Can the myRio have a SFP+ connector added to it?

I was wondering if anybody knew if you could connect an SFP+ digital output to any of the pins of the myRIO device. The goal of this is to add a 10Gigabit network connection.
Thanks

Hi John,
I have been researching in our community to see if somebody has already tried something similar, but I was not lucky finding something alike. To me it looks like that connection would not be supported by the device. Perhaps you may want to checkthe myRIO Manual to seee if you consider that your connector can be adapted to the inputs that came with the myRIO
Regards,
S.Jimenez

Similar Messages

Question: why is my computer booting up slow? can the battery have anything to do with it?

why is my computer booting up slow,can the battery have anything to do with it?

Hi tecknik!
I'm so sorry for any trouble with calls and messages! I know how important it is to have a properly working phone. Which iPhone do you have? Please reset the network settings: settings/general/reset/reset network settings. Once that is done, please monitor the device and see if that corrects the issue. What is your zip code?
I'm anxioud to get to the bottom of this for you!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible?

Can the iPhone have settings profiles? I want the settings of what apps are using the "call home" automatically set based on my location or the time of day. Is this possible? Of course the GPS location feature will need to be on in order for this to work. But the idea here would be to optimize battery life by disabling the 'call home' requests of apps. The settings profile should also support downloads as I would like to download and allow it when I am on WiFi but not so much when I am using my cellular data.

No, this is not possible as the sandboxed nature of iOS would not allow any app to modify another app like that. Such a feature would have to be enabled by Apple as a part of iOS itself. You can submit feedback to Apple about the idea if you wish to.
https://www.apple.com/feedback/

Can the end of a MagSafe connector be repaired without replacing the whole power adapter?

I'm so frustrated with Apple's support. I'm trying to keep my temper in check as I write this. I go online to try and find out, if the tip of a MacBook Air power adapter can be replaced. They eventually become frayed because of the rubber compound they use doesn't hold up with accidential crimping. The rubber splits. We have five MacBooks in this house, none older than four year, two are about a year old, and two of the five became frayed after use, and are out of warranty. (I'm not going to scam on Apple and say the old one is the new.) We've also purchased additional power adapters so it's hard to say which are which but safe to say the frayed are older than a year. Both are the newer L connector MagSafe 1. I went to Apple support, and after a few questions, you first have to type in a serial number, so I guess which laptop and type in the number. It then says "sorry you're out of warranty, do you want to spend $19.95 to get your question answered?" I just want to know, yes or no, can it be fixed by Apple and what do they charge and they want to charge me just to ask the question. How incredibly dumb to make a power adapter that doesn't have a chord you can just easily replace! Does anyone here know the $19.95 answer?

Patching together an electrical lead with solder and heatshrink is not condusive to a lasting and aesthetically pleasing solution.
.... its also dangerous

Can the network have an influence if TTL is 0 ?

Hi,
We are using Coherence 3.5.3 and have 3 windows services running that form 1 cluster on a single windows 2008 machine. The TTL is set to 0 since there is no need to leave the physical machine as the 3 JVMs run on the same pc. Could it be that the connected network still has an influence? If TTL is 0, does the communication between the JVMs (and thus the nodes of the cluster) still go over a network card ?
Are there things I can do to check this?
This is the logging I get from Coherence on the cluster:
21 二月 2012 21:26:48,761 [Logger@9219882 3.5.3/465p5] INFO Coherence - 3.5.3/465p5 (thread=DefaultCacheServer, member=2): Started DefaultCacheServer...
SafeCluster: Name=tmsngCluster
Group{Address=228.1.2.3, Port=34405, TTL=0}
MasterMemberSet
ThisMember=Member(Id=2, Timestamp=2012-02-21 21:26:46.64, Address=192.168.0.100:8089, MachineId=14549, Location=machine:WIN-OJ9GGEALAL5,process:368,member:INPUT1, Role=Input)
OldestMember=Member(Id=1, Timestamp=2012-02-21 21:26:16.29, Address=192.168.0.100:8088, MachineId=14549, Location=machine:WIN-OJ9GGEALAL5,process:792,member:PROCESS1, Role=Process)
ActualMemberSet=MemberSet(Size=3, BitSetCount=2
Member(Id=1, Timestamp=2012-02-21 21:26:16.29, Address=192.168.0.100:8088, MachineId=14549, Location=machine:WIN-OJ9GGEALAL5,process:792,member:PROCESS1, Role=Process)
Member(Id=2, Timestamp=2012-02-21 21:26:46.64, Address=192.168.0.100:8089, MachineId=14549, Location=machine:WIN-OJ9GGEALAL5,process:368,member:INPUT1, Role=Input)
Member(Id=3, Timestamp=2012-02-21 21:26:46.67, Address=192.168.0.100:8090, MachineId=14549, Location=machine:WIN-OJ9GGEALAL5,process:3272,member:CLIENT1, Role=Output)
RecycleMillis=240000
RecycleSet=MemberSet(Size=0, BitSetCount=0
Services
TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.0.100:8089}, Connections=[1]}
ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
DistributedCache{Name=BackService, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=1021, BackupCount=1, AssignedPartitions=0, BackupPartitions=0}
ReplicatedCache{Name=ReplicatedCache, State=(SERVICE_STARTED), Id=13, Version=3.0, OldestMemberId=1}
InvocationService{Name=DefaultInvocationService, State=(SERVICE_STARTED), Id=14, Version=3.1, OldestMemberId=1}
DistributedCache{Name=InputBackService, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=1021, BackupCount=1, AssignedPartitions=1021, BackupPartitions=0}
The pc has multiple network cards: One on 10.101.16.182, one on 192.168.0.109
This is the ipconfig output (Sorry for the Chinese, I don't understand it, but this is at a customer site):
C:\Users\Administrator>ipconfig
Windows IP 配置
以太网适配器本地连接 4:
媒体状态 . . . . . . . . . . . . : 媒体已断开
连接特定的 DNS 后缀 . . . . . . . :
以太网适配器本地连接 3:
媒体状态 . . . . . . . . . . . . : 媒体已断开
连接特定的 DNS 后缀 . . . . . . . :
以太网适配器本地连接 2:
连接特定的 DNS 后缀 . . . . . . . :
本地链接 IPv6 地址. . . . . . . . : fe80::783d:f432:79d0:15e6%12
IPv4 地址 . . . . . . . . . . . . : 192.168.0.109
子网掩码 . . . . . . . . . . . . : 255.255.255.0
默认网关. . . . . . . . . . . . . : 192.168.0.1
以太网适配器本地连接:
连接特定的 DNS 后缀 . . . . . . . :
本地链接 IPv6 地址. . . . . . . . : fe80::ccaf:a85:eb9:90f9%11
IPv4 地址 . . . . . . . . . . . . : 10.101.16.182
子网掩码 . . . . . . . . . . . . : 255.255.255.0
默认网关. . . . . . . . . . . . . : 10.101.16.181
隧道适配器 isatap.{4137279E-1278-4A28-985F-A9DFCF8827BE}:
媒体状态 . . . . . . . . . . . . : 媒体已断开
连接特定的 DNS 后缀 . . . . . . . :
隧道适配器 isatap.{C2A0F541-74DF-4C45-8F96-3442ED0817CD}:
媒体状态 . . . . . . . . . . . . : 媒体已断开
连接特定的 DNS 后缀 . . . . . . . :
隧道适配器 isatap.{982A9A61-F542-4CC2-812D-6A3A4D0F7749}:
媒体状态 . . . . . . . . . . . . : 媒体已断开
连接特定的 DNS 后缀 . . . . . . . :
隧道适配器 isatap.{EFBCBB08-33F9-426A-A690-0CD8A6B69650}:
媒体状态 . . . . . . . . . . . . : 媒体已断开
连接特定的 DNS 后缀 . . . . . . . :
隧道适配器 Teredo Tunneling Pseudo-Interface:
连接特定的 DNS 后缀 . . . . . . . :
IPv6 地址 . . . . . . . . . . . . : 2001:0:4137:9e76:144b:15a4:3f57:ff92
本地链接 IPv6 地址. . . . . . . . : fe80::144b:15a4:3f57:ff92%19
默认网关. . . . . . . . . . . . . : ::
C:\Users\Administrator>
I also had a look at this documentation: http://docs.oracle.com/cd/E14526_01/coh.350/e14527/installcoh.htm
but it does not help much. The last line says "If all the preceding options fail, set up Coherence to run on a single host." but no link to documentation on how to do that.
regards,
Wim

user10435421 wrote:
Hi,
We are using Coherence 3.5.3 and have 3 windows services running that form 1 cluster on a single windows 2008 machine. The TTL is set to 0 since there is no need to leave the physical machine as the 3 JVMs run on the same pc. Could it be that the connected network still has an influence? If TTL is 0, does the communication between the JVMs (and thus the nodes of the cluster) still go over a network card ?
Yes, it can have an effect. Let's suppose that there is another cluster on another box which uses the same cluster address, but does not have TTL set to zero, thus its packets can reach your machine. You however won't have a chance to reply due to your sending with TTL=0.
In this case those packets can cause issues e.g. with forming the cluster on your machine because you will see that there is another cluster somewhere with the same address, but you can't communicate with it. This can prevent a cluster starting up on your machine.
Even if this happens after your cluster is formed, it may still cause error messages in the log mentioning that you received a heartbeat message from a different cluster on the same cluster address.
An easy workaround would be to choose a different (unused) cluster address for the cluster on your machine.
Best regards,
Robert

How can the Extreme have two IPs on one computer?

My computer or the Apple Extreme Base Station (AEBS) started having a problem recently while two other computers are still working fine!?
This network setup (described further below) was running fine for a month before one computer started getting unhappy.
PROBLEM SYMPTOMS:
The one computer can not get on the Internet. I checked the IP of the computer with the problem and it is 10.0.1.2 which was assigned by the AEBS. Subnets on everything involved are all 255.255.255.0. I tried to ping the router but could not reach it at 10.0.1.1 where it should be.
I bring up the Aipport Admin Utility and it lists the router at 254.128.0.0 !? I try to configure the router and it gets an error saying it can't connect. If I click the "Other" button and manually enter 10.0.1.1 to configure the router that works fine!
Two other computers (Win XP Pro and Windows 2000) are plugged into the same switch and they get to the router just fine.
Computer with a problem:
Windows XP Pro with SP 2 and all the latest security updates.
I'm running the Airport Admin Utility for Windows version 4.1.
Apple Extreme was purchased two months ago. Running Version 5.7.
SYSTEM SETUP:
The AEBS is set up to dial out (bummer but it's the option at this location) for Internet access. The WAN ethernet port is empty. The LAN ethernet port is connected to a Linksys 5 port switch - I don't have the version number right now but it was purchased 2 months ago.
The switch connects by ethernet cable to the XP Pro system that is having the problem and to the Windows 2000 system that is fine. A XP Pro notebook connects to the AEBS wirelessly without problem. Another notebook connects via cable to the switch or via wireless to the AEBS without problem.
The Airport Extreme is running version 5.7.
THINGS I'VE TRIED
Turning off all firewall software.
Uninstalling the Airport Admin Utility and reinstalling.
Removing the switch and going straight from the problem computer to the AEBS. No good.
Reseting the AEBS to factory settings and reconfiguring it.
Rebooting the XP problem computer.
Repairing the IP on the XP problem computer.
Resetting the switch.
Using different ports on the switch.
Do any of your rocket scientists have any suggestions?

Oops...I moved this to the Extreme forum since it has nothing to do with the Express

Can the RV180W have multiple SSIDs with different security configurations?

I am trying to configure the RV180W with a guest network and regular wireless network. The regular wireless network is just a bridge to the wired network, using WPA2-Pers for authentication. I built and enabled another wireless SSID, using a different VLAN and no authentication. I can get both SSIDs to function at the same time if I turn off security. Once I turn on Security, the regular one no longer functions.

It is actually all in the manual:
SEE: PDF MANUAL
Page 63 of PDF and onwards
Do note that you need to assign multiple VLAN per SSID. Check the manual it is there :D
and based on the manual you need to enable multiple VLAN support: See page 34 of the manual: Configuring Virtual LAN (VLAN) Membership
Don't forget to rate and mark as answer helpful posts! :)

To use eprint, can the printer have a wired connection

I have trouble connect my iPads to my HP Officeject 8600 when my printer has a wired ethernet connection. I have no problem when it is wireless connected.
Does the connection matter?

je n arrive pas a avoir la connection avecservices web
la page test reseau sans fil confirm que tout les parametre son ok
sur l ecrans j ai un message
connection aux services web impossible veiller verifier l acces a internet et reesayer
mon imprimente est HP ENVY 110

Just updated my iphone. Now I can se I have two? iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first

Just updated my iphone. Now I can se I have two! iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first account where there is no available password. I have tried several times to reset the password, bun I don't get the information I need - I have no access to email. What can I do?

Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks

Mac OS X v 10.5.8.    My "Weather" on the dashboard no long works. I have deleted it and added it anew and it still does not work. How can I get it back?

My "Weather" on the dashboard no long works. I have deleted it and added it anew and it still does not work. How can I get it back?

You must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.(10.9/Mavericks is the only download avaiable now without specially calling Apple).
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

HT4623 I screwed up. I was trying to SYNC and something (error msg) happened. I tried to continue the SYNC and now my IPhone is dead. All I can get when I turn it on is a picture, from bottom to top, I have an WSB connector, an up arrow, and an iTunes

I screwed up. I was trying to SYNC and something (error msg) happened. I tried to continue the SYNC and now my IPhone is dead. All I can get when I turn it on is a picture, from bottom to top, I have an WSB connector, an up arrow, and an iTunes icon. I can't use the phone. And it's my only phone. What can I do to rectify this situation.

It's telling you to connect to ITunes and restore your phone. This will have to be done with a USB cable and iphone connector that came with your charger.

Kintex 7(XC7K160T-2fbga484) differential pins MGTXTXP1_115 and MGTXTXN1_115 are connected inversely to the SFP+ connector

Hi All,
Kintex 7(XC7K160T-2fbga484) transceiver differential pins MGTXTXP1_115 and MGTXTXN1_115 are connected inversely to the SFP+ connector.
Pin MGTXTXP1_115 is connected to SFP TXN pin of sfp connector.
Pin MGTXTXN1_115 is connected to SFP TXP pin of sfp connector.
By miss,i have routed it reversely. What are problems i can expect from this and please suggest some solutions for the same.
Thanks and Regards
Harsha N

Hi
See "TX Polarity" section in the following user guide: http://www.xilinx.com/support/documentation/user_guides/ug476_7Series_Transceivers.pdf
Thanks,
Vinay

How can I determine the type of video out connector I need?

Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon T

Thanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T

HT202157 Can the Apple TV be added to I-tunes as a device?

Can the Apple TV be added to I-tunes as a device?

Another question?
I rented a movie on the Apple TV.
I have 10 MBPS service and it would not down load.
Never got to see the movie on the Apple TV.
Later I tried to watch the movie on my PC though I-Tunes.
There was no play button to play the rented movie .
Yet when I tried to rent it again I-Tunes told that I had already rented the movie
And asked me if I was sure I wanted to rent again.
Of course no, it told the just play the movie by clicking the play button.
However, there is no play button on I-Tunes screen.
I am really frustrated! !

In chrome I'm getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer?

I have both safari and chrome, because I'm used to chrome. The only extension I have is Google docs. I started getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer? People suggest programs to do it, but how do I know they won't make it worse?
Is someone from Apple here and can answer?
Thanks!

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Can the myRio have a SFP+ connector added to it?

Similar Messages

Maybe you are looking for