Can the included instruments with LPX be installed on a secondary drive?

Hi Guys,
I've just taken the plunge and purchased Logic Pro X - upon first opening, it shows a message that "Logic Pro X is currently downloading an essential collection of instruements... (etc)"
I'm wondering if, once these are downloaded, it is possible to choose the location for the samples?
I have a dedicated SSD drive for my audio samples from other companies (Native Instruments, Toontrack, etc) and would ideally like the included Logic samples to be kept there too, especially the new drum samples.
If anyone who has just installed LPX has noticed (or used) the option to install the samples this way, I would love to hear from you!
Cheers and thanks!
Mike

Thanks!
I'm going to have a shot at this when I get home - there was no option in the installation process unfortunately.
Cheers,
Mike

Similar Messages

Can the iMac G3 with Panther boot from an external FireWire drive?

It does have firewire. I am worried that if my internal HD fails, I am going to be SOL. Sooo... If I install just Panther (full retail) on a new internal HD, will i be able to boot from it? How about if it is on an external FW drive? I DO NOT have the original install disks that came with the computer.

If I install just Panther (full retail) on a new internal HD, will i be able to boot from it?
Yes. Verify that the computer's firmware is up to date first.
How about if it is on an external FW drive?
Yes.
(29546)

Can anyone help me with how to install itunes on windows 8. The apple techs suggestions did not work

Can anyone help me with how to install itunes on windows 8. The apple techs suggestions didn't work. Spent most of today installing and uninstalling itunes according to their instructions. They will charge me again if I call again.

When I run the iTunes64setup.exe it says: "The thingy is not a valid win32 application."
That generally indicates that the installer has been getting damaged on the download.
What web browser have you been using for downloading the iTunes64Setup.exe? Does it make any difference if you use Firefox instead of IE for the download (or vice versa)?

Can the fields grow with the section expanding?

Post Author: KennyG
CA Forum: General
Can the fields grow with the section expanding?There are several fields in one section of my report, all the fields are formatted with "Can Grow" checked and bottom border showed. In design mode, all the bottom borders stick to the bottom of the section. However, when print, the section may expand as some fields grow, but the rest fields can not expand automaticly with the section, so the bottom borders will not be at the same height as before. How can I deal with it? Is there any option about this?
Any suggestion would be greatly appreciated

Post Author: MikeA-ICE
CA Forum: General
One thought I have is to insert another section just below the one where the growing fields are and put a single line or individual lines under those fields. Move it up to the top of that new section and move the break between the existing section and the newly added one tight up against the bottom of the 'can grow' fields.
Another possiblity lies in the fact that the "Can Grow" option has a formula attached to it. I don't know if it will work or not but maybe an If/Then formula could tell field B to grow if field A grows. I've never tried that but it may be possible. I'd think the first suggestion would be the one to try first.
Mike

I have 2 iMac's. I installed snow leopard on one. Can the snow leopard I purchased be installed on the 2nd computer

I have 2 iMac's. I installed snow leopard on one. Can the snow leopard I purchased be installed on the 2nd computer?

If you bought the family pack.
The single version is licensed to use on one machine.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

What is the easiest and best way to install or open flash drive in Sarfari on my Macbook Pro...2010 model using mountain lion

what is the easiest and best way to install or open flash drive in Sarfari on my 2010 macbook pro using mountain lion?

There is no really good way to do what you want. Any tracks you purchase via your own iTunes Store account are for your personal use, tied to your iTunes Store account, and can't be given to anyone else. If you don't want to gift the tracks to her and can't access her iTunes Store account, the only option other than creating her a completely new iTunes Store account (which will require a new email address for her) is to buy the CDs those tracks are on.
Regards.

Can anyone help me with lightroom 5 - download photos from hard drive and develop on a MAC

Can anyone help me with lightroom 5 - download photos from hard drive and develop on a MAC@
I have not used this forum before and trying to find my way to assistance with developing photos in Lightroom 5 on a Mac. Have imported the photos from the folder, but cannot open them in the develop module, as the develop module does not show! Newsgroup_User

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Can the iPod (5th Gen) be used as an external hard drive? (w/ no syncing)

Dear Forum:
Can the Ipod (5th Gen) be used as an external hard drive where I can manually (without syncing) transfer photos to the drive? My goal is to be able to transfer images from my MacBook (OS 10.4.11) to the Ipod and then erase some of the pics on my MacBook to save space; this will be something I'd doing when I'm traveling--I don't want to be carrying my desktop external hard drive with me.
Naturally I don't want to sync the photos onto the Ipod because I'll be erasing photos to save space. By the way, I use Aperture 2 (with latest firmware) if it helps to know.
Ideally, is there a way I can "see" the Ipod as an external hard drive, so I can move files onto it?
Thanks,
Steve

Click here and follow the instructions.
(50129)

Can't boot computer with 10.5 install CD or Single User Mode, or Safe Mode.

Ive written a couple times about this and responded to people who have similiar queeries but i just havent gotten any answers.
I cannot log onto my computer, I boot up and get a blue screen, with a nice black arrow. Thats as far as i can get. Obviously happening to lots of people..So, ive tried rebooting holding the C key and with 10.5 install CD, ive tried Unix (command-S), Ive tried resetting PR Ram, ive tried mantra recitation and cooing to my laptop; ive tried all the shortcuts in Oreilly's book and the only thing that DOES work is holding the OPTION key while rebooting. This brings up a nice icon of a padlock and a place to type letters or words and then there is another arrow in a box. Is this Open Firmware? I dont have an open firmware password...Ive tried entering my user password but it doenst accept it. ( I did change my password last week, did that create these problems???) how do i by pass that password????? Is it open firmware? (the date reads 1904 when i do the command option-O F command, and i cant get beyond that either...HELP!!

Hello,
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Utilities from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access the Menubar at top.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
Space between mount & -uw, space between -uw & the /
rm /var/db/.applesetupdone
Space after rm, before the 1st /

Error msg "FCO-00011 The step createJSF with step key " install SM7

Hi all
The following error msg as when I installing SM7
the error show "The step createJSF with step key " <== what meanings?
Regards
Kevin
WARNING[E] 2009-06-10 21:58:40.890
CJS-30197 User SAPJSF already exists
Diagnosis
You have tried to create or change a user that already exists.
Procedure
Edit the existing user or first delete the user and then recreate it.
Alternatively, you can choose another user name, for example, by
appending part of the first name.
[System: PAS(001), Message: 01 224]
. DIAGNOSIS: For more details see output of log file: User SAPJSF already exists
Diagnosis
You have tried to create or change a user that already exists.
Procedure
Edit the existing user or first delete the user and then recreate it.
Alternatively, you can choose another user name, for example, by
appending part of the first name.
[System: PAS(001), Message: 01 224]
*ERROR 2009-06-10 21:58:41.218*
*FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .*
Edited by: Kevin Wong on Jun 11, 2009 3:47 AM

Hi
anyone can help me or having the same problems?
*ERROR 2009-06-10 21:58:41.218*
*FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .*
Regard,

Can the 5010 peer with 5548 for vpc ?

We are in the process of replacing a pair of 5010's with 5548s. The 5010 is fully loaded including FC expansion module. We have limited rack space avail which prevents us from setting up the new pair of 5548s to support vpc and then moving cables from old to new. As an alternative i was wondering if it is possible to shutdown the B path, replace the 5010-B with 5548-B, and get vpc up and running between the 5010-A and 5548-B then replace 5010-A with 5548-A.
We are currently using the following
- vpc portchannel to core switching (6500)
- vpc portchannel to edge switching (4948s)
- vpc portchannel to UCS Fabric Interconnects
- vpc portchannel to Netapp Filer (NFS/FCoE)
- port channel to single homed 2ks
- FCOE to Servers and Netapp
- FC portchannel to core MDS switches.
I am not as worried about the FC side of the house as I am the vpc side. Specific concern (based on some lab work a while back) is with QoS policies and consistancy checks, but as you can see from the list there is a lot to consider.
I am interested any insight or feedback on this approach.
Thanks in advance
DaveO

A Nexus 50x0 cannot be a vPC peer for Nexus 55xx due to different ways of VPC implementation between the two.

Can the ifi work with an iMac?

Can the Klipsch ifi work for an iMac?
Hi, I'm buying an iMac and I want great speakers to use with them. I'm very interested in purchasing the klipsch ifi for it, but I'm not sure if they only work with an iPod or with computers as well. Help please?

When I walk through the local CompUSA, there the ifi is, in the Apple section--all hooked up. I think that is what the i in the name represents, like iPod, iMac, etc.
Joe

Raid ... Exactly what can the RAID do with the TD230

Hi,
Have a bunch of TD23013U's and the newer TD23019U's. They both come with RAID, Intel onboard and a LSI9240-8i.
Q: Out of the box, can the onboard Intel RAID do RAID 5 or is a separate key required for it (part no please and FRU number?).....I take it it can do RAID 0,1 out of the box. Is the key not supposed to come with the unit?
The LSI RAID card, can it do 0, 1, 5 without any additional key purchase? If it cannot do a raid 5, is it not supposed to part and parcel of a shipped unit?
Thnx
Solved!
Go to Solution.

Hello Hitesh,
The TD230 has the following RAID Setup...
- SATA RAID 0, 1, 10 (Chipset)
- SATA RAID 5 Key Needed (Chipset Optional)
- SATA / SAS 0, 1, 10, 5 (HW)

Can the Ipad2 work with any cellular network?..Celtel Tanzania?

The Ipad2+wiFi+3g from the Apple store are configured for AT&T or Verizon...If I buy this on line for the store, can I then reconfigure for any celluar network or does that men its locked and tied to these networks only?...I need to use it in the US, UK, Europe, Tanzania and Kenya.

The iPad 2 is not locked to any carrier. In the US, you can buy an iPad with an AT&T sim card, or a Verizon model without a sim card. The AT&T model can be used with any GSM carrier's 3G micro sim. The Verizon can only be used on a CDMA network.

Can the iPhone 4 with iOS5, have more than one custom voicemail greeting?

Is it possible to put more than one custom greeting on the iPhone 4 with iOS 5? I sometimes would like certain people to know where I am or what I'm doing so they may take the opportunity to join me without me answering the phone each time it rings when I'm hosting a seminar or teaching a class. I would like to record a couple of responses that I could pick from, but don't know if that is possible. Thanks!

iPhone and carriers do not natively support this. You have to use a third party application from the App Store to take advantage of this feature, which is possible via an application such as YouMail. It's free in the app store. I'm sure there are others like that available as well.

Can the included instruments with LPX be installed on a secondary drive?

Similar Messages

Maybe you are looking for