Can the iMac dvd drive read or accept mini-dvds/cds? thanks

Can the iMac dvd drive read or accept minid-dvds/cds? Thanks

Don't even attempt it. It won't work, and the disk will just get stuck in the drive's mechanism. If you want to use mini-disks, you'll need an external tray-loading optical drive.
Regards.

Similar Messages

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

  • Can't get super drive to play disc in dvd player it states disc not supported that for any disc inserted into the player

    can't get super drive to play disc in dvd player it states disc not supported that for any disc inserted into the player

    Hi, not sure it works in 10.9, but...
    DVD Player doesn't like external players, use VLC Player...
    http://www.videolan.org/vlc/
    http://hints.macworld.com/article.php?story=20100208120847220
    http://hints.macworld.com/article.php?story=20111107064435227

  • I burned an edited movie to disc using H.264 codec and a second movie to MPEG -4 Video both worked well on my iMac but will not play on my Sony DVD Recorder/Player which accepts both DVD RW and DVD-RW.  Any suggestions?

    I burned an edited movie to disc using H.264 codec and a second movie using MPEG-4 Video.  Both played well on my iMac but would not play on my Sony DVD Recorder/Player which accepts both DVD+RW and DVD-RW discs.  I have tried other 'codecs' DV-PAL; DVCPRO-PAL; DVCPRO50-PAL; AIC; and finally share to iDVD.  iDVD works on both my iMac and DVD Recorder but the picture is very poor with major shimmering which is unwatchable.  Can anyone assist? The other codecs I used either do not pay on my video recorder or fail when I play them back on my iMac.  I am at a loss as to what I can do.  I am from the UK so using PAL is essential.

    If the source video is interlaced, you may have problems using iMovie. It de-interlaces everything on output which can cause picture to look strange.  Final Cut Pro X supports interlaced video, but it costs a lot more.
    Standard DVD Players don't support H.264 or MPEG4.  You might want to look at this article on transferring HD video to DVD.  I wrote this article mainly for Final Cut Pro, but many of the same principles apply.  

  • Dvd Drive Reads Dvd but not burning Dvd

    Product Name:HP Pavilion 15 Notebook PC
    Operating System: Windows 8 Pro 64-bit 
    Optical DriveVD-RAM UJ8DB
    problem: Dvd drive reads Dvd but fails to burn Dvd.I can hear  a noise from Dvd drive when i insert a blank Dvd to burn.
                        Noise keeps running until i remove Dvd from Dvd drive. please help

    Help us to help you by posting the following information.
    1.  The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
    2.  The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
    3.  Is your notebook still covered under warranty?  Check your warranty status Here.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • My CD/DVD drive will not accept a disk anymore. Any ideas?

    My CD/DVD drive will not accept disks anymore. Any ideas to make this work short of a very expensive replacement?

    Read the os Help menu. 
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive

  • HT4621 can the imac 27" mid 2011 take this ram "Corsair 8GB DDR31600MHz" ? will the imac under clock it to the 1333mhz ?

    can the imac 27" mid 2011 take this ram "Corsair 8GB DDR31600MHz" ? will the imac under clock it to the 1333mhz ?

    As the others have said, this is a really chancey thing to do...there have been several users on here during the past few weeks with questions about using out-of-spec ram...most had trouble with it.  Macs will sometimes accept higher spec memory, sometimes they will not.  Corsair has been getting some very good comments lately but that is from those using in-spec memory.
    Best solution is the correct memory.  And as noonday recommended, Crucial and OWC are very good and stock the correct ram.

  • HP Pavilion DV7 2206TX - DVD drive reads DVDs but not CD's

    My HP Pavilion DV7 2206TX - DVD drive reads DVDs but not CD's.
    When I insert a CD, the drive tries very hard to read the CD but gives up after about a minute.
    I get no error message.  I do not see the Auto play message.
    Windows Explorer does not recognize the DVD drive.
    When I insert a DVD, I get the Autoplay menu, Windows Explorer recognize the drive and the DVD. I can play the DVD using any number of Video players.
    I would welcome advice relating this problem.

    your HP Pavilion needs a new DVD driver. I ran into many problems such as this when troubleshooting computers in school.
    A DVD drive should play CD at any time:  While a CD driver will not play a DVD disc. Do not think there is a problem with sofware because it will only throw your troubleshooting skills  out the window and it will confuse you.

  • Use time machine to save both the iMac hard drive data & an external one

    Can i program time machine to save both the iMac hard drive data & an external one

    Yes, but it's not advised because it's placing too many backups into one hardware basket, also it will greatly shorted your TimeMachine states where you can go back in time to undelete a file.
    It's better to have two backups, each on seperate hardware of each drive.
    So if you have a boot drive and a external drive, you should have a clone drive and TimeMachine drive of the boot drive, and a backup drive of the external drive. (or two depending how valuable the data is)
    If you drop a drive, or knock it over while it's running, all the data could be lost.
    With only TimeMachine as your backup, if you drop or lose it, or if it gets stolen, it takes two backups with it.
    A clone and a backp of the external drive stored safely off site is ideal, update it once a week or bi weekly as needed.
    A clone is bootable, and is exactly like your boot drive, up in seconds.
    A TimeMachine can only boot to restore to a new drive if your boot drive dies for some reason.
    read more here
    Most commonly used backup methods

  • Can the iMac G5 supports TWO USB 7-port Hubs??

    Hi all, call me greedy but belive it or not, I am running out of USB ports!!
    I have a Belkin 7-port USB 2.0 Powered Hub (with 2 ports pointing upbright) which serves me very well, but I am running out of ports, now that I am considering getting the new iPod nano.
    Anyway, there are 3 ports behind the screen, now I have my Mighty Mouse, the Hub's USB cable and a HK Soundsticks attached.
    I am thinking of getting another similar 7-port Hub, they are actually stackable, but of course I won't use all 7 ports fully on the 2nd new one.
    Can the iMac supports and substain 2 USB hubs?? I have actually never seen anyone with more than 1 hub??
    Thanks and cheers

    I have two USB hubs attached to my iMac G5 - they are both self-powered (their own power supply); one is a USB 2 with 6 ports and a multi card reader built in and the other my old USB 1 with 4 ports. They are plugged into the rear of my iMac along with the printer. Everything else, including keyboard and mouse, are plugged into the hubs and I am using a total of 8 ports - and everything works. I don't know if that would change if they weren't self powered.
    Hope this helps.

  • I just purchased an external disk drive to store my pictures.  I want to keep the last 12 months of pictures on my iMac and move the rest to the new external drive.  As new pictures are added I want them to be put on the iMac internal drive.  How?

    I just purchased an external disk drive to store my growing number of pictures.  I want to keep the last 12 months of pictures on my iMac and move the remaining pictures to the new external drive.  As I take more pictures I want them to be put on the iMac internal drive.  Every 3 to 6 months I would then move some additional pictures to the external drive.  I am nuervous about losing any of the pictures and want to make sure I follow the proper procedure.  What is the right way to handle this?
    Thanks.

    Here's one way to do what you want:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    Now you have two full versions of the Library.
    3. On the Internal library, trash the Events you don't want there
    Now you have a full copy of the Library on the External and a smaller subset on the Internal
    Some Notes:
    As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
    You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    You can keep the Library on the external updated with new imports using  iPhoto Library Manager

  • If I erase the imac hard drive will i lose my Discussion ID and alias ?

    Hi,
    Simply put, If I erase the imac hard drive will i lose my Discussion ID
    and alias
    Thanks.
    Eme.

    Hi Niel.
    So i could register in my name, (as a opposed to beaus) and give the computer a new name (long and short) ?
    Apple care would recognize the changes as long as it is the same serial #,
    Is that correct ?
    Thanks again for your help.
    Eme: )
    Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.5)  

  • Can the iMac G5 take advantage of CAS2 or 2.5 RAM?

    Can the iMac G5 take advantage of CAS2 or 2.5 RAM? I know it comes with CAS3 RAM.
    THANKS

    rob_ART:
    i I've run some tests on a Power Mac with mixed results. In most recent tests, I saw an 8% advantage running the RAM preview render in Motion 2 with CAS 2 memory vs CAS 3.
    It's possible to to it any number of ways. Some memory controllers will dumb it down and select one conservative CL value timing and stick with it. Others could bump it up.
    It's unlikely to be that critical. A .5 cycle advantage wouldn't be that noticeable to most people, but some gamers insist on extracting every last bit of performance from their memory.

  • Can the iMac be used as an external monitor for a MacBook?

    Can the iMac be used as an external monitor for a MacBook?

    What iMac is this ?
    If it is a 2009 or 2010 27" iMac than this http://support.apple.com/kb/ht3924 could apply.
    Stefan

  • Can the imac core duo support dual band wifi?

    I have a core duo 2GHz iMac intel. Can the imac core duo support dual band wifi?

    Do you mean will your iMac work with a router that supports dual band? If  this is correct, the answer is yes. If that isn't what you intended please look at the system specification for your machine. You can find that by clicking Support - Tech Specs

Maybe you are looking for