Can the Classic display video on its own screen while sending video "out"?

Well, the topic pretty well covers it. I'd like to use the iPod as a monitor while outputting to projector. Any way to do this?

Unfortunately, the new 3rd generation Nanos require the more expensive Composite or Component cables for TV out to work. The cable you are using is the older regular A/V cable.
iPod: TV out support
http://docs.info.apple.com/article.html?artnum=300233
Patrick
p.s. if you DO have the newer composite cable, as shown on the page I linked to, then you might simply have a bad cable, which has been reported here from time to time as happening.

Similar Messages

When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at. How can I force applications to maintain the current state?

iPhone 4S with the latest updates 8.1.3 (12B466) installed.
When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at.
How can I force applications to maintain the current state?
I am in the process of getting enough screenshots to demonstrate further.

ios7 keeps refreshing apps after switching
solcwd

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference. Is there a plug in I need?

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

HT1766 When I turn iPad on I get a box that says Not Enough Storage and neither the Closeor Settings buttons do anything. The iPad turns off on its own. It is full charged.

When I turn iPad on I get a box that says Not Enough Storage and neither the Closeor Settings buttons do anything. The iPad turns off on its own. It is full charged.

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Can a book in Ibook have its own passcode before it can be opened?

Can a book in iBooks have its own passcode before it can be opened? (I wrote a book in IBook Author and exported it to IBooks. Need passcode for privacy reasons).

Oh, that's too bad...well, let me know if they ever come up with that idea. Thanks.

What to do if the apps were closing on its own?

What to do if the appa were closing on its own?

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

The charging display is stuck on my screen

The charging display is stuck on my screen and it won't do anything! I can't turn it on or off or anything else. What should I do?
Dell Windows XP Pro

Are you by any chance using iTunes 7.0.2 and firmware version 1.2?
If you are then I would surmise that you are the victim of a bug in the firmware (if you look at the forum there are thousands of people with the same issue)
Unfortunately for us users Apple appear to be burying their head in the sand on this one because there has been no official recognition of the problem, meanwhile people are continuing to download the firmware, oblivious to the fact that this will render their precious and much loved iPods completely useless.
This is clearly a completely cynical policy by Apple because they know that publicly admitting the problem would seriously harm their sales in the busy Christmas period.......POOR SHOW APPLE!!! THIS WILL HARM YOU MUCH MORE IN THE LONG TERM.
Fear not though, they will not be able to hide it for long because I know that the BBC are investigating this.

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline?

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline? When I press a mobile number in contacts, the phone automatically phones the number. I do not mind this as I hardly ever send texts, but I would like to have the option of what to do. This seems such an obvious issue but I can not solve it even with much web searching. Thanks!

I can't delete my question, so I'll just say that you press on the type of number written in the box to the left of the box you typye the number into. Dumb or what?

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

How can I stop my iPhone 5 from starting the music player randomly on its own?

I have an iPhone 5 running the latest version of iOS. Sometime last year (maybe shortly after I originally upgraded to iOS 7), the phone developed a nasty habit of starting up the music player during phone conversations when I connected to my Mazda's Bluetooth system. Oddly enough, I can hear the music playing over the phone conversation but the person on the other end of the phone line can't. To stop the music, I have to open the Music App and then close the App. Note that the Music App did NOT have to be previously open for the music to start, and the Music App doesn't usually show as an open App even after the music starts on its own. The problem has persisted through the last few iOS updates and it now happens in a broader range of circumstances (e.g., I have told the iPhone to forget the Mazda adapter, and it now does the same thing with my Plantronics Voyager Bluetooth headset). I usually have to go through this sequence at least twice per Bluetooth pairing session before the phone stops trying to start the music player on its own during phone calls.
The problem went away temporarily when I did a full reset of the phone, but it came back after a few days (even when I added apps & music back without restoring from an iOS backup).
Has anyone found a way to fix this problem once and for all? If I can find a fix, it's enough of an annoyance that it might convince me to go Android with my next phone. Thanks in advance...

I've tried syncing with itunes and icloud. The missing contacts are nowhere to be found. I just re-enter them on my iphone and proceed on my not so merry way. Next time I look for a contact, it might be there or it might not. It is not necessarily the same contact. It appears that my oldest contacts seem to be the ones disappearing

Troubles with the sleeper: how can I avoid it restarting on its own?

When on sleeper, my MacPro early 2008 restarts on its own after a while.
Until very recently, it worked perfectly well.

Thanks for your help.
I wonder if the the troubles I have with the sleeper and with the start button are not linked with an issue on the main disk. Apparently, I need to repair my main drive:
- the number of volume files is not valid
- the numner of volume directories is not valid.
2013-12-15 11:02:20 +0100: Utilitaire de disque a commencé.
2013-12-15 11:04:13 +0100: Vérification du volume « 1 Main HD »
2013-12-15 11:04:13 +0100: Démarrage de l’outil de vérification :
2013-12-15 11:04:15 +0100: Vérification en direct en cours.
2013-12-15 11:05:18 +0100: Vérification du volume HFS Plus journalisé.
2013-12-15 11:05:18 +0100: Vérification du fichier de blocs en excès.
2013-12-15 11:05:18 +0100: Vérification du fichier de catalogue.
2013-12-15 11:05:18 +0100: Vérification des fichiers à liens multiples.
2013-12-15 11:05:18 +0100: Vérification de la hiérarchie du catalogue.
2013-12-15 11:05:18 +0100: Vérification du fichier des attributs étendus.
2013-12-15 11:05:18 +0100: Vérification bitmap du volume.
2013-12-15 11:05:18 +0100: Vérification des informations du volume.
2013-12-15 11:05:18 +0100: Nombre de fichiers de volume non valide
2013-12-15 11:05:19 +0100: (normalement 617151 au lieu de 617152)
2013-12-15 11:05:19 +0100: Nombre de répertoires de volume non valide
2013-12-15 11:05:19 +0100: (normalement 173934 au lieu de 173933)
2013-12-15 11:05:19 +0100: Le volume 1 Main HD s’avère corrompu et doit être réparé.
2013-12-15 11:05:19 +0100: Erreur : Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.2013-12-15 11:05:19 +0100:
2013-12-15 11:05:19 +0100: Utilitaire de disque a cessé de vérifier « 1 Main HD »: Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.
2013-12-15 11:05:19 +0100:

Can I give a certain JSP its own thread pool?

Hey all,
          The application I'm working on needs to give a certain JSP its own thread pool so that it does not effect the performance of the other pools. I can create the new thread pool and am trying to set the value in web.xml. Here's my entry:
          <servlet>
          <servlet-name>??????</servlet-name>
          <jsp-file>/search/*.jsp</jsp-file>
          <init-param>
               <param-name>wl-dispatch-policy</param-name>
          <param-value>search</param-value>
          </init-param>
          </servlet>
          Since this is just a JSP can you tell me what I should set the <servlet-name> to?
          Thanks for the help.

you could also try it here:
http://web.mac.com/madmax019/0/mx/Favicons%20%26%20URL%20Icons.html
max

Beer might have gone into MacBook Pro from the back, shut down on its own 5 minutes later. what to do?

I'm currently working in Myanmar and no chance to going into a Mac service provider or store. I was using my Macbook Pro (mid 2010) when beer was spilled onto the table. I lifted the computer instantly and as i did not see liquid on the machine and also it had a protective cover i was sure no liquid got in. I removed the cover and it was dry but then 5 minutes later it shut down on its own and it would not turn back on or charge. I left it for an hour or so and then it turned back on and was charging but then since i thought that may be it was because some liquid got in, I turned it off again immediately and disconnected from power source.
what is the best way to proceed knowing i won't be able to bring it in to a technician anytime soon?

without on hand diagnostics, nobody can tell you the correct answer on that. No.
5 minutes later it shut down on its own and it would not turn back on or charge.
bad news
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

Can the Classic display video on its own screen while sending video "out"?

Similar Messages

Maybe you are looking for