Can the IMAQ 1424 be configured for other digital cameras?

I hope the answer is yes! Because when I read:
�Compatible with Cohu, Dalsa, Hamamatsu, Kodak, and Pulnix cameras�
I didn�t take that to mean
�ONLY COMPATIBLE with Cohu, Dalsa, Hamamatsu, Kodak, and Pulnix cameras�
That is to say I was operating under the impression that you could configure the IMAQ 1424 to work with other cameras, as long as you have all the pertinent information of said camera. What worries me is on my initial attempt in the IMAQ software it says that the option to configure a camera only works for non-digital card/cameras. I haven�t got into the software and hardware in great detail yet, maybe I will find that this is a non-issue but I just thought I would ask,
in that if the answer is no I wont waste anymore time. So, if I can configure the 1424 to work with �OTHER� cameras, can someone point me in the right direction? Thanks a 10^6
Grant

Grant,
Yes, it can be used with other cameras. The list of compatible cameras only includes the ones NI has already written configuration files for.
For cameras not in the list, you need two things. You need a cable that will connect all the appropriate signals. This may require a terminal block or custom cable. You will also need an camera configuration file, that tells the camera how to read the video signal, how to react to different signals, etc. The main problem is that NI does not document the format of the configuration files, so it can be difficult to write your own. They are usually willing to help by writing the basic file, but you are on your own if you want to implement anything fancy. If you study other files, it isn't too difficult to figure
out how to do it.
I would contact NI and discuss the specific camera you are trying to connect to the 1424. If it is a common camera, they may already have the files or cables you need (or know where they can be found). If it is not a common camera, they can tell you what needs to be done and how difficult it will be to do.
Bruce
Bruce Ammons
Ammons Engineering

Similar Messages

  • How do I increase the maximum number of images I can acquire in a sequence using the IMAQ 1424 with 80 MB of onboard memory and a Duncan Tech camera?

    I've increased the maximum number of buffers to higher than I need, but I still cannot acquire more than 139 images with the Duncan Tech digital video camera before I get a memory lock error. Is there any way to increase the number of images I can acquire in a sequence using the IMAQ 1424 with 80MB of onboard memory?

    It sounds like you are already bypassing the onboard memory. If you weren't, you would only be able to acquire about 20 images.
    If I understand correctly, you do not convert the images until after you acquire them. This means each acquired image is 4.13 MB, and 139 images will take 574 MB of memory. I wouldn't be surprised if that was all the free memory available on a 1 GB machine. The operating system, LabVIEW and any other software running probably take up the rest of the memory. You might want to put your computer on a diet and minimize the number of other programs and utilities running. The only other option I see is getting more memory if possible.
    Is there a way that you can reduce the number of images you need to acquire? Pe
    rhaps skipping every other frame? Do you really need more than 139 images?
    Is it possible to acquire the images in monochrome? That would triple the number of images that you could acquire.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • HT4623 I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things

    I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things.
    is there another way i can download the update? it just never work, tried multiple time

    The most common causes are:
    Your antivirus, firewall or router security is blocking access to Apple's servers - try temporarily disabling them - if you have Kaspersky this is definitely the problem
    At some time in the past you used this computer to jailbreak, unlock or otherwise hack ANY iPhone, iPod Touch or iPad - if this applies to you your hosts file is corrupt and you will have to edit it and remove any lines that contain "gs.apple.com"

  • InApp Error on Android: This version of the application is not configured for billing

    Hi,
    My App runs on Android. Free publications can download, but when I publish a folio to sell, it appears on the Android device and it gives the message: "This version of the application is not configured for billing"
    I used the (long) app license code at the API section and pasted it into the android Public Key aria in the DPS Admin.
    Then I logged out and logged in again.
    Any Ideas what could be wrong?

    On google console check merchant account and see if all the bank and tax information settings are filled correctly.

  • Can E51 email key be configured for SMS text inste...

    can E51 email key be configured for SMS text instead of email?
    Like I just want to be able to press the email key to get to sms messages as I use text a lot but never use email on my phone at all.
    Thanks,
    Andy.
    Solved!
    Go to Solution.

    hi andy..
    yes you can.. and i'm already doing that in my E51
    just go to settings --> personalisation then change it
    and please let me know
    Phones I bought from 1st till now:
    3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
    If you like my post or it helped you, Give me Kodo

  • How can delayed delivery update be configured for Inbound delivery ?

    Hi All,
    How can delayed delivery update be configured for Inbound delivery ?
    There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
    Regards
    Jimmi

    Hello Jimmi,
    Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
    664316 Tips for the delayed delivery update for TO
    I hope this information helps!
    Martin

  • Can the MacBook Air work with any other type of internet connection beside wifi?

    Can the MacBook Air work with any other kind of internet connection besides Wifi?

    Who? ITS VERY important when doing a restore, in fact you DO NOT want to do a wifi restore
    The pros all have that Ethernet adapter,... that should tell you something. An Ethernet restore via that "thing" makes restoring the OSX about 8X faster.
    Its called a Gigabit Ethernet adapter for a reason.
    "who the heck" is anyone working with their Macbook Air at home and want a MUCH FASTER download / internet connection.
    *Stockbrokers who pack their Macbook Air, arrive at work and plug that "hardwired" dongle to their Air........  because even seconds in the stock market can make the difference between losing a million $$, or making a million $$
    So now you know WHY,.....before you didnt.

  • On Apple TV. Can the USB port be used for a keyboard and mouse interface

    On Apple TV. Can the USB port be used for a keyboard and mouse interface

    A bluetooth keyboard can be used with the Apple TV.
    There is no need for a mouse with an ATV.

  • Can the H-Squared Air Mount for AirPort Extreme be mounted horizontally on a wall withOUT the Horizontal Adapter?

    Can the H-Squared Air Mount for the Airport Extreme Base Stataion (5th Generation) be mounted horizontally on a wall withOUT also having to buy the Horizontal Adapter (which costs another $14.95)?
    Are there mounting holes in the Air Mount to allow for that?

    Can the H-Squared Air Mount for the Airport Extreme Base Stataion (5th Generation) be mounted horizontally on a wall withOUT also having to buy the Horizontal Adapter (which costs another $14.95)?
    Yes, if you wanted to use a couple of L brackets, you could do this. The chances of the pre-drilled holes in the L brakets  lining up with the pre-drilled holes in the Air Mount are open to question, though. So, you may need to some drilling.
    I suppose you could design your own horizonatal adapter out of wood, but once you did that, you might as well use another piece of wood for the top shelf. Then, you don't need the Air Mount at all.
    Are there mounting holes in the Air Mount to allow for that?
    The Air Mount has a dozen, maybe more pre-drilled holes. As you might imagine, the Horizontal Adapter mates perfectly with the Air Mount.  The picture in the link below will give you a good idea.
    http://h-sq.com/products/airmount/index.html

  • Is it possible to find out if the over print is applied for other than 100% black  object?

    I need to find out the over print is applied for other than 100% black objects in "illustrator cs3" through programmatically. Kindly advice me.

    Anyone please

  • When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

    I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

    It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
    i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room.

  • I put photos from my laptop into my iphone,now I can't delete them. There is no trash can on the screen,but there is for other photos.  Please help.

    I added photos from my laptop onto my iphone 4s,now I can't delete them. There is no trash can for these photos,but there is for others. What have I done?

    Sounds like you used iTunes to sync them to your phone. You will need to use iTunes to unsync them - they can't be deleted on the phone.
    ~Lyssa

  • How can I manually verify autodiscovery configuration for on premise environment from Lync 2013 desktop client?

    I have very limited access to an environment (basically just user access). I am documenting the Lync 2013 cilent for this environment. I was provisioned a limited SIP enabled account for testing. Autodiscovery from the Lync 2010 client works, but not from
    the 2013 client. I can connect (with some issues) from either 2010 client (autodiscovery) and 2013 client (manually configuring the server). So I want to verify if the Autodiscover is configured correctly to work with the 2013 client or not and if the reason
    it fails for me is due to something wrong with my account or if this will happen with other users?
    I have checked the lyncdiscoverinternal.domain.com and it resolves and is reachable. I can navigate to https :// lyncdiscoverinternal.domain.com/Autodiscover/AutodiscoverService.svc/root/domain and it returns the information I would think it should
    including hrefs to Internal/Autodiscover, Internal/AuthBroker, External/Autodiscover, External/AuthBroker, Internal/Mcx & External/Mcx as well as fqdns for SipClientExternalAccess, SipClientInternalAccess, SipServerExternalAccess & SipServerInternalAccess.
    The AuthBrokers urls return what I believe is the expected RemoteService Service pages. The Mcx urls return what I believe is the expected McxService2 Service pages. The SipClientInternalAccess & SipServerInternalAccess fqdns are both resolvable and
    reachable. The Autodiscover urls return hrefs for Domain and User. Those Domain urls return the same information as the initial root/domain url and the user url (which I believe is the one that is actually opened by lync during the autodiscover process) returns
    what I believe is an expected 401 - Unauthorized: Access is denied due to invalid credentials page.
    If I explicitly configure the Lync 2013 client to use the fqdn listed for SipClientInternalAccess, the client will log me in. However on Automatic configuration, it fails to log me in.
    One other note is that when I watch with Wireshark, I observed that it is getting another internal server fqdn from somewhere. We'll just say that the SipClientInternalAccess fqdn is lyncABC.domain.internal. When looking at Wireshark and the DNS requests,
    I'm also seeing a lync2013ABC.domain.internal that does resolve and is reachable and can also be used as the explicitly listed server in the Lync 2013 client and it will log in. However, that fqdn is not listed in any of the root or domain url replies. So
    I'm not sure where it is coming from or how to check that.
    Is there any additional information anywhere that can tell me exactly what the behavior of the 2013 client is when trying to find the server to authenticate to and how I can reproduce any missing steps manually to determine what it is identifying as the
    login server (if any) since it is obviously not the trying the one listed as SipClientInternalAccess?
    Thanks,
    Richard

    Hi Richard,
    To narrow down the issue, you could refer to the following steps first.
    1. Delete the Lync client 2013 user profile and registry key.
    User profile:
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    Registry Key:
    HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
    Certificate:
    a. Open Windows Certificate Manager. To do this, press Windows + R, type certmgr.msc, and then click OK.
    b. Expand Personal, and then expand Certificates.
    c. Look for a certificate that's issued by Communications Server and delete it.
    2. Upgrade Lync client to the latest update.
    3. Check the DNS records(A records and SRV records) again.
    Best regards,
    Eric

  • Can Central System administration be configured for JAVA systems?

    I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
    Can some one tell me, can it be configured for JAVA systems like Portal?
    Thanks
    Aditya

    Hello Aditya
    Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

Maybe you are looking for