Can the Late 2012 Mac Mini Server run on Lion, instead of Mountain Lion?

Since I plan to use this (USB 2) device http://plugable.com/products/UGA-2K-A
on a (yet to be ordered) Late 2012 Mac Mini Server, I am wondering:
could that box run on Lion, instead of Mountain Lion ? (the usb 2 device has some M.L. issues still)
I would not really need the server-part (only want the box because of the 2 disk drives), maybe that influences things.
Would there be any possibility to order it from Apple with Lion instead of Mountain Lion pre-installed ?
Could the latest hardware in the box not-function under Lion, thereby necessitating Mountain Lion ?
Thanks to all for thinking with me!
Best,
Arie

It's simple: you cannot use a version of OS X older than the version that the Mac shipped with. At the very least, this is because the hardware may not be supported.

Similar Messages

How do i wipe a late 2012 mac mini server for resale?

I am wanting to sell my late 2012 Mac Mini Server and i would like to wipe and reset it.

Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
2. Reset the PRAM and the SMC, which might contain personal information.
3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
4. If you activated FileVault in OS X 10.7 or later, turn it off.
5. If you use Boot Camp, the partition must be deleted.
6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

Is the HDMI standard for the late 2012 Mac mini w/4000, 1.0, 1.1, or 1.2?

Hi, I can't seem to easily find this info. What is the actual HDMI standard used on a very late 2012 MacMini 6,2 with i7 and 4000 graphics?
I understand it can support up to 1920x1200 ... What standard is that? ... And will an HDMI to Display Port cable supply that resolution? Thanks -Jeff

Maybe:
Does the new mac mini have Hdmi 1.4?: Apple Support Communities
I understand it can support up to 1920x1200 ... What standard is that? ... And will an HDMI to Display Port cable supply that resolution? Thanks -Jeff
Yes

Can the new Intel Mac Mini really run Win XP?

I have had my Mac Mini for almost two years now and i love it, i love it because i switched from Windows, but now i kind of miss Windows so i was going to buy a Windows PC but then i read somewhere that the new 1.66GHz Intel Core Duo Mac Mini can run Windows XP, so i have few questions if that is true...
1. How well will Win XP run on the new 1.66 GHz Mini with 1 Gig of RAM?
2. Which version of XP do i need to buy and where is the best place to buy it?
3. I know this might be a dumb question since Windows Vista is not out yet but do you think i will be able to use Vista as well?
Vista requires 512 of RAM for the basics and 1 Gig of RAM for max performance.
That's all i have for now, thanks in advance.
Any help and advice would be greatly appreciated!
Mac Mini 1.42 GHz G4 Mac OS X (10.3.9) It's small...?

1) If ou run it with Boot Camp (i.e. in a dual-boot environment, rather than through virtualization), it will run as well as on a PC with 1 GB of RAM, a 1.66 Ghz Core Duo processor and GMA 950 integrated graphics (quite well, but unsuitable for recent 3D games).
2) You need a standalone (non-OEM) version of Windows XP Home or Pro with SP2 included, any retail version of Windows XP should do. There are also workarounds that allow you to install other versions of Windows (like Windows XP Media Center).
3) The Mini should be able to run Vista (some people have already installed Beta versions of Vista on Intel Minis) but how well, I don't know.
BTW Boot Camp is actually Beta software, and its license ends in February 2007 (or earlier if Leopard is released before then).
If you need more information, you can also ask in the Boot Camp forum.

RAM Compatibility with the Late 2012 Mac Mini Core i7 Model (MD388LL/A)

Hi,
I ordered a Mac Mini for academic use and so far I have used this thing for 2 days but the problem is I usually have a lot of programs like SPSS, Excel, and Safari open at once to multitask and the 4 GB RAM isn't cutting it. I've had one instance where 3.9 GB of my RAM was put into use and I think a major culprit of the problem is that it runs on integrated graphics which takes RAM away.
So I ordered myself some G.Skill SO-dimm RAM from newegg (thinking it would be compatible with the Mac Mini since it was 204-pin, 1600 Mhz, non-buffered or ECC memory):
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820231580
Upon reading the reviews, I found that 2-3 people had issues with their Mac Minis freezing up with the RAM stick (g.skill claims to have no tested this RAM for Mac, but the one specifically for RAM was $20 more expensive), while others say it runs fine on their Macs.
Should this work? My hope is the people who froze up got bad sticks.

Maximum Memory
16 GB
Memory Slots
2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
Only use RAM meeting the above specs. Stay away from memory commonly used in PCs like GSkill. Buy your memory from OWC or DataMem, although many here also recommend using Crucial. I would not buy memory from NewEgg because almost all of their products are geared to the non-Mac market and tend to be troublesome in Macs.

What is the Late 2012 Mac mini logic board chipset?

Just curious to know what chipset the my Mac is using.
Extra details: its the 2.5 GHz dual core entry level model.

Is this not what you asked?

Display goes black (Late 2012 Mac Mini)

Late 2012 Mac Mini (2.6Ghz Core i7, 16GB, Fusion drive).
Was previously connected to an Apple LED Display (displayport). I shuffled things around so it's connected to an Apple Thunderbolt Display and HP Compaq LA2405wg via HDMI --> DVI with the included adapter.
Everything will work fine for a while, including NIC Teaming (LACP) with the internal gigabit & Display ethernet.
Occasionally -- and especially today -- the Display will just go black, like it went to sleep. I can still hear sound, and ethernet continues to work.
Rebooting, or power-cycling the Display brings it back to life.
I also noticed today that the Display will CONSITENTLY / repeatably go black after a very short time watching a video full-screen. Full-screen video on the 2nd monitor connected to the HDMI port doesn't have this issue.
Anybody else having this problem?

I purchased the Late 2012 Mac Mini on 11/21/12.
I received the Thunderbolt Display on 9/20/11.
It just blacked-out on me AGAIN, and this time neither power-cycling nor rebooting brought it back.
I plugged in my old LED Cinema Display (displayport) into the Mac Mini until I can get this sorted out.

Upgrade logic board in late 2012 Mac Mini?

Can I upgrade the logic board in the late 2012 Mac Mini? I have a dual core and I see 2.6 quads out there. Just wondering if it just works by swapping it out.
thanks!

thanks! I don't intend on buying for about a year and by then all the used Quad minis will be a year older; the replacement Logic boards will still be new. Unless I can find a quad core mini still in box.

Late 2012 Mac Mini Display Capabilities

Can the new 2012 Mac Mini drive both an Apple Thunderbolt Display and a LED Cinema Display via daisy chaining?

Welcome to the family. Search this forum for the main thread for this problem titled: "mac mini 2012 video blinking out".

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

Hi there,
The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
AJ

[SOS][Urgent]Can I install OS Lion 10.7.x on late 2012 mac mini?

Hi all,
I got a late 2012 mac mini device which comes with preinstalled Mt Lion(10.8.2).
I need to run dual boot it with Lion 10.7.x. How can I install OS Lion 10.7.x on this device on different partition?
I've tried many ways but have not managed to do it(Create Lion USB bootable use my friend Lion OS dmg file).
Please help me.
TriQuang

In general, Macs cannot boot an operating system older than the one they were shipped with installed. There are some exceptions with those computers that shipped at the time of transition to a new operating system and still had the firmware that permited the immediately previous operating system. Once the firmware has been updated they can no longer boot the previous operating system.
Depending on the exact manufacture/release date of your computer it may have been possible to boot both Lion and Mountain Lion, but your use of a USB and attempt to boot showed that was not possible.
There is a technique some users say works in this case...and that is to install software such as Parallels 8 on an external drive partition, then install Lion on that partition and run it in a virtual machine environment. This gets very complicated but can be done.
Another alternative you might want to consider is looking at the Apple on-line store, lower left side of that window, and see what refurbished equipement is available that runs Lion. Those computers have been completely gone over by Apple, new batteries for the portable models, new caes, any faults repaired, and come with new computer one-year warranties. They are indistinguishable from a new computer. And if there is one that meets your needs you would have your current machine running ML and another running Lion.

I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

A few places online may still offer the i7 2.3GHz quad-core Late 2012 MINI (Oct 2012 to Oct 2014)
that allows the user-upgrade of RAM to 16GB, and this one I've seen is a Server model and has
two 1-TB Hard Disk Drives. The B&H store in NY online has this listed, if in stock now, price &
shipping in continental US is good until tomorrow.
Your i5 dual-core is still desirable to many, & you may be able to resell it if not needed.
Good luck & happy computing!

What years apple cinema display can I connect to the new 2012 mac mini?

I have a 23" Apple Cinema Display that I purchased in 2007. I currently have it connected to m7 2009 Mac Mini. Can I use it with the new 2012 Mac Mini? I am running the latest OS on my 2009 Mac Mini. I want to upgrade my Mac Mini for more storage a nd the faster processor.

Yes. You can connect it to the Mac Mini's HDMI port with the HDMI to DVI adapter that comes with the new Mac Mini, or you can connect it to the Thunderbolt port with a Mini DisplayPort to DVI adapter.
<http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>

Can I use my late 2006 mac mini as an external drive for my late 2012 mac mini?

I have a (late 2006) Mac mini that I would like to use as an external drive for my (late 2012) Mac mini. Is this possible and can anyone suggest what cables would be needed. I am aware that the ports are very different i.e firewire and thunderbolt. Thanks in advance!

- You can boo the old Mac in Targe Disk Mode and connect the two via FireWire (FW) You will need a FW 400 to FW 800 cable or a FW 800 or FW 400 cable and appropriate adopters
How to use and troubleshoot FireWire target disk mode - Apple Support
- Use the old Mac normally and setup Disk Sharing and access the old Mac via the network. The old Mac's disk will show up under Devices on the new Mac. One you set up the old Mac yo do not need mouse or keyboard or monitor. You can also setup Screen sharing and actually use the old Mac from the new Mac.
- Remove the HD from the old Mac and place it in an external USB enclosure of dock and connect it to the new Mac

Late 2012 Mac Mini - Random spinning beachball then crash.

Hi,
I have a late 2012 Mac Mini bought last summer. Since the early days I would randomly get the spinning beach ball and there was no bringing it back. A re-boot would be required. I upgraded to Yosemite and the issue still occurs. I could literally being doing any everyday activity. Browsing the web. Scroll through a quicktime video and it just happens. Now it will crash and I get a grey screen with a folder and blinking question mark. Now I know what that means but then when I reboot the Mac Mini it starts up again. Hardware test finds no faults. I was going to try a clean install but just wanted to get some opinions if possible. Thanks in advance.
EtreCheck version: 2.0.11 (98)
Report generated 23 November 2014 18:44:43 GMT
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
DELL P2014H 1600 x 900 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:52:1
Disk Information: ℹ️
APPLE HDD ST500LM012 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (390.02 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Logitech USB Receiver
Apple Inc. Apple Keyboard
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] org.virtualbox.kext.VBoxDrv (4.1.6) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.1.6) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.1.6) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.1.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.7.0 - SDK 10.6) Support
[loaded] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[not loaded] com.leapfrog.codeless.kext (2) Support
[not loaded] com.leapfrog.driver.LfConnectDriver (1.10.5 - SDK 10.8) Support
Launch Agents: ℹ️
[invalid?] com.adobe.AAM.Updater-1.0.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.leapfrog.connect.authdaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.stclairsoft.AppTamerAgent.plist Support
User Launch Agents: ℹ️
[running] com.leapfrog.connect.monitor.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Canon IJ Network Scanner Selector2 ApplicationHidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
iPhotoPhotocast: Version: 6.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
EPPEX Plugin: Version: 4.1.0.0 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
Slick Savings
Searchme
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Logitech Control Center Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      19% mds
      5% WindowServer
      0% com.apple.WebKit.WebContent
      0% fontd
      0% AppleSpell
Top Processes by Memory: ℹ️
241 MB com.apple.WebKit.WebContent
107 MB mds_stores
73 MB Safari
64 MB Finder
56 MB WindowServer
Virtual Memory Information: ℹ️
704 MB Free RAM
1.78 GB Active RAM
1.10 GB Inactive RAM
717 MB Wired RAM
1.74 GB Page-ins
0 B Page-outs
This is also the begging of the crash report the system provide after reboot. If this helps.
*** Panic Report ***
panic(cpu 0 caller 0xffffff80221c4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 0), Frame : Return Address
0xffffff802962be50 : 0xffffff8021d3a811
0xffffff802962bed0 : 0xffffff80221c4594
0xffffff802962bf40 : 0xffffff80221c425c
0xffffff802962bf50 : 0xffffff802224dcb2
0xffffff802962bfb0 : 0xffffff8021e3ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14B25

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can the Late 2012 Mac Mini Server run on Lion, instead of Mountain Lion?

Similar Messages

Maybe you are looking for