Can the iphone maps display more than one pin at the same time?

For example, on a recent trip to New York I preloaded bookmarks of all the places I wanted to visit into the iPhone Maps. I then wanted to see where they all were in relation to one another so I could decide which one to go to next (MOMA, Guggenheim, Metroplitan Museum of Art for example). Is it possible to have the map display them all at the same time?

DaVBMan wrote:
Are you sure about that Andrew. I see no option to toggle on all my bookmarked pins. I can pick one to show and it shows up. But if I pick another, the previous one will go away. Only doing a search for stuff in an area will Google Maps show multiple pins, but I see no way of making all your saved bookmarks show up.
Did it on mine just now but I also did a very small location here in Sacramento. Dropped a pin in 1 city, Bookmarked, Dropped a few others and bookmarked at least 6 cities in the general Sacramento area, zoomed out just a bit and saw 6 red Pins. Which are all bookmarked.
If I could snap a photo of my screen I would post it.

Similar Messages

How to assign a iview to more than one page at a same time

Hi Experts,
I have created 40 pages. I have to assign ivews to these pages. One of the iviews is common to all the pages. Going to each page and assigning the iview to that page will take alot of time. Is there a way in which i can add an iview to more than one page at the same time?
Thanks in advance,
Prisford Pereira.

Hi
You can do that using XML Content and Actions.
You can write XML in specified format and upload it to portal, that will automatically create the content for you in PCD. You can create iviews, pages, assign iviews to pages etc.
More details are available at the how to guide.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207a2141-c870-2910-e080-90c920b24f47|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207a2141-c870-2910-e080-90c920b24f47]
Hope this helps.
Best regards,
Ritesh Chopra

Changing a length of more than one audio file in same time

Hi! I'm searching a way to change a length of the several audio files at the same time (this applies to ads that will be broadcast at the radio. The sounds need to have same time accurate to milliseconds). Let's say I've got 20 audio ads, which were originally meant to have 30 seconds, but each of audio file has small differences reaching less than a second. I would like to do a one-off activity, that will change length of each file to equal 30.000 seconds. In a word, is there a way to stretch several audio files, which have different time, to the same length at a same time ?

Thank you for your reply, problem solved with the help of Adobe CC, but it turned out that one of open-source applications also can do it.

Syncing iphone on more than one computer (not at same time!)

I am travelling and had to replace my iphone.
The laptop I am travelling with has the same itunes account (and thus library) as my main computer at home.
Instead of manually downloading the purchased music I have in the icloud (which is not the complete library), am I able to sync my iphone to my laptop now, and then later resync it to my main computer when I return home?

copracer288 wrote:
Sorry if this is a noob question.
I have iTunes on my desktop. I want to install iTunes on my laptop.
If I install it on my laptop and then plug in the iPhone will the phone sync everything in it to my laptop?
No. The iPhone doesn't "sync" back iTunes library content (music, videos, podcasts) to your computer.
Can I than use either the desktop or the laptop for syncing?
You can, however, keep in mind that the iPhone only syncs with ONE iTunes library at a time. So if you have music from your laptop on your iPhone, when you sync with your desktop, those songs will be erased and replaced with what's on your desktop.
If you plan to do a lot of syncing between the 2 computers, you should copy your iTunes library from your desktop to your laptop so that the libraries are the same.
Thanks.

Why can't iphones sync to more than one library?

I just got an iPhone and a Mac. I still have my old computer and its iTunes, but my new computer has new music that I would like to add. is there anyway that i would be able to sync to both these computers?

clarisabigsur wrote:
I just got an iPhone and a Mac. I still have my old computer and its iTunes, but my new computer has new music that I would like to add. is there anyway that i would be able to sync to both these computers?
No.
Put all of your music on one computer and sync to that one.

Displaying more than one column in TreeControl

Hi,
I have three tables ( LaborOperation, LaborIndex, LaborData). In TreeControl, i am displaying the following table columns,
LaborOperation ->operationid,
LaborIndex -> indexid,
LaborData -> date, value.
i want to be like this.
+ Operation Id(Single Column)
+ OperationIndex(Single Column)
-OperationData(Multiple Column)
I can able to display single column values in tree control by setting the nodedifinition property in tree control. i can't able to display more than one column in tree control.
any idea about this problem
thanks in advance.
-Nainar

Arun Prasath wrote:
I want to display more than one row in a multiple columns of a single row.
For example,
In oracle apps, there are multiple tax lines for a single invoice. Each tax lines having their own entry in tax detail table.
When i try to display a single invoice's details in a single row i found the difficulty.Hmm did you see the title of the forum? Oracle Database » General Questions !
May be you want to check the Oracle Apps forum?
Aman....

Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

You can only connect to one device at a time using Bluetooth, See article below for more information.
http://support.apple.com/kb/ht1664
While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

Can I watch ATV on more than one tv in the house?

Can I watch ATV on more than one tv in the house?

Welcome to the  Discussion Forums
Can I watch ATV on more than one tv in the house?
Not without additional hardware.
Simply sharing the output from a single Apple tv would require you to split and amplify the signal, but bear in mind that long cables may well cause problems when it comes to watching video from any source.
You could also consider a multiplexer which would take inputs from a number of devices (Apple tv. DVD player etc etc) an distribute them to a number of tv's/display units.

Can One GL be mapped to more than one House Banks

Dear SAP Gurus
I have a query
Can one GL be mapped to more than one House bank.
as a business requirement, we need to map 2 different bank accounts to same GL and both will have different Cheque series for Automatic payment program .

Hi,
You meant to say in maintain same GLs iin Account IDs under single House Bank? GLs are assigned to each account IDs under a House Bank not directly with a House Bank.
Anyway, it is possible to map single GL to multiple Bank Accounts of House Bank, but as a standard function it is advisable to map each GL to different Bank A/c so that automatic reconcilation wont create any problem while selecting open items.
Regards
Prasad AV

ITunes 8.1 Can't Seem to do More Than One Thing at a Time

I upgraded to 8.1 and now, rather than a "faster" iTunes experience as was advertised on Apple's website, iTunes can't seem to do more than one thing at a time without locking up the application completely. For instance, when trying to download podcasts if I choose to hit more than one "Get" button at a time iTunes will freeze up until the first podcast has completely downloaded. During this time I cannot access any other screen in iTunes at all.
This freezing of iTunes also occurred while I was trying to sync my iPhone 3G. I received the Calendar sync error that a few other people have mentioned on the forum and wanted to turn off Calendar sync (since I don't use it and don't understand why iTunes turned it on by default, apparently, after the upgrade) but I had to wait for my iPhone 3G to completely sync before I could gain access to any of the tabs in the iPhone sync window.
So, basically it seems like the new version of iTunes (8.1) really doesn't like to be bothered while it is trying to copy data from one place to another.
Any ideas?

I'm using Vista Ultimate 64-bit and iTunes 8.1 installed OK, but required a restart of the entire OS after upgrading. It takes forever to launch, clicking on certain items (like applications) causes itunes to freeze for about 15-30 seconds before it continues (this is actually something that's been there since the introduction of the app store), I've had to switch my library view to LIST and avoid any sort of album art. Using album art to view my library causes iTunes to be extremely, obnoxiously unresponsive.
The best part - plugging in my iPhone to sync it... iTunes simply sits there dumbly - doesn't even recognize that I've plugged my iPhone in. So now I can't even sync. QUALITY product, quality. So the app I'm FORCED to use to manage my phone doesn't even work after upgrading. Outstanding.
I'm terrified of uninstalling and reinstalling... the last time I did that with iTunes it jacked my library up... it "lost" all of my music... basically it disassociated all of the music (even the stuff purchased through the itunes store) with the index file so I had to re-import EVERY song and delete the duplicate entry.
I searched a ton of forums looking for any clues as to how I could improve performance... All I run into is apple fan boys flaming any and all forums to the point of PC *****, no Apple *****, and so forth. Extremely unhelpful.
The fact is this - if I wasn't forced to use iTunes to manage my non-jailbroken iPhone 3G, then I'd dump it completely. It is a horrible app. Why punish the customers that haven't gone the route of "jail breaking" their iPhones?
One individual on one of the forums suggested that blue screens, and all the other random errors, including slow performance were due to a lack of RAM. I have 4GB of RAM on my machine I can run a virtual Fedora core 9 machine and a virtual WinXP machine on my Vista x64 box and still not have any performance issues with those two virtuals in the background sucking up system resources, yet with nothing open and less than 50% of my 4GB of RAM in use iTunes performance is abysmal. I have not run into any other application on my Vista machine that performs as badly as iTunes.
And Apple is touting a "64-bit" version of iTunes - it isn't. The applications the 64-bit installer installs are all 32-bit.
So, I'm searching as the two of you are for an answer to horrible performance of iTunes.
Even exiting out of iTunes takes a day and a half... "saving itunes library".... And my "library" isn't that big.

How do I display more than one region as a modal popup?

Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
     modal: true,
     autoOpen: false,
     width: 650,
     height: 450,
     buttons:{ Calculate: function(){calculateTotal();},
                     Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
    {$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.

Magali wrote:
Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
{$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.First build your dialog for new ID (please replace NEWREGIONID with your region static id)
$( function(){
$('#NEWREGIONID').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
And now you could open or close the dialog
$('#NEWREGIONID').dialog('open');

Displaying more than one display attribute in a tree component problem

Hi,
I have a parent table and child table, I want to display a parent table's display attribute and below that i want to display child tables two display attributes (while defining the rule for a tree compoment).
What i'm getting is :
I can able to display more than one "display attributes" for my parent table, but when i'm trying to implement that for my child table under my parent table. I am only geting the blank folder structure without names.
For example:
Parent table: Deparetment(id, name)
child table: Employee(id, firstName, lastName)
What i want is:
In a Tree:-
(Department name): software below that i want display both (firstName and LastName) stephen Fleming
for that employee.

Hi,
do you use ADF ? If yes, have a look at "master table with inline detail" option when dragging the master View
Frank

Can u watch films on more than one tv

Can u use apple tv on more than one tv in the home. Or just the one that is wired.

Welcome to the  Discussion Forums
Can I watch ATV on more than one tv in the house?
Not without additional hardware.
Simply sharing the output from a single Apple tv would require you to split and amplify the signal, but bear in mind that long cables may well cause problems when it comes to watching video from any source.
You could also consider a multiplexer which would take inputs from a number of devices (Apple tv. DVD player etc etc) an distribute them to a number of tv's/display units.

Can you sign in with more than one apple id on an iPad?

Can you sign in with more than one apple id on an iPad?

Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

Can I use more than one bluetooth device at a time with my iphone4

Can I use more than one bluetooth device at a time with my iphone4

Anthony
I have a Plantronics 975 earpiece that works very well with my Razr. I
just got a Panasonic KX-TG7873S phone system for my home, it has a
"Link-to-Cell" cellular convergence solution, from what I understand it is
just Bluetooth enabled. I have paired both device with my Razr. In
settings, Bluetooth setting, both device show. But only one device can
connect at a time. If my Plantronics is connected and I choose the
Panasonic device, the Plantronics device disconnects and the Panasonic
device then says it is connected. Both devices work when they
are connected. Is it because they are both "headsets"?
So, to have to remember to connect to one or the other device, depending on
weather I am coming or going is not practical.
On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

Can the iphone maps display more than one pin at the same time?

Similar Messages

Maybe you are looking for