Can the NI 4350 card output a continuous digital frequency?

I am trying to send various frequencies of 0's and 1's through the digital lines using the NI 4350 (USB) but do not know if this is possible. Currently this is done via the printer port to control the speed of a stirrer but slows the computer down. I was wondering if this card can produce a continous pulse or has a buffer which can output a continuous frequency until a new fequency is specified.
Any ideas would be great. Thanks

The digital lines on the 4350 are capable of static or digital operation only and the speed depends on the software and operating system. You may want to consider either a counter/timer device or a 653x high speed digital device for pulse train generation.

Similar Messages

HT201209 can the same gift card be used with a differencet itunes account?

can the same gift card be used with a differencet itunes account?

No, a gift card can only be redeemed onto one account - it can then only be used to buy items for that account (it can't be used to gift content to another account).

I was getting and iTunes gift cards and I want to ask that can the iTunes gift card can be use for the app store.

I was getting an iTunes gift card and I just want to ask that can the iTunes gift card be use for the app store.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102630)

Can the itunes gift card work on the app store?

Hi. I have an iPad and I want to download this and I want to know if you can use the iTunes gift card for the App Store. Leave any messages below. Thanks!

Welcome to the Apple Support Communities
Of course. You can use the iTunes gift card to purchase content on the iTunes Store, the App Store, the Mac App Store and the iBookstore

Can the PCI-6602 card be configured for 3.3 volts?

I would like to be able to configure my pci-6602 card to output 3.3 volt signals either in software or with MAX. Can this be done?

The 6602 uses only 5V logic for it's driven outputs, but there is a Tri-State Enable feature which drives the output to high impedance instead of hi. This allows you to pull up the outputs to the required logic voltage.
The Tri-State Enable is found using the wired OR map in the DIO Port Config.vi

How far can the apple n card reach?

I live in a townhouse community and with the g card I can see 7 to 10 other wireless routers. Some of the access are locked down and some are open. The ones that are open are to far away to have reliable connection. My question is will the update be able to give me further reach to those access point?

The update will do nothing to improve your range on AB or G, it will enable you to use the N frequency when combined with an N wireless router, will give you significantly better range and connectivity.
If one of the networks in your area happens to be an N (unlikely because they are so new) then you would most likely have no trouble hacking/logging into it.

Can the RS-422 card's transfer rate reach 153.6kb/s?

I want to buy a RS-422 card such as PXI-8421/2(777735-02).I want its transfer rate will be 153.6kb/s.I don't know if NI's card can support this rate.

I believe so.
Chris Rake answered this in his answer here;
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=50650000000500000021870000&HTHREAD=000034593&UCATEGORY_0=_246_%24_13_&UCATEGORY_S=0
While you are there, go ahead and give him four stars for answering your question before you asked!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Can the mini vid card drive a 1920x1200 screen?

Hi guys, thinking about getting a mini and wonering if it can drive a dell 2405?
The g4 or the intel version i have no preference . . . . well g4 version would be cheaper!!
Thanks Kalel

It was a co-worker's monitor and I only used it for a bit. It looked good - even video - but I'll readily admit I'm spoiled by Apple's displays. I don't prefer dell's way of doing backlights - but that is a really, really minor and picky quibble.
If I didn't have Apple displays or couldn't afford them - dell would be my second choice at this point. Keep in mind I spend up to 12 hours a day regularly in front of a display - sometimes late at night and not having fatigued eyes is worth a lot to me. Dells have many more ports/butons/controls so if that is beneficial to you, then that's a plus for their models.
Sorry I don't have a g4 mini to test with.

Can the IMAQ 1424 be configured for other digital cameras?

I hope the answer is yes! Because when I read:
�Compatible with Cohu, Dalsa, Hamamatsu, Kodak, and Pulnix cameras�
I didn�t take that to mean
�ONLY COMPATIBLE with Cohu, Dalsa, Hamamatsu, Kodak, and Pulnix cameras�
That is to say I was operating under the impression that you could configure the IMAQ 1424 to work with other cameras, as long as you have all the pertinent information of said camera. What worries me is on my initial attempt in the IMAQ software it says that the option to configure a camera only works for non-digital card/cameras. I haven�t got into the software and hardware in great detail yet, maybe I will find that this is a non-issue but I just thought I would ask,
in that if the answer is no I wont waste anymore time. So, if I can configure the 1424 to work with �OTHER� cameras, can someone point me in the right direction? Thanks a 10^6
Grant

Grant,
Yes, it can be used with other cameras. The list of compatible cameras only includes the ones NI has already written configuration files for.
For cameras not in the list, you need two things. You need a cable that will connect all the appropriate signals. This may require a terminal block or custom cable. You will also need an camera configuration file, that tells the camera how to read the video signal, how to react to different signals, etc. The main problem is that NI does not document the format of the configuration files, so it can be difficult to write your own. They are usually willing to help by writing the basic file, but you are on your own if you want to implement anything fancy. If you study other files, it isn't too difficult to figure
out how to do it.
I would contact NI and discuss the specific camera you are trying to connect to the 1424. If it is a common camera, they may already have the files or cables you need (or know where they can be found). If it is not a common camera, they can tell you what needs to be done and how difficult it will be to do.
Bruce
Bruce Ammons
Ammons Engineering

Can I find the part numbers for the output drivers on the PCI-6534 Card?

We are planning to use an NI-6534 card to test very sensitive hardware. The DAQ will simulate the interface to which this particular piece of hardware will be connected.
Our concern is that there is some way that we can damage our hardware during test.
The best way to insure that this is not a concern would be to say that the DAQ interfaces to our hardware in the exact same way as our real interface. This of course is not likely, so we need to understand the differences. To do this I think we need to compare the I/O spec of the devices directly connected to our hardware under test on both the DAQ and our interface.
Of course we need to know the part number of the NI I/O output drivers.
The kind of data I think we are interested in is:
Voh, Vol, Ioh, Iol, and transition times...
Thank you for any help you can provide.

Hi goldbach,
The other specification you were looking for, slew rate, is typically between 2.75 and 4.5 ns depending on your load. The following knowledge base discusses briefly on this point.
DIO-32HS (6533) Cabling Issues
http://digital.ni.com/public.nsf/websearch/783D15B155FAC6F1862566B3006A32F0?OpenDocument
Hope that helps. Have a good day.
Ron

HT3702 Jakarta, 05th September 2012 Subject : Can't buy the gold in crime city HD. To whom may concern : My name is Mr. Gunawan, now I was playing crime city hd, and I have buy 2 times gold in that game, using the same creadit card. but when I want t

Jakarta, 05th September 2012
Subject : Can't buy the gold in crime city HD.
To whom may concern :
My name is Mr. Gunawan, now I was playing crime city hd, and I have buy 2 times gold in that game, using the same creadit card.
but when I want to buy the third times, can't it's said "Please contact itunes support to complete this transaction"
so I was think may be something wrong with my credit card, and I direct call my credit card to check to make sure that I still have limit,
according to my credit card customer service, everthing is ok, nothing wrong with my payment, the limit is more that enough for the next transaction.
I try to buy it again, but still can't and it's said "Please contact itunes support to complete this transaction"
pls kindly advise. So I can keep continue playing playing crime city hd.
Best regards,
Gunawan
<Personal Info Edited By Host>

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address from your post.
You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT204003 does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

Some time in the future (Starbucks Tweeted the other day "by the end of the month") the Starbucks app will be Passbook enabled. When that time comes, you will log into the app with your credentials, select your Starbucks card, and you should be given an opportunity to add that card to Passbook at that time. From there, whenever you walk into a Starbucks the alert will be displayed on the lock screen, just slide your finger across the the alert and show your card to pay.
Now, I have not seen the new app, of course, so I am just speculating based on how the Walgreens, Fandango and Target apps work. Also, I am not sure yet if this will work in any Starbucks, or just the one that you consider your favorite, or primary location. Again, that is just based on how the other apps seem to work. We'll see.

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow? Thank you, Filippo

On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo

I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks

I have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

i have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

Brandon2184 wrote:
The iPhone 4 uses a "Nano SIM"
The CDMA iPhone 4 does not use a SIM at all. There is no SIM slot. It is a pure CDMA phone.

Can the NI 4350 card output a continuous digital frequency?

Similar Messages

Maybe you are looking for