Can the microphone jack input be configured for a stereo signal from a tape deck without overloading

Can the Microphone jack input on the HP Pavilion dv6 be configured to take in a stereo signal from a tape deck without overloading the microphone jack, i.e., so it acts as a Line In jack?. The jack is too sensitive to accept the typical signal from a tape deck or stereo tape out jack from an audio receiver, and the incoming sound is overloaded and distorted. Also, connecting from a stereo receiver headphone jack so the level can be controlled to the laptop microphone jack lowers the signal strength but contains a lot of background hum. Any way to configure the microphone jack to have it work as a line in jack?

There're two ways to connect it. One is through the digital output ( which is the same as the front line out on the Audigy and is a different jack on the Audigy 2 series ) or through the front line out.
In either case, you need a stereo mini-plug to phono x 2 connector adapter cable.
In the case of a digital connection, only one of the plugs will carry the signal. For analogue connections, simply plug the two phono outputs into the L/R phono inputs on yer receiver.

Similar Messages

Can the PCI-6602 card be configured for 3.3 volts?

I would like to be able to configure my pci-6602 card to output 3.3 volt signals either in software or with MAX. Can this be done?

The 6602 uses only 5V logic for it's driven outputs, but there is a Tri-State Enable feature which drives the output to high impedance instead of hi. This allows you to pull up the outputs to the required logic voltage.
The Tri-State Enable is found using the wired OR map in the DIO Port Config.vi

HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls. please help as I use it for conference calls

Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

Why can the microphone not be working when I speak normally and be working when I use the speakerphone?

why can the microphone not be working when I speak normally and be working when I use the speakerphone?
anyone has had the same problem? Thank you!!!

Apple confirmed, it is an iphone 4S feature, that is intended for our 'benefit'. It is being solved by each of us using headphones to over-ride the muting function.

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

Can the headphone Jack/Port be Repaired?! Audio Pumping out one 1 Side Only-Mahalo!

Can the Headphone Jack/Port Be Repaired?! Audio only Pumping out On 1 Side!= Mahalo

Can you get into an Apple Store to have someone take a look at it? If there is something wedged into the headphone jack, I don't know if there is much you can do about it.

Can the USB NI DAQs be used for process control,eg.closed loop? or is too fast

can the USB NI DAQs be used for process control,eg.closed loop? or is too fast.

Hi mho,
1.usb is very high speed that is correct.Better you can choose PCI DAQ.But thats upto you.
2. see this:-
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14136
3.If Matlab support TCP/IP, that could be an option.
see Another idea: http://digital.ni.com/public.nsf/allkb/244A37667BD7CBCE86257520007F937B
Another simplest way to do it (assuming you running Windows) is to use a Matlab script.
If both programs running on different systems:-
Most simple and slow - Create two VI's with shared variable on both machines, and use a matlab script to
share data. (this makes matlab some kind of "slave").
More advanced but still relatively slow (Create two VI's with shared variable, on the Matlab machine build the .NET
dll, and it can be used on Matlab too ( at least at 2010b version, earlier version support only COM).
Create TCP/IP connection between two comps.
There is "out of the box" NI products, that communicate with Simulink models.You please do a simple search on that...OK
I think this link is also helpful for you:-
Procedimiento para la interface entre LabView 2009 y Matlab 2009b.pdf 1128 KB
Anyway All the best.Try....do it.
Thanks as kudos only

Can the same Bank Key number be for different SWIFT codes?

Can the same Bank Key number be for different SWIFT codes?

hi
once u have cancelled the challan this number will not be avaiable for the posting.
when u repost a different number will be avaiable for the posting.
hope this is clear assign some points.
with regards
Krishna Singareddy

Can the iphone 5 support two headsets for listening to the same music on the phone?

Can the iphone 5 support two headsets for simultaneous listening to the same music on the phone?

and it will mute a wired headset when connected to bluetooth
using a wired splitter will also 1/2 the volume as well you are putting the headsets in parallel giving each only half of the current sendt from the minijack

When downloading a file, I select "Save File", but I'm unable to check the box label "Do this automatically for files like this from now on." The box is faded out. It's very tedious when you have to select "Save File" everytime

Click on the file to download
The "Open" Dialog Box pops up
Select "Save File"
Try to click on the box labeled ""Do this automatically for files like this from now on."
The box is disable

Hello melanie90, see : [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file#w_changing-download-actions Changing download actions]
thank you

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?
What situations are better to export to to .PNG or .JPG?
J

iPad apps are designed specifically for the iPad and will not run on the iPhone or iPod Touch. iPhone/iPod apps will run on the iPad, but will only take up an iPhone sized portion of the iPad screen (though you get a 2x button which effectively doubles each pixel in both directions so may appear pixelated). There are also 'universal' apps (which have a '+' symbol against them in the store) which have processing in them to recognise the device that they are on and will tailor the display accordingly (so will make use of the iPad's larger screen).

I keep losing the ability to use the microphone to input notes how can I turn the microphone back on

I keep losing the ability to use the microphone When creating or adding to existing NOTES App that came with my iPhone five how can I turn the microphone back on? It reactivated for a while after the new iOS 6.1 update but only for a couple days.

I'm very sad about that.
Will Apple provide the ability to protect our children from inappropriate behavior sometime soon?

How can I manually verify autodiscovery configuration for on premise environment from Lync 2013 desktop client?

I have very limited access to an environment (basically just user access). I am documenting the Lync 2013 cilent for this environment. I was provisioned a limited SIP enabled account for testing. Autodiscovery from the Lync 2010 client works, but not from
the 2013 client. I can connect (with some issues) from either 2010 client (autodiscovery) and 2013 client (manually configuring the server). So I want to verify if the Autodiscover is configured correctly to work with the 2013 client or not and if the reason
it fails for me is due to something wrong with my account or if this will happen with other users?
I have checked the lyncdiscoverinternal.domain.com and it resolves and is reachable. I can navigate to https :// lyncdiscoverinternal.domain.com/Autodiscover/AutodiscoverService.svc/root/domain and it returns the information I would think it should
including hrefs to Internal/Autodiscover, Internal/AuthBroker, External/Autodiscover, External/AuthBroker, Internal/Mcx & External/Mcx as well as fqdns for SipClientExternalAccess, SipClientInternalAccess, SipServerExternalAccess & SipServerInternalAccess.
The AuthBrokers urls return what I believe is the expected RemoteService Service pages. The Mcx urls return what I believe is the expected McxService2 Service pages. The SipClientInternalAccess & SipServerInternalAccess fqdns are both resolvable and
reachable. The Autodiscover urls return hrefs for Domain and User. Those Domain urls return the same information as the initial root/domain url and the user url (which I believe is the one that is actually opened by lync during the autodiscover process) returns
what I believe is an expected 401 - Unauthorized: Access is denied due to invalid credentials page.
If I explicitly configure the Lync 2013 client to use the fqdn listed for SipClientInternalAccess, the client will log me in. However on Automatic configuration, it fails to log me in.
One other note is that when I watch with Wireshark, I observed that it is getting another internal server fqdn from somewhere. We'll just say that the SipClientInternalAccess fqdn is lyncABC.domain.internal. When looking at Wireshark and the DNS requests,
I'm also seeing a lync2013ABC.domain.internal that does resolve and is reachable and can also be used as the explicitly listed server in the Lync 2013 client and it will log in. However, that fqdn is not listed in any of the root or domain url replies. So
I'm not sure where it is coming from or how to check that.
Is there any additional information anywhere that can tell me exactly what the behavior of the 2013 client is when trying to find the server to authenticate to and how I can reproduce any missing steps manually to determine what it is identifying as the
login server (if any) since it is obviously not the trying the one listed as SipClientInternalAccess?
Thanks,
Richard

Hi Richard,
To narrow down the issue, you could refer to the following steps first.
1. Delete the Lync client 2013 user profile and registry key.
User profile:
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
Registry Key:
HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Certificate:
a. Open Windows Certificate Manager. To do this, press Windows + R, type certmgr.msc, and then click OK.
b. Expand Personal, and then expand Certificates.
c. Look for a certificate that's issued by Communications Server and delete it.
2. Upgrade Lync client to the latest update.
3. Check the DNS records(A records and SRV records) again.
Best regards,
Eric

ThinkVision L2461x - No audio - is HDMI connection forcing the audio jack input off?

I have an XP machine with multiple DVI video cards (n analogue blue d connector though). I have used an HDMI adaptor to DVi so I can connect the ThinkVision L2461x to my PC via the HDMI cable. Video works great, touch is good to (single only). Even the camera is OK. But no audio.
The mute is off, the volume at max, but not a squeak. I wondered if the digital HDMI input was shutting off the audio from the 3.5mm jack. If so, can I over ride this?
Any help would be appreciated.
Thanks.

Hi gadgetboy,
DVI does not support audio function. Even you have got converter but DVI does not have audio channel.
Digital Visual Interface - wiki
http://en.wikipedia.org/wiki/Digital_Visual_Interface
Fred
T61 + X201i

Can the 30" HD Display be used for HDTV?

I was wondering if it is possible to use Apple's 30" display for HD television. I am not talking about the signal going through the computer, as Microsoft does with their media center. I am talking about the display being plugged in directly to the HD Cable Box. Is there a card/adaptor that can be purchased for this? For $1800, it would be nice to be able to watch some HDTV when I am not working in Final Cut Pro.

Thank you for your response. I have got to believe that this feature will be added soon. Asking someone to spend $1800 (and initially $3000) for a display that is limited to working with your computer is a tough sell, at least for me. Now, if it had the HD jacks that worked with a cable box, I would be all over it.
Scott

Can the microphone jack input be configured for a stereo signal from a tape deck without overloadin​g

Similar Messages

Maybe you are looking for

Can the microphone jack input be configured for a stereo signal from a tape deck without overloading