Can the port in my computer be replaced?

I have a MacBook that I purchased in 2009. When I plug in my DisplayPort to VGA adapter, it no longer works. The VGA adapter itself is fine; it seems as though it's not connecting to whatever it needs to connect to inside the computer. Can the port in my computer be replaced? For several months now, I've had to hold the DisplayPort to VGA adapter a certain way to make sure it connects when I initially put it in, but now it's not detecting it at all. I'm a teacher and use my laptop every day to project presentations etc., so I need to get this fixed asap.

OK so that port shows the amount of use it's had.
Do you have a competent tech at the school where you work?
You could actually do the analysis. We need to look inside the port itself (socket) and the plug you're using for damage to the conductors. Whether they're damaged or missing. If they all look clean, not deformed/displaced and not missing then the damage will be on the logic board itself. It will be a broken solder connection. There are quite a few of them and they're tiny. The logic board will have to come out and the solder connections examined.
I have repaired things like this and it will take someone who can do near micro soldering to do the repair. This was at a charter school doing work for teachers and the kids who went there.
If that's not the problem or you can't find someone who can do the repair then you will have to replace the logic board as Allan says. You can ask Apple but I'm not sure they'd work on it.
Where are you located?

Similar Messages

  • Can the heat from my computer hurt my battery?

    Hi I just had a second battery put into my almost 4 year old macbook. The 1st replacement was put in last June I believe. I had it replaced again a few days ago because it would die out within 20 minutes and the computer wouldn't go to sleep it would just shut off. So I'm trying to keep this new battery healthy for as long as possible. What I was wondering was if the heat from the computer running can hurt my battery in the long run. The bottom of my computer is pretty much always hot. It is currently at 150 degrees F. I downloaded smcFanControl to increase the fan speed on my computer in hopes it would keep it cooler. I wanted to know if there was anything else I could do for it. Also how frequently should I cycle through my battery?
    Thanks,
    Kristina

    " The bottom of my computer is pretty much always hot. It is currently at 150 degrees F."
    On what sort of surface is your computer on? If it is on a flat hard surface, the temperature of your computer is too hot, and there's something wrong.

  • How to get the ports on a computer?

    Hello!
    Do anyone know how to list which ports that are not locked/blocked on a comuter?

    you could always loop 65000 times (or however many ports there are), trying to set up a connection to a port, if an exception is thrown (i.e. it the port is being used) then simply record what port that was.
    Mik�

  • Can the 64gb iPad with Retina Display replace a laptop?

    I'm looking into getting the new ipad to use primarily as a laptop.. i would be doing alot of word processing, keynote presentations and the odd imovie. i'm planning on keeping my current laptop if needed but hoping to use it sparingly.. so would the new ipad be able to satisify my needs?

    I can go for days without using my computer. However, there is a lot that hte iPad just can't do, or can't do well (it was created to be a data consumer, not a data creator, so you have to be prepared to find work arounds or tweaks to do what you want to do)
    If you don't have or keep your laptop, then you're going to be dependant upon cloud services to back your info up. I may sound paranoid, but I really don't like trusting a third party with my data. You may not share my issues but if you don't have a local backup, then you will need something.
    Also, as noted, all apps are skinnied down versions of their original programs. I use Documents to Go, and it does just fine for basic typing, etc, but there isn't any support for in depth formatting or complicated formulas in excel. So you need to decide if the basic functions will do what you need them to do.
    Even with 64 gig, for example, if you take photos, you're not really going to be able to backup your images etc.
    If I were making declarations....a good short term replacement, a good travel companion, but I'd only consider it a permanent replacement for a person that really does nothing beyond e-mail and the occasional e-book reading.

  • Phone suddenly stopped charging. Tried different cords but still nothing. Can the port be repaired?

    It was fine this mmorning then went to plug it in and nothing happened

    It's important that we get your phone charging again, Kschuman11. Do you notice any damage to the phone or to the charging port? Can you try using your phone in safe mode and then connecting the charger: http://vz.to/1pCTn6d
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Can the OBI welcome/spash screen be replaced with a custom web page?

    Thanks

    Yes, you can do so by customizing a copy of the logoncontrolmessages.xml located in the <OracleBI Home>\web\msgdb\messages folder.
    For steps on how to customize the messages, look up Chapter 10 in the Presentation Services Admin Guide.
    Good luck,
    Son Ly

  • Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

    Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

    When this problem first happened, I searched for threads and found a few.  See be;ow links:
    http://support.apple.com/kb/TS1502
    Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
    It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

  • Can the screen on my i phone 4s be replaced

    Can the I phone 4s screen be replaced, I have contacted Apple who say it cannot be replaced because of the technicality of the phone, apparently they will replace/give me a whole new phone for £139.99 upon attending a 'genius' appointment?
    Just a bit confused as I've seen companies offering to fix the screen only for around £80.00 but I was wondering why Apple would say they couldn't if it WAS actually possible?
    Please note this is an I Phone 4s not just an I Phone 4.
    Any help/advice would be appreciated!

    Apple does not fix a user's iPhone, they replace it. This is quite common with smartphones, from any manufacturer; it's generally just not cost-efficient for them to try and do repairs in-store. There are other companies who get parts from unknown sources and can do a repair, but you lose all warranty if you have that done. So it's up to you which option you wish to pursue.
    Regards.

  • ACE: Can the ft-vlan port be used for other vlans or not?

    Hi People,
    I am a bit confused reading cisco's documentation. I am now using the ft-vlan in a dedicated port (no other vlans), but I would like to use it as a normal port in order to use it in a context.
    From cisco website:
    "You cannot use this dedicated FT VLAN Ethernet port for normal network traffic; it must be dedicated for redundancy only.
    When you specify an Ethernet port or a port-channel interface as a dedicated FT VLAN, you have the option to either configure the dedicated VLAN as the only VLAN associated with the Ethernet port or port-channel interface, or to allocate it as part of a VLAN trunk link (see "(config-if) switchport trunk allowed vlan"). Note that the ACE automatically includes the FT VLAN in the VLAN trunk link. If you choose to configure VLAN trunking, it is not necessary for you to assign the FT VLAN in the trunk link along with the other VLANs."
    First it says, you cannot use this port for other traffic, and then it says this port can be a trunk port. If the port is trunk, then obviously you pass other vlans too. Right? or not? So can the port that has the ft-vlan be used in a context with other vlans?
    thanks,
    george

    Then simply do not use the 'ft-port' command.
    This command "auto" configure the interface to be switchtrunk with one vlan  allowed.
    If you reconfigure the interface with your own switchport command, all you risk is some kind of collision or a future software version which will deny this kind of configuration.
    Here is what I use to have vlan 500 part of a normal trunk interface.
    But be aware, that if your interface is overloaded, FT traffic could get dropped and therefore you will end up with 2 active units causing major traffic disuption.
    This is why we recommend to run FT on its own interface with no other traffic.
    Generating configuration....
    interface gigabitEthernet 1/1
      switchport access vlan 1000
      shutdown
    interface gigabitEthernet 1/2
      shutdown
    interface gigabitEthernet 1/3
      switchport trunk native vlan 20
      switchport trunk allowed vlan 10-500
      no shutdown
    interface gigabitEthernet 1/4
      shutdown
    ft interface vlan 500
      ip address 192.168.77.2 255.255.255.0
      peer ip address 192.168.77.1 255.255.255.0
      no shutdown
    Gilles.

  • TS2771 i am trying to fix my ipod touch tryed password to many times the problem is my usb port on my computer does not work what else can i try?

    my sons ipod is disabled from trying password to many times my usb port on my computer does not work. what else can i do to get this disabled off my sons ipod please help!!!

    The only thing you can do is place the iPod in Recovery mode and restore via iTunes on a computer. It is a good security feature.

  • I got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this?

    i got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this and get my information back?

    Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
    The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
    More info on backups here: http://support.apple.com/kb/HT1766

  • How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100 format) out the serial port of my computer?

    I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?

    If I recall, CTRL-D is EOF on most ASCII tables.
    You'd probably have to use an escape sequence
    or if you can use an unsigned 8-bit that might be
    easier.
    In article <[email protected]>, TLS
    wrote:
    > How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
    > format) out the serial port of my computer?
    >
    > I am trying to write a vi that interfaces with a piece of OEM
    > equipment that is set up to talk with a VT 100 terminal. I can't seem
    > to locate the ASCII equivalent string (if there is such a thing) of a
    > CTRL D. Is there a vi that emulates VT 100 commands?

  • My iphone wont charge can the charging port be repaired or replaced

    my iphone wont charge can the charging port be replaced or repaired

    Apple does not repair devices at all.
    As stated, you can elect to find a local repair shop to do the work, but understand that Apple does not sell parts either.
    Alternatively, you can choose to do an Out of Warranty replacement via Apple and get a 90 day warranty on the replacement device.
    Another option would be to replace the device with a more current model.

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • Can the iPad truly replace a "normal" computer yet?

    My wife and I are looking to replace two computers. One is her Sony Vaio laptop, the other is my iMac G5. I mentioned to her that we could both get iPads, one for me and one for her and that it would really do everything we would need them to do. I know that the collective opinion is that tablets are the future of computing - proof being Apple releasing a 128GB iPad w/ Retina today. If I were to "start from scratch", as in, I don't have a PC with this content already on it that can be easily synched to the new iPads - I just have two iPads that I need to get my physical music albums onto as well as GBs of photos from my camera. Can you get you're own content to the iPad without the help of a traditional computer - be it laptop or desktop? Is there some sort of USB adapter for the new iPads that you can use to connect other devices to it for uploading content - like a external CD-ROM drive or a camera?

    Great discussion, but I don't think anyone has addressed the true question. ddemuth78 isn't asking is it feasible, he's asking if it is even possible. He has already stated the iPad does everything he and his wife do with their computers. The question is, "is it yet physically possible to have an iPad be a single stand alone computer?"
    There are two basic uses for a computer, creating content, and consuming content. As a content creator, I find the iPad nearly useless. However, as a content consumer, I find the iPad (or any well designed tablet) to be the best device for consuming. Obviously, if you have multiple monitors or need in depth file management tools, the iPad isnt the right tool for the job. But what if the iPad IS the right tool for every job you want your computer to do? Is it physically possible to have just an iPad without another "real" computer to connect it to? Someone else already mentioned, by adding a simple case with integrated keyboard you have resolved the main issue with any content creation, the virtual keyboard reduces everyone to "hunt and peck" mode. Alternatively, you could connect a Bluetooth wireless full keyboard as well so you can type on your lap. First issue resolved.
    The biggest issue I see with having the iPad as your only computer is that it simply wasn't designed to be so. It was designed to be managed by syncing it to the main computer using a USB cable and iTunes as the management software. However, the reason the main question can even be asked is because eventually, once you've got the iPad set up the way you want it, and you've transferred your music (which largely lives on iCloud now for free with the advent of iTunes Match), and photos from the main computer (especially if you now use the iPad as your camera so no more transferring required), once you get to this point, you really don't need to connect to you computer any more. Or do you?
    For the email, music, pictures, games, and video chat crowd, once you've got the iPad set up the way you want it, do you ever NEED to connect it to a computer again? THATS the question. Plus, is the question (or the answer) different for the owners of different generations of iPads (or other tablets).
    My mother plays games, does email, browses, takes pics on a camera (iPad 0, no camera) and uploads them to various sites. Her Wintel machine is 15 YEARS OLD!!!!! She is an artistic person and hates the machine and all the boxes and wires.she loves the wireless iPad. Clearly, if she is going to continue to own a computer it's time to get a new one. It would be a MUCH more pleasant experience on a new computer, but she will still need to got to the computer to use it, and still have to look at the modem, router, and accompanying wires. Question, can she use the iPad wirelessly in the living room, using the HD flat screen TV as the monitor, the virtual keyboard or Bluetooth keyboard and the iPads touch screen for the mouse and NOT buy a new computer? The question isn't "is this the right thing for her?" It absolutely is. The question is, can the iPod successfully survive without being synced to a main computer ever again?"
    The only reason this is even a question is because the iPad was never designed to do this. It may have been envisioned as being able to do this one day, that may well be its ultimate function, but as yet, it has not been designed to survive without the occasional syncing to a main computer. Keeping in mind the iPad is really just an iPhone without the phone. Even iPhone, until the current release of iPhone 5 was meant to sync to a computer. My understanding is that the new 5 can in fact live successfully without syncing to a computer - the market wanted it so Apple delivered. So, can the iPad currently do the same or is there still a generation or two to go before it gets there? Especially the iPad 0. Are there things that it simply needs to be synced to the computer for that would hamper its function as a stand alone device? I don't know. What I do know is that it was designed as a side car, as a piggyback unit, as an extension of your main computer to give you a consumption option other than sitting at that desk in that folded up shape.
    My mother is asking, and I am investigating. It seems like it should be able to survive to on its own, without another computer, but it wasn't designed for that so I am loathe to tell her yet that it is OK.
    Anyone got any absolute knowledge one way or another, or resources that can be used to get a definitive answer?
    Thanks.

Maybe you are looking for

  • Error when using OC4J Datasource

    Hi, A customer is using a Servlet to run in an OC4j instance and is using EJB's for data DML. To work around the possibility that XMLTypes are not supported we do an update in the DoPost. public void ejbPostCreate(String mediumnummer, String inzender

  • My iPhone 4S won't charge

    Not sure what has happened, but my iPhone 4S will not charge. I've tried 4 different cables. I've tried charging via the wall, my mac mini, macbook air, and iMac. My iPhone 4 and iPad charge with these exact cables no problem. When I plug my iphone 4

  • Reports Help

    Hello, I have 2 queries in my report: ============================= Query 1: select distinct ph.security_cusip as SECURITY_CUSIP, i.sname as SHORT_NAME from issuer i, portfolio_holding ph, where ph.security_cusip in ('000361AG0000', '00037CHW3000') a

  • Window will not maximize

    I'm running CC 2014 and the window will not maximize. I even try manually enlarging the window, but Indesign snaps the window size back down to the smaller size. FYI... I just updated to the latest version of CC2014, and the issue is still present.

  • Business components : unable to find referenced object

    Hi, i work on Jdev Studio Edition Version 11.1.1.1.0. I often have this message in the message-log window : Business Components: Unable to find referenced object Object: easyges.monActivite.mesInfos.MonSuperieur. Owner: easyges.crah.AppModuleCRAH BC