Can the CIM server listen on the HTTPS port 5989?
In the man page of init.wbem it is mentioned that it starts or stops the CIM boot manager.And at startup, the CIM Object Manger Listens for RMI connections on RMI port 5987 and for XML/HTTP connections on HTTP port 5988.
But 5988 is not the secured port and I want the CIMOM to listen on the secured port 5989. CAn we change its configuration to listen on the HTTPS port 5989? and if so how can it be done?
Thanks
The current version of the Solaris CIMOM doesn't support https, which is usually found on port 5989.
Similar Messages
-
How can I open and listen to the PDF documents with audio in my iPad?
How can I open and listen to the PDF documents with audio in my iPad?
You need to use a PDF reader that supports multimedia. Adobe Reader 10.3 does not. Adobe has not stated whether it will support multimedia in the future.
In the meantime, you could buy an application that does like PDF Expert. Read about it here:
Finding the Best Tablet PDF Reader -
Since upgrading iMac to osx lion I have been experiencing problems in mail, it spontaneously stops receiving and tells me it can't find the pop server and also the biggest problem is that when I send with an attachment the recipient doesn't receive it.
I have to restart mail most times before it starts recieving or recognizes the pop server.
As I said a lot of recipients do not recieve my mails when there is an attachment or when I reply to their email.Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Who can explain the message server string in the OSS connection ?
Who can explain the message server string in the OSS connection ?
For example:
MSG SERVER FIELD IS:
/H/128.168.0.28/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
What is the mean to each field in the string?
What does the first "/H" mean?
What does the second "/H" mean?
What does the third "/H" mean?
What does the first "/S" mean?
What does the second "/S" mean?
What does "/oss001" mean?
Thanks .Hi,
when you define techinacal settings in tcode OSS1
Transaction OSS1 -> Parameter -> Technical Settings -> Change -> Save. The SAPOSS destination is only automatically updated when you save.
/H indicate server
/S indicate Service
check following SAP note
Note 33135 - Guidelines for OSS1
regards,
kaushal -
when uploading my email account it also uploaded over 6,000 emails that are on the aol server from over the years, how can I delete all but recent ones?
Unfortunately, there is no easy way. Delete just as you would any other message that you don't want. It's probably just as well that there is no universal deletion capability. I can see many of us committing a major "oops."
-
Hi,
I am trying to create a mobile service and no matter what I do I receive the attached error:
RDFE: The upstream server reported that the resource was not found.
What does this error mean and how do I resolve it.
I have created mobil services on this account a few days ago.. I deleted most of my azure resources and I am not sue I deleted one that is required for thisThanks for reporting this problem. The Mobile Service team is looking into this, and we believe that we identified the issue. We are working on a fix now. I'll let you know when we've resolved the issue.
-
Error 58 The specified server cannot perform the requested operation
Hello,
I will try to explain the situation as brief as possible. Next to our current existing MDT environment (MDT2010 on Windows 2008 R2) we are no building a new system (MDT2013 on WIndows 2012 R2). We have multiple sites and the MDT deployment share is setup
in DFRS share so every site is getting the same deployment information and replication is done automatically. This has been working firn for 3 years with the old system and also with the new environment it was working fine in our own subnet. But when after
i have setup the remote MDT and WDS servers it is not working in these remote sites. The images are loading fine but for some reason the win PE is not connecting to the shares on the windows 2012 server in our site. When i manuualy connect from a remote win
PE to our server i always get the error: system error 58 has occured. The specified server cannot perform the requested operation.
I have been doing some troubleshooting and it seems i only got this issue when i connect from win PE 5.0 to a windows 2012 R2 server in a remote subnet.
When i use win PE 5.0 and connect to a windows 2012 R2 share in the same subnet it connects fine.
When i use win PE 5.0 and connect to a windows 2008 R2 share in a remote subnet it connects fine
When i use an older win PE and i connect to a windows 2012 R2 share in a remote subnet it connects fine
When i use win PE 5.0 and connect to a windows 2012 R2 share in a remote subnet it does NOT connect and gives the above error
The problem is that this problem also does not occure in Windows 7, after the machine was build by MDT and get into the OS i can connect without a problem to the windows 2012 R2 shares.
Checking the event viewer on the 2012 R2 server that is hosting the shares i see that the following events are created:
4624: An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon GUID:
{8e360e91-001b-c726-84a6-e7281a4bcac8}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
x.x.x.x
Source Port:
60077
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The impersonation level field indicates the extent to which a process in the logon session can impersonate.
The authentication information fields provide detailed information about this specific logon request.
- Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
5140:
A network share object was accessed.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Network Information:
Object Type:
File
Source Address:
x.x.x.x
Source Port:
60077
Share Information:
Share Name:
\\*\Captures
Share Path:
\??\D:\Captures
Access Request Information:
Access Mask:
0x1
Accesses:
ReadData (or ListDirectory)
4634:
An account was logged off.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Anyone an idea why this is happening?Hi,
We can refer to the following blog for MDT troubleshooting:
http://blogs.technet.com/b/askcore/archive/2012/05/08/mdt-2010-amp-2012-my-deployment-failed-what-and-where-are-logs-i-should-review.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
"The specified server cannot perform the requested operation" when rpc from server 2003 to Windows 7
I am having problems where all my Windows 2003 servers cannot rpc to 2 of my Windows 7 workstations, error message is "The specified server cannot perform the requested operation".
All the machines are in workgroup environment.
Windows 7 workstations: desk1, desk2, desk3, desk4, desk5, desk6
Windows 2003 servers: server1, server2, server3, server4, server5
Windows 2008 server: server6
From any Windows 7 workstation I can rpc to any other machines,
\\desk1\d$, no problem
From any Windows 2003 server I can rpc to all the machines exception desk4 and desk5, they give the "The specified server cannot perform the requested operation". However, desk4 and desk5 can rpc to any other machines (including the Windows 2003
servers), no problem
From Windows 2008 rpc to desk4 and desk5 also no problem.
I also have no problem rpc between any of the Windows 2003 servers,
\\server2\d$ from server3, no problem.
I turned off the firewall at desk5 and desk4, just to try, but didn't help, same problem. This show firewall is not the cause of the problem.
Desk4 and Desk5 used to run Windows 2012 for 1 year and recently I downgraded them Windows 7 Professional x64. When they were running as Windows 2012, those Windows 2003 servers have no problem rpc to desk5 and desk4.
The issue is thus lying between desk4 and desk5 with Windows 2003 only\
Any suggestions?
Valuable skills are not learned, learned skills aren't valuable.Hi,
I found a related thread and a hotfix for similar issue:
Problems Accessing Administrative Shares Remotely - Windows cannot access \\Servername\ShareName
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9807a799-bea3-46ad-92a5-732779135f98/problems-accessing-administrative-shares-remotely-windows-cannot-access-servernamesharename?forum=winserver8gen
You cannot access an administrative share on a computer after you set the SrvsvcDefaultShareInfo registry entry to configure the default share permissions for a network share
https://support.microsoft.com/kb/971277/en-us
Also please check if it is caused by security program such as antivirus program.
If you have any feedback on our support, please send to [email protected] -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
Hello Experts,
I have complex Biz Talk 2013 farm having 20 servers,15 Hosts. In my production environment even if there is no traffic i am getting throttling errors from SCOM for my all the production hosts.
Error : One of the BizTalk Server processes in the affected computer is being throttled for significant
periods because of high database size exceeding the threshold
I checked following things:
1. MsgBoxDB size 748732 KB
2. Spool table size 53 MB
3. Tracking DB size 26724 KB
4. Host settings -- Message Queue Size = 100, MsgCount = 50000 , Spool MP = 10 , Tracking MP = 10
5. Ran Message Box viewer and did not found any error related to DB size. (which counter i should focus on in MBV)
Note -- for DB i am sharing full backup size because it does not have log file size.
Please suggest where i should focus?
Is SCOM reporting correctly because everything is fine in biztalk ?
Thanks
Yagya
https://www.mcpvirtualbusinesscard.com/VBCServer/card.aspx?tag=YagyaDattMishra&wa=wsignin1.0Hi Yagyam
I remember this error from SCOM when you use the standard SCOM BizTalk pack.
Check the eventlog of the server, do you see any errors in event log, this could give some clue to the root cause. Whenever you have this alert from SCOM, you must have
some entries in eventlog relating to the alert raised by SCOM.
Is your message processing by BizTalk hosts are normal? Run the performance monitor to see the bottleneck. Check if there is really throttling.
As mentioned in this blog, check the state of the SQL Agent on BizTalk's SQL database server, may be try restart the SQL Agent on BizTalk's SQL database server.
http://blogs.msdn.com/b/timdel/archive/2008/11/19/why-i-love-scom.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?
Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution. -
Unable to create the Directory Server entry on the LDAP Console
When I try to create the connection with the Directory Server I get the following message:
Could not contact the DSCC agent on <server>. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11162.
I found a bug related to this issue and installed the patch 123893-15. I restarted the cacaoadm and the console:
root@mntsammx # cacaoadm list-params
snmp-adaptor-port=11161
snmp-adaptor-trap-port=11162
jmxmp-connector-port=11162
commandstream-adaptor-port=11163
rmi-registry-port=11164
secure-webserver-port=11165
java-flags=-Xms4M -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8 -Djava.endorsed.dirs=/usr/lib/cacao/lib/endorsed
micro-agent=false
java-home=/usr/jdk/jdk1.5.0_18
jdmk-home=/usr/share/lib/jdmk
nss-lib-home=/usr/lib/mps/secv1
nss-tools-home=/usr/sfw/bin
retries=4
log-file-limit=1000000
log-file-count=3
log-file-append=true
enable-instrumentation=false
user=root
group=sys
network-bind-address=127.0.0.1
watchdog-heartbeat-timeout=60
And as you can see it is running on that port. What else needs to be done ?
Thanks!Well... this ALMOST worked. I got closer. I found out there are three cacaoadm deamons on the machine, so, I started the correct one at this time:
[server1]/opt/myuser> ps -ef | grep cacao
root 17773 1 0 Jun 12 ? 0:02 /usr/lib/cacao/lib/tools/launch -w /var/cacao/instances/default -L 16384 -P /va
myusermx 22756 20845 0 10:06:14 pts/4 0:00 grep cacao
So, I stopped the old one:
root@server1 # cd /usr/sbin
root@server1 # ./cacaoadm stop
root@server1 # ps -ef |grep cacao
root 23393 23045 0 10:16:20 pts/4 0:00 grep cacao
root@server1 #
Then I changed to the location of the correct one
cd /opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin/
[server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ./cacaoadm set-param network-bind-address=<my_ip>
[server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ./cacaoadm start
[server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ./cacaoadm status
default instance is DISABLED at system startup.
Current retries count : 0/4
Processes:
23755
Uptime: 0 day(s), 0:0
[server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ps -ef | grep cacao
myusermx 23753 1 0 10:17:53 ? 0:00 /opt/myuser/sunoneldap/dsee6/cacao_2/usr/lib/cacao/lib/tools/launch -w /opt/man
myusermx 23918 20845 0 10:18:22 pts/4 0:00 grep cacao
So, I went back to the console, at this time it let me thru the step to accept the certificate, I did click next and an exception was threw. I copied it, but I lost it. After that, I wasn't able to get to the same point again, I am back to the old message that it can't contact the cacaoadm....
Any other inputs? -
From sql developer I am trying to connect to database in my local machine. It shows the following below error. Any suggestions?
An error was encountered performing the requested operation:
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Vendor code 12505lsnrctl results are as shown below
C:\Users\ndodd_000>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:40
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 18-AUG-2013 15:29:41
Uptime 0 days 2 hr. 10 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\ndodd_000\product\11.2.0\dbhome_1\network\admin
\listener.ora
Listener Log File c:\app\ndodd_000\diag\tnslsnr\Vamsi\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service results
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:
:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:186 refused:0 state:ready
LOCAL SERVER
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: VAMSI, pid: 904>
(ADDRESS=(PROTOCOL=tcp)(HOST=Vamsi)(PORT=49237))
The command completed successfully -
I get the following message on trying to send emails from my yahoo account
An error occurred while sending mail. The mail server responded: sorry, the sender name and auth login doesn't coincide (#5.7.1). Please verify that your email address is correct in your Mail preferences and try again.
Help!Check if the client connector used to connect with the 587 port is allowed to accept authentication on Plain Text.
Try a relay connector if you want to send the email without the authentication.
http://technet.microsoft.com/en-us/library/bb232021(v=exchg.141).aspx
Syed MM Messaging SME - IBM || MCTS || MCSE || MCSA || VCP5 || VCA ||
Maybe you are looking for
-
Is there a way to view all the messages in a folder containing subfolders?
I use Mac Mail for my work email (becuase I hate entourage...), but the way it displays messages within folders is really inconvenient. Let's say I have a folder for a client (Brand XYZ) and within that folder I have subfolders (Campaign A, Project B
-
Is it possible to see the timestamp from the camera in my timeline?
I have been given notes to look out for certain things according to the time on the camera from when the clip was recorded. I can see the start and end times for my clips where I import the media clips. I can also see the camera time ticking up when
-
Can't connect a second pc to my e2500
Going through Connect with an easy key, but it stops at 25% every time. The main pc asks me to name the second pc, but connect on the second pc give me the message: We could not connect to your router. The router name and password are correct. This
-
Photos I take with my iPad are not appearing in any album in my photos!
When I first had the iPad the photos I took with it were saved to the cameras roll album. Now they don't seem to be saved anywhere. I can't see anything in the settings or user guide that helps? Any ideas anyone please?
-
It takes several times hitting the home button to get out of an app. Is this normal
It takes me several times to hit the home button to get out of an app is this normal?