Can the 'preventing widows and orphans' option be turned off?

Can I turn off the 'preventing widows and orphans' option and not use it on my document?

In Pages 5 (we assume):
Format > Text > More > uncheck the options
It is a paragraph attribute so you need to select the text you want to apply it to.
Then resave the styles that apply to that text.
Peter

Similar Messages

  • My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

    My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

    I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.

  • Lenovo Y50 - Can the SSD part of Hybrid Drive be turned off?

    I have a Y50 with a 1TB HDD + 8GB SSD Hybrid drive.I have heard and sometimes experienced in some games that the SSD part of the drive sometimes act as a hindrance to smooth perfomance.Can anyone tell me on a way to turn the SSD part off?

    None of these replies addressed the reason for my original question.
    I do appreciate the answers however I see I should have been a bit more thorough in my query.
    I know how the fusion works.  I know you can get a 1 tb ssd with the imac.
    I also know that it is very very expensive to get a pure pcie 1 tb ssd as an option.
    The reason for my question is to see if the sata ssd which is a little slower and also much much cheaper than pcie flash ssds can be used instead of the slow
    hdd in the fusion configuration.  I have ordered the 512 gb pcie flash for my imac so I am committed to pure ssd.  I would still like to know if
    what I mentioned is possible as a much less expensive option.
    Sorry for the confusion but in a rather lengthy search throughout the net and asking Apple's Geniuses I have been as yet unable to get any answer.
    It would seem to me that using a sata ssd instead of a sata hdd would be nothing but beneficial in the fusion setup.

  • When i plug my Ipod touch 4th generation in it goes to the apple screen and then it will turn off and then back on to a solid blue screen.

    When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • What do you do when you turn  ipod touch on and the apple apears and stays  on  wont turn off

    what  do  you do  when you turn  your  ipod touch on  and  just  the apple appears  wont shut off

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Where's the Digital Clock and how do you turn off 4G to go to 3G?

    Ok, just did the update and so far so good... exccept for two things.
    1) I had a digital clock on my home page prior to the update. After the update, it's gone and I can't find a widget for it. There's one for the anaolg clock but seriously, who wants an analog clock? Is there a way to get the old one back or do I need to find an app for a digital clock. I tried running some digital clock apps when I first got the RAZR but none of them worked.
    2) My phone, prior to the update, was left in 3G mode 90% of the time to conserve battery life. Now that the update is done, it's been in 4G mode all day and I can't find a way to revert it back. I have now had to recharge my RAZR after basic usage that I would do in 3g mode that would've left the battery with plenty of charge. Please tell me there's someway to get it back into 3G mode.
    Thanks in advance!

    You can use this Free app to help ya do the switch between 3G and 4G.
    https://play.google.com/store/apps/details?id=net.andirc.lteonfoff
    Thanks to b33!

  • My phone wont exit the settings screen and wont lock or turn off

    phone stuck on settings menu wont exit also it wont lock on its own or with lock button wont exit with home button either

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use the phone again

  • Frequently the earphone and microphone doesn't work and I have to turn off in order to work, it ocurr  whit skype and the ipod function, what I have to do?

    Frecuently the earphone and the microphone doesn't work, specially with skype and the music (ipod), and I have torestart (turn off) my Ipad !.
    What I have to do?
    Thanks in advance for your support.

    Have you reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen? If that doesn't resolve this, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will not lose any data, but all device settings will have to be entered again.
    If that doesn't fix it, your next step might be to backup then erase all content and settings or restore the iPad to factory settings. See how if goes if you reset all settings first.

  • I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

    I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

    I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..

  • In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

    In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4.  Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

    To: ~graffiti
    (This email is not intended to go on public forum -- but I wanted to respond
    to you)
    Thanks for your reply....FYI...I was trying to download from www.adobe.com on
    the specific page that has downloads of your products.    As far as the
    alternate source is concerned I am not totally sure what the capabilities it has as
    I am recovering from a hospital stay and had to send my wife to retailer to
    pick this up because I am accessing email from home until I return to work and
    need something to work now.  I don't yet have the SW.  (I would have had her
    buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
    Regards,
    Staurt Rednor ("Stu") - [email protected]
    ===========================================================
    Subj:   New message: "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader"   
    Date:   4/5/2009 7:38:17 PM Eastern Daylight Time  
    From:   [email protected]   
    Reply-to:   [email protected] 
    To: [email protected]  
    Sent from the Internet (Details)   
    SGuitar43,
    A new message was posted in the thread "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader":
    http://forums.adobe.com/message/1867664#1867664
    Author  : ~graffiti
    Profile : http://forums.adobe.com/people/~graffiti
    Message:

  • My IPAD (original version) is deleting everything over 30 days from my calendar.  How can I prevent this and how can I get the deleted events back?

    My IPAD (original version) is deleting everything over 30 days from my calendar.  How can I prevent this and how can I get back the deleted events? 

    You are most welcome

  • How can I Hide(not Disable) the Save As and Exit options in the File menu of Excel Documents in SharePoint 2013?

    Hi,
    I want to hide(not disable) the "Save As" and "Exit" options in the File Menu of Excel Documents in SharePoint 2013.When I make changes in the excelribbon.css file of xlviewer.aspx,all the options under File menu are getting hidden but
    I want to hide only these two options while retaining the others.
    Kindly suggest me a method to achieve this.
    Looking forward to your reply at the earliest.
    Thanks in advance.
    Regards,
    Sanjana

    Hi Sanjana,
    To hide the “Save As” and “Exit” options in xlviewer.aspx page in SharePoint, I recommend to use the code below(however it is not recommended):
    <style>
    div.cui-menusection li.cui-menusection-items:nth-child(2)
    display:none !important;
    div#m_excelWebRenderer_ewaCtl_menuJewelSaveAs{
    display:none !important;
    div#m_excelWebRenderer_ewaCtl_msJewelSecondary{
    display:none !important;
    </style>
    As “:nth-child()” selector is supported in IE 9 and later versions, please use IE 9 or later versions’ IE browser.
    http://www.w3schools.com/cssref/sel_nth-child.asp
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • I accidently click for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen?

    I accidently clicked for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen without access to view options?

    Co-el, This wasn't possible as there wasn't a navigation bar available. The F11 did the trick though. Thanks for adding to the discussion.

  • If you log out of your apple ID on your iPad and let someone else use it and they use facetime.  How come it shows my facetime history and not theirs?   I do not want them to have access to my history.  How can I prevent that and they can see their own?

    If you log out of your apple ID on your iPAD mini and let someone else use it and they use facetime.  How come it shows my facetime history and not theirs?   I do not want them to have access to my history.  How can I prevent that and they can see their own?  Or is the history associated with the iPAD mini itself and not the actual icloud user account?

    You are logging out from
    Settings -> FaceTime, right?
    My guess would be though, that the FaceTime history is stored locally on the device, so anyone using it will see the entire device history (I cannot imagine that FaceTime uploads the history to an Apple server anywhere - I'm sure it is just logged locally on the device - based on my iPhone and iPad show completely different histories, for example).

  • Can't get Dolby and DTS options to work

    Hi!
    Could anyone help me with my new Sound Blaster Z soundcard. I can't get Dolby and DTS options to work with my optical cabel under Cinematic tab in Pro Studio. I've googled enough, tried basically everything. Cinematic tab was never greyed out from the beginning. It either gave me intense, very high pitch noice when you acticated Dolby or DTS options or now... giving error which states:
    "The SPDIF-out (Sound Blaster Z) device is currently being used by another application. Please close any application that may be playing audio to this device and try again."
    I've re-installed drivers numerous times, tried different Windows operating system (7 and 8.1). Speakers (Sound Blaster Z) is made as default device, other stuff is disabled. I seriously don't know what to do, I'm god **** frustrated, because apart from Cinematic tab not working the sound isn't that great compared to my integrated motherboard soundchip.
    // If it matters my speakers are Edifier S530D

    Hi Kimbie,
    Are you able to play back mp3 audio tracks?
    I'm suspecting you are trying to play back encoded content.
    Do share more details here so that I can assist you further.
    Cheers,
    Colin-CL

Maybe you are looking for

  • Error message while changing the delimit date of a job in ppome

    Hi experts, I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2

  • [SOLVED] Java causing startup issues

    Recently I tried to install intellij and since than have had a bunch of Java issues.  After uninstalling intellij and java (since it required jdk and I already had openjdk installed), then reinstalling openjdk the both the mysql and dropbox daemon fa

  • Can't change names of files in Finder after Leopard upgrade

    OK, I'm sure this is an easy fix, but I haven't found this precise situation looking around. Hopefully someone can point me to exactly the right utility. I had Tiger, then upgraded to Leopard, then had some of the problems reported elsewhere on this

  • Data source jndi name

    Hi I know that is possible to set a data-source as a reference resource in a web.xml file, and reffer to it as "java:comp/env/xxx". But the question is this: is it possible to do it in the same manner as it can be done under jboss , meaning: do not p

  • Export date from abap into sel sever

    hello i tried to write to sql server from report of abap. i want to write to field that define in sql server in format datetime. how i define in abap this field that i can insert to this field time and date? i tried to define in this field in abap li