Can the Iphone 4S play audio via the USB cable
I have a 2012 Subaru Forest that has Bluetooth, 3.5mm Aux plug and USB input. I cant get the music to play via USB input. What am I doing wrong.
John
I have a similar set up in a BMW
However it has a factory ( extra) "Y" cable that plugs into 3.5mm and USB sockets with 30
pin on other end and is then recognised as USB input on Head unit
No idea about Subaru
However you probably need to talk to your Dealer about the built in Sound system
and understand how to use iPhone/iPod input
Similar Messages
-
When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?
Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks? -
Can i watch videos from my iphone on my TV with the USB cable?
Hello. My TV has a USB port but i can't seem to get my iphone videos through my tv by linking it via the USB cable. Does anybody know a way to do this?
You cannot connect an iPod to your TV via USB. You need one of these two cables:
Apple Component AV Cable
Apple Composite AV Cable
depending on this inputs available on your TV.
Message was edited by: Dave Sawyer -
OK, the videoformat may be changed (PAL, NTSC) by plugin a specified cable to be connected the iPhone to the TV, but how can I force to have PAL-format instead of NTSC to be send to iMovie via the USB-cable? Al this transcoding afterwards takes a lot to much time. Is there a solution before sending the clips?
Well, thanks a lot. iMovie '11 is similar, but not identical and unfortunately I don't seem to find any "Frame Rate Pop-Up menu" when I generate a new Project. Do not find an "Aspect Ratio Pop-Up" either. Also the help does not speak of this options. I just have to choose a Theme and that's it. Also the "Settings" Menu for the Film does not help.
I also checked the general settings for iMovie:
So I would dare say, there is actually no possibility anymore, to set the output format. And also when I create the output file, there is nothing more than a short list of resolutions.
I do not understand why all options were taken away. I admit, I am a little disappointed.
Best regards
Claudio -
I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
If not why option available
Thanks!What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
Best of luck. -
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
I just got an HP Stream 8 tablet with Windows on it. I have a Mac desktop running 10.6.8. I set up Home Sharing by making sure both had the same version of iTunes and I authorized the new tablet (desktop already was). (I haven't exceeded the number of authorized computers.) I would like to take some of the playlists I have on my desktop Mac and copy them into iTunes on the tablet. I hooked up the tablet to my desktop with a USB cable but wasn't able to get it to copy. I do not have WIFI....is there a way to do this by just having the tablet hooked up via the USB cable? If so, can someone please talk me through the steps necessary to do that? Thanks!
Did you erase the machine and set it up with your accounts or is the previous user still on it?
Please note that Mountain Lion is far from being an app, it is your Macs operating system.
You might benefit from reading this: www.apple.com/support/switch101/ -
My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?
I was able to connect the first time, but after that my computer simply rejects the Iphone and nothing happens. The Iphone doesn't spin or try to reboot even! .
WHAT to do? I got it today.When you say it ignores your iPhone, do you mean it does not appear in iTunes if you launch iTunes? Or it does not appear in Finder? Or does not appear in iPhoto? Or you get an error message?
-
Any ideas?
Thank you for reaching out to us, jmush. There are so many options to listen to music from cars nowadays. It's awesome and really convenient. Unfortunately, some features may not work correctly due to software both from devices and headunits. While, bluetooth can display your phone name and contacts, it may not display song ID3 tags, etc.
With regards to plugging it in via the USB cable, you can try setting your phone to storage mode, and the headunit may be able to read stored music found in your phone, but it may not be compatible. http://www.verizonwireless.com/support/knowledge-base-113331/
Keep us posted!
NicandroN_VZW
Follow us on twitter @VZWSupport -
I cant connect my iphone 4s on my laptop, I changed the usb cable and is not charging too. What i can do?
D13, thanks for these details. This an awesome clue. Are you able to connect to this Wi-Fi connection with other devices? Let's try a few steps to resolve this issue.
First, reset the network in Settings>General>Reset>Reset Network and power your device off/on.
Secondly, delete the Wi-Fi connection in Settings>Select your Wi-Fi>Forget this Network and the try to connect to that Wi-Fi again.
Lastly, try creating your Wi-Fi connection. Tap Settings>Enable Wi-Fi ON. From Choose a Network, select Other. Enter the Wi-Fi network name. Select Security. Select the Wi-Fi network type then select Other Network. Enter the Wi-Fi network password then select Join
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.
You do have iTunes installed right?
See:
iOS: Device not recognized in iTunes for Windows -
I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????
Connect your iPhone to iTunes and restore or follow the prompts.
-
I have a Lexmark printer which is a little old. So when i connect my iphone to it via the USB cable my printer doesn't recognise it. If i bought a bluetooth adaptor for the printer would i be able to print photos via bluetooth?
The only way to print from an iPad is to have a printer that supports AirPrint. Here's a link to an Apple support page on AirPrint.
http://support.apple.com/kb/ht4356
AirPrint is way to print wirelessly via Wi-Fi but it requires that the printer supports AirPrint. The iPad cannot use Bluetooth to print and it will not print when connected via USB. -
Can I use the USB cable of my ipod nano with my iPhone 3G?
Hi,
I am a new user of Apple. I have a ipod nano and a iPhone 3G. I wonder if I can use the USB cable for the ipod nano with my iPhone 3G. Just want to make sure if it is 100% compatible. Thank you very much.Thank you very much!
-
what can i do when my iphone 4 doesnt respond to anything and all it shows is the usb cable under the blue itunes icon?
try using iTunes
Maybe you are looking for
-
Change user password , when DB is in mount state
Hello, 1. How to check user status , when database is in MOUNT stage. ? (Locked/Expired) 2. Is it possible to change the password of the user SYSTEM , while database is in mount state.? If DB is open , we can query DBA_USERS table and can get the det
-
Problems facing while installing portuguese in java srm 7.0 unicode
Hello , I am trying ot install portuguese in srm 7.0 unicode system. I have updated the config tool parameters as below. Set ume.logon.locale to true Set ume.admin.wd.locales = pt ( for portuguese) But even aftyer the restart I am not able to see the
-
My Server 2012 getting huge internet speed upload and download.
Respect to all dears. thank you in advance. I am using 2012 Windows server HP PROLIANT DL380P GEN8 E5-2650 PROCESSOR P420I/1GB FBWC 4X1GB FLEX 4X8GB MEMORY 3X600GB SFF SAS HDD DVD-RW 1X460W And I got public IP with 6 MBPS Dedicated Wireless line. but
-
Custom content in download as Powerpoint
In one of our reports, we have a reference to a custom JSP, which displays a chart; we had to go this route to allow advanced charting features. This JSP is hosted in the built in OC4J web site. But when we enable download option, the custom content
-
Hello- Every time I close and reopen Photoshop (CS4) it seems to revert to using sRGB as Working Space, and Preserve Embedded Profiles for all three types of color file. I have to go into Color Setttings and change these settings to what I want. I kn