Can the RV180W have multiple SSIDs with different security configurations?

I am trying to configure the RV180W with a guest network and regular wireless network. The regular wireless network is just a bridge to the wired network, using WPA2-Pers for authentication. I built and enabled another wireless SSID, using a different VLAN and no authentication. I can get both SSIDs to function at the same time if I turn off security. Once I turn on Security, the regular one no longer functions.

It is actually all in the manual:
SEE: PDF MANUAL
Page 63 of PDF and onwards
Do note that you need to assign multiple VLAN per SSID. Check the manual it is there :D
and based on the manual you need to enable multiple VLAN support: See page 34 of the manual: Configuring Virtual LAN (VLAN) Membership
Don't forget to rate and mark as answer helpful posts! :)

Similar Messages

  • Running the same code multiple times with different paramters automatica​lly

    Hi guys,
    I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
    X_Intial, X_Final, X-StepSize
    Y_Intial, Y_Final, Y-StepSize
       Thanks,
    Dushyant

    All you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
    Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
    Attachments:
    Cluster Array.JPG ‏9 KB

  • Multiple SSID with different Login Web authority pages

    Our current setup is one Anchor control and then several WLC’s, I want to know if I can have multiple SSID and use different Web Auth pages form them, so I can have a SSID that requires a password to Authentication access and another SSID that requires pass through Authentication but they would have different web authentication pages and go to different pages once Authenticated.
    Is this possible to ?

    Hi,
    If  you are running WLC software 4.2 and above then u can do this on per  WLAN basis.. here is the link which tells on how to do it..
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml#A1
    Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • In my household we have multiple users with different apple id's on one computer. Can we just change the login to sync our devices to the computer?

    We have multiple apple id's for each member of the family and we all use one computer. Will this cause problems when we all want to sync to the computer, after we authorize each apple id to the computer?

    Each user should have a separate user account on the computer. That will result in each user having a unique iTunes library and as long as each person logs into the computer with their own account, it will avoid unintentional cross synching and deletion of data.

  • Can I have 2 routers with different security and broadcast modes off same modem?

    Hi
    Apologies for not being too technical.  The background is that I have a mac and a dell laptop, both of which used to work off a Linksys WRT54G wireless router even though both computers are set up for N routers.  I then bought a Logitech Squeezebox internet radio, again working off the Linksys G.  The security on all 3 was WEP.
    I was then advised to upgrade my router to N and change security to WPA.  I bought a Netgear WNR2000 N wireless router as the local shop did not have any linksys n routers.  I tried to set up the three devices to this router but it seems that the radio will only broadcast G and WEP security.
    It then appeared that I would have to downgrade the other two computers back to G and WEP also and when I did that the internet speed really slowed down.
    My query is this, can I set up the Netgear N to be linked to my modem and broadcasting at N and WPA, thus linking my computers at top speed, and then can I link my Linksys to my Netgear and have that broadcast a different network on G/WEP for my radio?  If I can or if there is a better solution could someone tell me in easy steps how to do it?
    Very much obliged.

    You don't have to downgrade your router. Just enable mixed mode so it will allow wireless N and G devices to connect to the router. However, it will share the same wireless security mode.
    With regards to your query, the answer is yes. You can setup two (2) wireless routers, one providing N and WPA while the other one providing G and WEP. It might be a little complicated though. You have to cascade the routers. Both should have different SSID and channel.
    Try this setup first before changing the wireless options.

  • Can a family have multiple iClouds, with 1 iTunes acct?

    We are a family of 4 apple users. I want us to share the same iTunes acct with one way to purchase items, but I want us each to have our own iCloud login for backing up our devices. How can this be done? 
    Also, would we be able to access or see each others i

    Yes, in fact it's recommended that you have separate iCloud accounts.  You can have separate iCloud accounts and still share the same iTunes ID; it does not need to be the same as the ID used for iCloud.
    To create separate iCloud accounts, each person should go to Settings>iCloud on their iOS device and sign in with a separate ID to create their account.  If they have multiple devices, then can create the account on one device, then go to Settings>iCloud and sign in with the same ID on their other devices.

  • I have multiple computers with different itunes libraries, I dont want lion to share these libraries

    I am upgrading to lion,
    I have multiple laptops and ipads, however I want to keep my itune music libraries separate.

    Yes.  By enabling iTunes Match on each computer, each library will be scanned and the Songs will be Matched or Uploaded to the cloud.
    Do look carefully at the User Tips area of this forum to help you with the neatest route to success.

  • I have multiple computers with different id's on m...

    hello, i have skype on different computers (3-4) and each has its own id (login info)
    and when i am logged in and others in the house are, we dont see each other online. why?

    You can sync any number of iDevices to a single iTunes library - as I said in my earlier response, you can easily set up one or more playlists that are associated with each iDevice and configure sync behavior based on those.  What you can't do (in general) is sync one iDevice with more than one library.
    In simple terms, this is what you need to set up:

  • Multiple Orders with Different reasons on a Single day

    Hi,
    I am recently learning Device Management of IS-U Electricity. Now I have a problem with meter reading orders generated at the time of periodic meter reading with reason 01 and different system generated orders with reasons like 22, 21 , 16 and 11 which are the orders get created internally based on device replacement and modification.
    If the scheduled meter reading date lies on the day or the day before of device replacement or modification, the meter reading for the periodic order is getting prorated based on the meter reading entered at the time of replacement or modification. This is what I dont want.
    Is it possible to have multiple orders with different reasons on the same date? Any configuration changes are welcome.
    - Arghya

    Hi,
    You can acheive this using following config changes.
    SAP Utilities --> Device Managment -->Meter Reading --> Meter Reading Order -->Order Creation --> Define Automatic Interpolation for Meter Reading Reason.
    Uncheck  the 'Auto Interpolation' flag for Meter Reading reason 01.
    This will not use the Replacement or Modifiaction read.
    Let me know if anything more is reuiqred.
    Thanks and Regards,
    Ranjit Thakur.

  • Multiple profiles with different cache settings

    I want to have multiple profiles with different settings for the cache. I'll call them ProfileOne and ProfileTwo for simplicity's sake. ProfileOne I want to clear its cache on exiting Firefox and on ProfileTwo have it retain its own cache. I have already setup both profiles and configured them accordingly with ProfileOne's privacy settings for Clear History > Cache checked so it clears on exit and ProfileTwo is not set to clear anything on exiting.
    The main issue is that after doing something with ProfileTwo then switching to ProfileOne, upon exiting ProfileOne it also deletes ProfileTwo's cache. I have tried using the profile manager to create the profile in a different location than default to no avail. Is there any way to set it so ProfileOne's cache can still be cleared on exit without affecting ProfileTwo's cache?

    After checking a few different options, it looks like the add-on Better Privacy provides the options I need for LSO management and does separate HTML cookies from Flash cookies nicely and lets me save specific site's LSOs. Thanks for the assistance!

  • I have a question about the calendar on the ipad2. I have multiple calendars in different colors. Some of the events are filled in with color. Others are just listed with a colored dot in front of the event. Any ideas why events ar showing up differently?

    I have an ipad2 and my question is about the calendar. I set up multiple calendars with different colors. Some of the events show up in filled color. Others only show with a colored dot in front of the event. I can't figure out why some show up one way and others show up differently? Any thoughts?

    On mine the ones that show on a coloured background are all-day events, the ones with dots and just timed events.

  • How can I edit multiple clips with different frame rates on the same timeline

    how can I edit multiple clips with different frame rates on the same timeline

    You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
    Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
    You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
    The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
    Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
    Have fun.
    x

  • Can I Turn off iMessage in a group text with multiple people with different devices? There's 1 person in the group text that doesn't use iPhone anymore and they can't see any messages that are sent unless we send as regular text individually.

    Is there a way to turn off iMessage for a group text that includes multiple people with different non-apple devices? When a message is sent, only the iPhone users can see the iMessage. Those without them cannot see the texts unless we send individual Text Messages or turn off iMessage completely.

    now I have this and it still doesn't work.
    Section "ServerLayout"
    Identifier "Simple Layout"
    Screen "Screen 1" 0 0
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Touchpad" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"
    Option "OffTime" "1"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection

  • Can we have multiple Podcasts with the same Mac Account?

    Hi all,
    Can we have multiple Podcasts with the same Mac Account?
    For example, I have a single .MAC account and create a website with multiple Podcast pages...or within iWeb I create multiple sites, and each has a podcast.
    Is there a problem?
    Thks
    Leo

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Why can't I have 2 users with 2 different apple ID's on my iMac

    Just bought a new iMac, I have set up 2 user accounts, one for myself the other for my Fiance. We both have different apple ID's yet we can't both download our purchases. As he has already downloaded his old purchases on to the new Mac, when I try, it brings up the box saying that "this computer is already associated with another apple ID, therefore it can't be used with my ID for another 90 days"
    I have tried to get Apple Support to help me out but they just pushed me down the route of Home Share, this isn't working as the laptop with all the music on, isn't always turned on.
    Does anyone know how to solve my problem? Apple say that it can be done, yet 3 live chats, 2 phone calls and many hours later and I still can't access my purchased items, surely the iMac should be able to have multiple users with multiple apple ID's???
    Please help!!

    No, once the initial 90 days has passed, you should both be able to download. My husband and I share an iTunes library, and to the best of my knowledge, we do not have issues with both of us being able to download.
    I'll double-check it tonight when he gets home, but I'm fairly certain we are now both able to do it.
    I'll post back once I've tested it.
    Cheers,
    GB

Maybe you are looking for