,env_product_id) PRODUCT,
APEX_ITEM.SELECT_LIST_FROM_QUERY(3,decode(product, 'HTTP Server' , :p311_current_versions, version), 'SELECT distinct version d, version r FROM ebs_tech_stack where
product ='''||PRODUCT||'''',
decode(PRODUCT, 'HTTP Server' ,'multiple="multiple" style="width:170px"','style="width:170px"'),
'NO') as version
from ebs_environment_tech_stack
where environment_id = :p311_umgebung_id) a order by a.product
If anyone can help me figure out how to set the current values correctly I'd be really grateful!!
Thanks in advance,
Jean

Jean,
I don't think this is possible using the apex_item package. The select_list_from_query function accepts only a single value for the second parameter.
Scott

Using multiple select lists in ADF

Hi,
I am trying to use a multiple select list in my JSP page, and have a method in the ApplicationModule be called when the Struts action is called. I am following the example ADF tutorials, where the method is added to the ApplicationModule class, then dragged onto the Stuts Flow diagram (to associate it with an action).
I am able to create a dyna form bean for the page that contains the multi select as a type "java.lang.String[]" (string array). I am able get that values that were selected in a normal action's "execute" method. For example:
msf = (DynaActionForm) form;
String[] statusSelection = (String[]) msf.get("multSelectList");
However, I cannot seem to get the "multSelectList" values into a method in my Application Module class. The "multSelectList" is defined in my dynaFormBean as a String[] type. I am passing it in as an argument like the following....
public void setParams(String multSelectList[]) {
This results in the method not being called at all. I am not sure why. Does this have something to do with a String[] not being serializable??
However, if I just attempt to pass other types form items to the method, it works. For example:
public void setParams(String simpleCheckbox) {
Does anyone know how to use multiple select lists in conjunction with ADF?
P.S.
my multSelectList looks something like this:
<select name="multSelectList" multiple size="5">
<option value="ALL">Select All</option>
<option value="preferred">Preferred</option>
<option value="standard">Standard</option>
<option value="approved">Approved</option>
<option value="interim">Interim</option>
</select>

I got this working by changing the signature of the Application Module method to use ArrayList rather than String[], then you can marshal the Struts FormBean contents into an ArrayList to pass up.
To do this, subclass the DataAction by using "Go To Code" off of the context menu and then override the initializeMethodParameters() method:
protected void initializeMethodParameters(DataActionContext actionContext, JUCtrlActionBinding actionBinding)
    //Get the String Array from the Form Bean
    String[] selection = (String[])((DynaActionForm)actionContext.getActionForm()).get("multiSelect");
    //convert that to an ArrayList
    ArrayList selectionArr = new ArrayList( Arrays.asList(selection));
    //Add that object to the Arg List for the AM method
    ArrayList params = new ArrayList();
    params.add(selectionArr);
    actionBinding.setParams(params);
}

Multiple selection lists in abap report

I need to populate a multiple selection list and then read the selection in an ABAP report. A parameter with list box is not solving my purpose.
Please give any suggestion on this.

Hi
If you can't use the SELECT-OPTION statament, there's no standard solution.
U can only try to create a table control with only one colunm and every hit of the table control is a single hit for the selection.
To insert a table control in a selection-screen u need to use the statament:
SELECTION-SCREEN BEGIN OF TABBED (see the help)
In order to create a TAB where u can load a subscreen where u can insert a table control.
The u need to transfer the hit from table control to a range.
Max

How to submit a multiple-selection list box in an Infopath Sharepoint form as multiple entries on a Sharepoint list?

I would like to be able to submit an Infopath form with a multiple selection list box in Sharepoint as multiple entries on a Sharepoint list.
For example, a user has to complete the following fields:
First Name:
Last Name:
Favorite Color (can select more than one):
[] Blue
[] Red
[] Yellow
[] Green
If the user picks blue AND red and submits the form, the Sharepoint list would feature TWO entries, both with their first and last names, but with different colors in the "Favorite Color" column.
Please let me know if there is a way to do this. Any guidance would be helpful!

Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Multiple select list selected options

Hello ;
how can i get the selected options of my multiple selected List
Thankyou

Multiple select list is a concatenated double quote delimited string
value_1:value_2:value_3
Where do you (how do you) want to "get" the selected options? You want to use
the selected value where?
I have couple of demonstrations on how to handle multi-select lists:
http://htmldb.oracle.com/pls/otn/f?p=31517:84
http://htmldb.oracle.com/pls/otn/f?p=31517:87
Denes Kubicek

Multiple selection list and passing that value to oracle reports

Hi
I need to create a multiple selection list and then based on use selection, I need to pass that value to oracle reports. Can any one help with steps on how I can do this. Thanks

Hi
Concatenate the multiple values into a string separated by comma and then pass that string to report as a parameter.
In report query, you have to use the lexical parameter using ' & '
regards
SD

Value of Multiple-Selection List box is not appearing "calculated value" field of it

Hello,
We have created one selection list box using control "Multiple Selection List Box", where user can select one or more values.
We have created one view in InfoPath form, which have calculated value of fields(just showing purpose and printing purpose this view has ben created).
In this when we try to show calculated value of field is of Multiple Selection List Box, it's showing as "Off".
Could you please help us out.
Thanking you in advance.
Regards,
Jayashri

Hi,
Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can the ":" char found in a multiple select list be shown differently?

Similar Messages

Maybe you are looking for