Can the new AirPort Express Base Stations be daisy-chained?

I have to create a wireless network over a considerably large space (an entire museum), and was previously under the impression that I could endlessly extend the signal from my AirPort Extreme using a series of AirPort Expresses. In fact, the Apple Store Business Team led me to believe this. I have purchased five Expresses (three of which are the new Base Stations, one is the slightly earlier version (801.11n), and one is older (801.11g).
I am now aware that I cannot simply "extend" the network more than once, and that with older models you had to use WDS to relay the network to remote AirPort Expresses. But can even this be done with the new base stations? Airport Utility 6.0 seems to provide much less functionality than the ealier versions. I still have one macbook with Airport 5.x, thankfully, although it still doesn't make it clear how to change the Express into a WDS relay.
I never would have bought these products if it was clear that you could only really extend the network by 50 feet in any direction. Hopefully, this isn't the case.
Thanks,
-mf

Thanks, Shawn, although I'd looked at that article before and I still have the same questions:
- It says "WDS is designed for 802.11g, and shouldn’t be used for 802.11n devices. Wi-Fi base stations may include AirPort Extreme (802.11g) and AirPort Express (802.11g)." Is this truly prohibitive, or just a suggestion?
- It also includes steps such as "From WDS Mode, select WDS remote." I see no such options in AirPort Utility 6.0, nor can I find them in version 5.6. Am I missing something, or do the hardware upgrades (to 'n') mean that Apple software won't support WDS at all anymore?
-Mike

Similar Messages

Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

Hi
Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
Thanks in advance

The first generation Time Capsule was not a simultaneous dual band device.
If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

Profiles in New Airport Express Base Station

How do I set profiles in the new Airport Express (802.11n) base station. I checked every tab in Airport Utility but couldn't find it.

The AirPort Express Base Station (AX) can store up to five different configuration profiles. You will need to use the AirPort Utility, located in Applications/Utilities to create & save these profiles.
To create a new profile:
o Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click "+" to create a new profile; give it a name, and then, click OK.
o Set options, such as network name, passwords, Internet connection method, etc.
o When done setting the options, click Update.
To switch profiles:
o Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
Just remember to switch to the desired configuration profile before removing power from the AX.

Can't read airport express base station configuration wirelessly

The setup:
2TB time capsule that takes the ethernet feed from the cable modem for internet access.
Airport express 802.11g plugged into speakers for Airtunes. No ethernet connection, just a wireless network.
The problem:
I can only read the airport express base station configuration when the mac is plugged into the time capsule by ethernet cable. This does not happen with the other mac I have on the network. It can connect to both the time capsule and the airport express without any problems. So unless I'm plugged in, iTunes and airtunes doesn't connect to the base station, and neither can Airfoil 3.5 or Airport Utility. Airport Utility does see the airport express. It just doesn't read the configuration wirelessly.
I think this had something to do with elgato eyetv not liking airfoil, but I can't say for sure.
Any thoughts?

When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
Modem/Router Power Recycling - Quick
- Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
- Power-on the BT Voyager modem; Wait at least 5 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
- Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the BT Voyager modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)

Can't see airport express base station....help please. Sitting in cupboard.

Ok, so I've moved house and it's all gone a bit wrong....
Usually I connect my iBook G4 to the internet using an airport extreme base station - ethernet cable goes from airport to BT router - BT Voyager 220V ADSL Voice Router.
All was fine until I moved house. Now I can connect to the internet no problem if the ethernet cable goes straight into the laptop - but I just can't see my AEBS. I've tried switching it on and off to no avail, and was even brave and reset the whole thing, but nothing happens. When I scan using airport utility it just doesn't see it.
When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
I did install some BT home hub software at the weekend so I could log into my brother's network - could this be the issue? Although I have used my laptop wirelessly in the internet cafe next door and that was fine. The computer is also picking up other wireless networks, it just can't see mine. Any ideas?
Thanks, Px

When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
Modem/Router Power Recycling - Quick
- Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
- Power-on the BT Voyager modem; Wait at least 5 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
- Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the BT Voyager modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)

Brand new Airport Express (base Station)

I have an Airport Extreme hooked to a cable modem. This is my base AP.
I have an old Airport Express hooked to my HiFi only doing iTunes
I have an old Airport Express as a WDS remote. (And tied to an Epson printer.)
I have a MB and MBP.
Everything is great.
Now I plug in a brand new Airport Express with 802.11n. I ether set it up manually or via the Airport Utility 'manager'. No matter what I do it does not 'hook' up to my WiFi network. It is always flashing but I can never have it give me internet access.
BTW - I noticed that unlike the other boxes this one (AX-n) does not give the "Wireless Clients" graph in the log screen.

Hello Albert,
Go to: Utilities/Airport Utility then when you setup your new airport express, on wireless tab, check "802.11n (802.11 b/g compatible) and it should work. If you check 802.11n and your network is in g mode, it won't work. I have a dual network, Time capsule, 2 MBP, 2 MB and airport express iTune on 802.11n and another airport extreme with 2 airport express on 802.11n(b/g compatible) for iphone use. Every thing work seamlessly.
Good luck.

MacBook Pro can't find AirPort Express base station

My friend gave me an AirPort Express and I've set it up as a base station before. But the other day it was having problems and I reset it. Since then I have not been able to set up a base station. When I try to set up a new base station through the AirPort Setup Assistant I get the message "The AirPort Setup Assistant was unable to find your base station." I have tried soft resets, hard resets, and even factory resets, but I can't get the base station set up. Any suggestions?
MacBook Pro Mac OS X (10.4.8)

I face a similar problem - the default name of the Airport Express is shown, Internet-Access works, but no way to administrate the Station - it is "not found", although it displays the name of it before. Frustration!

The new AirPort Extreme Base Station

This unit is advertised as 802.11n with connection speed max at 100Mbps. Is this when being used hardwired or wirelessly?
The reason I ask is that my current Belkin router will coonnect at 100 Mbps if it is hardwired but if I use it in a wireless configuration the max I can get is 54Mbps. I checked with Belkin and they said this is as it should be.

It's wireless - using an evolution of the 802.11g standard called 802.11n.

Connecting to multiple Airport Express base stations at the same time?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single internet connection behind my stereo and it's connected to the Pay TV. My options seem to be getting a new line installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

Steady green light on A1084. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it. Is there a fix?

Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier. Is there a fix?

I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp. The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express. It would be nice to play Airtunes while simultaneously accessing the Internet. I don't understand your question about what program I am using for which I require AirPlay. I am not learned about computers in general, and even less so about Macs than PCs. I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier. I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo. I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

Can I use an Airport Express Base Station to extend non-Apple router range?

We have a Netgear 802.11n router in our house. I just bought a MacBook Pro and now am accessing out wifi from the other end of the house along with my iPod Touch 4g. Both seem to show at best about half strength signal strength. House is small and nearly all devices on same floor.
Can I use the Apple Airport Express Base Station as a bridge to extend our wifi network giving me stronger signal for my Apple devices or will it only work with Apple routers? Netgear and others like Hawking make wifi range extenders and those are still under consideration.

It would be extremely unlikely that an AirPort Express would "extend" the wireless network produced by the Netgear router using wireless only. Apple's "extend" feature appears to be proprietary among Apple "n" routers. As far as we know, it does not work with any other manufacturer's products for the purpose of wireless only extension.
If you are planning to connect the AirPort Express to the Netgear using an ethernet connection, then it could be configured to extend that way.

Connecting to multiple Airport Express base stations for internet and TV?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single ethernet connection behind my stereo and it's connected to the Pay TV. My options seem to be an ethernet splitter (maybe - any ideas?), getting a new ethernet connection installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

AirPort Express Base Station - Use with HP Laser Jet & Time Warner

Have this brand new AirPort Express Base Station that I want to install in place of the Linksys router that is connected to the Time Warner cable base station delivering internet connection so I can connect HP Laser Jet 6/6mp printer via USB on the AirPort Express. Any recommendations or suggestions ?

Thanks
The question is this
If I use the Airport Express Base Station as wireless router for internet service coming in from Time Warner AND plug the HP LaserJet printer USB plug into the AirportExpressBaseStation will I be able to overcome the communication problem I am having when I plug in the HPLP's USB plug directly into the MacBookPro and cannot get use of the printer due to language ( Apple Talk vs Post Script ) problems ? Probably not make any difference since the USB female on the AEBS is just a conductor !
While I have you ! How do Mac people delete backwards like PC people do when they press the delete key and letters delete from left to right ?

Problems setting up AirPort Express Base Station

I'm a real newbie at this, so pardon the ignorance in advance haha.
I just bought a new Airport Express base station. I wanted to be able to stream my music via iTunes to my living room. I'm just having problems getting the aiport utility to recognize the base station. I have the base station plugged in and everything. Right now it is flashing the amber light.
This is my set-up. I have a Netgear WGR614 54MBPS wireless G router connected to my broadband modem. From the router I have it connected to my desktop thats running windows xp pro. The network is up and running just fine. I can connect via any laptop or other device with wifi. Now, how do I get my wireless router to pick up the base station? Do I have to wrong idea here or something? haha. thanks in advance!

In the Airport Utility for your Airport Express, you should set the Airport Express in "client" mode. You might have to connect your Airport Express directly to your router with ethernet cable, while doing this. If you are using encryption, make sure that you enter the encryption number onto the express that your router/access point is using. Again, if you plug the Express directly into the router, you should be able to modify the settings quite easily. Once you unplug the express, it will blink orange for awhile (maybe a minute), so wait a bit.
Good luck.

Airport express base station....connecting?

i have a pc and have bought a new airport express base station, i have ordered a new imac G5 and really bought the router for it....but when i tried to set up the pc with the express base station i noticed the rj11 cable doesnt fit into the base station socket...it seems to be an ethernet socket (whatever that is I dunno) can ne 1 tell me what I need to go wireless..(perhaps a brain would help!!)my modem is a bt voyager 105 usb adsl ......help would be gratefully appreciated!!
bAz Belfast

With the Express, you'll either need a new modem that has an Ethernet port or you need to set up the PC's networking configuration to bridge the USB modem's network to the PC's Ethernet port and then connect the Express to the PC, which would require that the PC be stationary and booted whenever you wanted to access the Internet. I wouldn't have a clue how to accomplish the latter, but it should be doable and you should be able to find information online somewhere.

Can the new AirPort Express Base Stations be daisy-chained?

Similar Messages

Maybe you are looking for