Can the language for spellcheck be detected automatically?

In my day-to-day work I use 2 languages: English and Russian. But the spellcheck is not detected automatically when I type in Latin or in Cyrillic.
Actually, it works 2 ways: if I have the current spellcheck language set to Russian, then when I type in English - every single word is underlined. This at least shows that I have the wrong language set for spellcheck...
But if the spellcheck language is set to English and I type in Russian - nothing is underlined. A bit tricky if I forget to change the spellcheck language - I get the impression that I write everything correctly :)
I've searched all over Firefox but cannot find the option for spellcheck language to be detected automatically, like in Word, for instance...
Can this be fixed anyhow?
Thanks a lot in advance!

After upgrading to version 8.0 and then to 8.0.1 spell check stopped working. I use English and Russian languages and while downloading I chose first time Russian version of Firefox - in that case English couldn't be spelled and then I have downloaded English version - so now Russian cannot be spelled. Everything is "on" in the Options->Tools->and etc., and I have added Switcher manager and added Russian Dictionary...doesn't mater. While typing in Russian - no any other dictionary available except for English. Is that a problem for new version of Firefox and can that be fixed?

Similar Messages

Can I set the language (for spellcheck) of a document in the iCloud Web version, or iOS version, of Pages? If yes, how?

Can I set the language (for spellcheck) of a document in the iCloud Web version, or iOS (iPad) version, of Pages? If yes, how?

In iOS, the spellcheck language follows the keyboard.
The forum for questions about iOS Pages is at
https://discussions.apple.com/community/app_store/iwork_for_ios

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

Go to the bottom of the page, click the flag, then select your country.

How can I change the language for the Quiz Results page?

How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

For Quiz Slides you've already added to your project file you will need to change the labels manually. If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

Can any one tell me where do we have to change the Language for Vendor curr

Hello
Can any one tell me where do we have to change the Language for Vendor currerncy?
Is it in the vendor master record or in the Currency settings.
Please tell me the path or Tcode for it.
Best Regards,
Sairam.

hi sai
do you want to change the currency or langauge ?

I cannot find how to change the language for labels in a quiz

I cannot find how to change the language for labels in a quiz

You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

Problems realted to changing the language for non-Unicode programs from one into anther.

Hi,
Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language
and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs
is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however,
when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is
Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into
English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal
for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while language used
for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language
Arabic to be shown properly, then then I
must let the language for non-Unicode programs be Arabic.
Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs
must be in my Arabic lanague English and whatever location and format are.
Is this happened with you as well?
I would highly appreciate any clarification from you.
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
I am confused about your issue.
when you changed language for non-Unicode programs into English, it show English.
while language for non-Unicode programs is Arabic, it show Arabic, If it's none-Unicode.
This is correct. Why you think it's an issue?
About your second scenario description, I was not clear what you said. Could you give us a explanation?
Note: System display language is not the un-Unicode program language.
You can just choose one language to display the system at same time.
This article might be helpful to you:
Install or change a display language
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
Change the system locale
http://windows.microsoft.com/en-in/windows/change-system-locale#1TC=windows-7
Karen Hu
TechNet Community Support

Problems realted to changing the language for non-Unicode programs

Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however, when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while langauge used for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language Arabic to be shown properly, then then I must let the language for non-Unicode programs be Arabic. Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs must be in my Arabic lanague English and whatever location and format are. Is this happened with you as well?
I would highly appreciate any clarification from you.
This question was solved.
View Solution.

Hi cooperator,
I saw your post regarding the language questions and I will be happy to help. What are you are experiencing with the languages is normal. The base operating system is in English and while you can change the display language the core kernal of the operating system would be in English.
The reason that the Intel Graphic and Media Control Panel is in English and the rest in Arabic is because the driver would have been designed in English and is hard coded as into the driver but the display language is set to Arabic. So when the language is set to English everything will be in English.
The reason you having issues extracting drivers when you English set at the language is because the HP website will determine where in the world you and when you download the driver it will be the appropriate language for the country you are from. So when it extracts it will look for the proper extraction path using Arabic but everything is English. It work no problem when you are on Arabic because the driver can read the path properly.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HT201210 Can the OS for an iPod Touch be updated beyond 3.1.3? iTunes tells me that this is the latest software but many apps won't run on this older os.

Can the OS for an iPod Touch be updated beyond 3.1.3? iTunes tells me that this is the latest software but many apps won't run on this older os.

If you have a 1G (first generation) iPod touch then it can only go to iOS 3.1.3. To identify yours:
Identifying iPod models
If you need a higher iOS, you will have to get a newer model iPod.

Why has the language for the texts on my iphone changed to French?

iphone has gone mad. The language for the texts has switched to french. The keyboard is the french layout, despite under settings>general>international>language being set to english and keyboard under ...settings>general>international>keyboard>english (UK)>being QWERTY.....which it isn't. It means the auto correct is a nightmare. Any help gratefully received.

To be honest these are the solutions that may or may not work.
First thing I would try is rebooting the phone by holding the sleep/wake button and home button for 15 seconds until you see the white apple logo.
If that doesn't work I would restore from backup. If that doesn't work I would restore as new. If all else fails take it to your closest apple store they may replace the phone for a working one..

Can the requirement for a passcode be turned off?

Can the requirement for a passcode be turned off for a new Ipod touch?

Yes, settings, passcode - passcode off. If you do that, the device is less secure, and you will have to re-enter your password for Find my iPhone, and find my friends each time you open the apps.

Can the app for autistic children be used on an android

can the app for autistic children be used on an android?

Android and iOS are two different operating systems. So one app won't work on the other unless the app makers make a version for each operating system.

Can the volume for downloaded music tracks be synced and how

can the volume for downloaded music tracks from itunes be synced and how if so

Hard to know what the cause is because it's like this
I know what I did to cause this. I upgraded my one of my hard drives, renamed the drive and moved the folder. The missing pictures it can't find were added with the option in the advance menu "copy photo to library" turned off.
and this
What I did is added a small SSD as my primary drive. Put the OS and all the apps on it. Moved my iPhoto and iTunes libraries to an large external. Most of the picture it is not having a problem wth. Only certain ones. Don't actually think I unchecked tha prefeence, but it's acting like i have.
seem to be written by two different people.
This thread
https://discussions.apple.com/thread/3216539?tstart=30
has details on how one user hacked the SQL database to fix the issue. Not for the faint hearted. Back up first.
Regards
TD

Can the origin for an object be always the centre of the stage?

Hello everybody!
I am doing a site where I've got an object bigger than the stage, that I can zoom and drag. My problem is that when I zoom the object, he uses an origin which is on the same object. What i need is that the origin of the object will be always the centre of the stage. The aim is to drag the object and zoom in right where I am, as happens for examle in a Cad.
So, can the origin for an object be always the centre of the stage?

Could you try this
sym.$('yourelement').css('background-origin','#Stage');
Not sure though.

Can the headphones for the iPhone 4s be used for the macbook pro 13inch as a mirophone?

Can the headphones for the iPhone 4s be used fof the MacBook Pro 13inch as a headphone/microphone?

Is this your headphone http://store.apple.com/us/product/MB770G/B ?
If is, you can use it in your Macbook

Can the language for spellcheck be detected automatically?

Similar Messages

Maybe you are looking for