Can the same I/Os be used for both scan mode and fpga mode

Hey guys,
I currently have this project where I want to have the same I/O in both the RT VI and FPGA VI.
(as in use a C series module on the RT VI and FPGA VI concurrently).
For the customer's sake, I want to keep using the scan mode for the ease of programming,
but I want to use the I/Os in the FPGA VI to implement a safe state.
Is this possible? Thanks.

Either scan mode or FPGA interface. You can't use both in one project.
Suggestion
Setup a safe mode project or double the target in one project.

Similar Messages

  • Why isn't ICoud sending a verification email to my email address if the same email address is used for both my ITunes and my ICloud accounts?

    I cannot get my music that was previously purchased through ITunes on another computer to play on my laptop because I donnot have ICloud to transfer all of my previousely purchased music. Icloud and Itunes has the excact same email address listed but I have not recieved a verification email at all. Does anyone know what I need to do?

    Hello Imuscella,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/ht5312
    You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. 
    Best of luck,
    Mario

  • Can the same Apple TV be used for two separate TVs?

    We just moved into a new house and need to know if our Apple TV can be used to stream content to the TV in the living room and the TV in the garage, or if we simply need to buy a second Apple TV.
    The TV in the living room and the TV in the garage are both wired to the same Denon two-zone receiver. The living room is where we watch all of our TV and listen to most of our music. But the garage doubles as a home gym, so I'd like to be able to either watch videos like P90X and Insanity -- they're all in my iTunes library now -- or listen to music while I exercise. Perhaps this is possible due to the two-zone capacity of the receiver.
    I don't need to be able to stream content to both places at the same time, by the way. This is just for the mornings when I want to work out. Right now, the Apple TV is connected to the back of the receiver in the GAME input and works beautifully in the living room. The TV in the garage is yet to be installed, although the wiring back to the original zone is already done. Again, all the speakers and wiring for both TVs will be in the same receiver.
    Is the Apple TV capable of doing what we need it to do, or do we need to get another one?

    I bet you are searching in the wrong forum for solution.
    Since you have a receiver, witch is able to transmit two different signals to two different TVs (just the matter of switch - i suppose?), than, the media being sent from Apple TV just has to be redirected to the 'right' TV witchever you use at that moment.
    Different story with the Audio. Dont know if you using the Speakers on the TV's or on separate Audio Systems.
    Cheers

  • I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.

    I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.  I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling.  Thanks.

    thanks.  your answer was correct, clearer.  I have another question, maybe you can answer.  I just purchase my ipad2 2 days ago.  yesterday, there was a sound.  today there is no sound.  there is a sound only in movies and you tube and music.  but no sound on all apps and keyboards.  I look it up and seems like ther are few that have this problem.  I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that.  I tried rebooting it and still won't work.  Should I just restore it?

  • HT201209 can the same gift card be used with a differencet itunes account?

    can the same gift card be used with a differencet itunes account?

    No, a gift card can only be redeemed onto one account - it can then only be used to buy items for that account (it can't be used to gift content to another account).

  • Can the USB NI DAQs be used for process control,eg.closed loop? or is too fast

    can the USB NI DAQs be used for process control,eg.closed loop? or is too fast.

    Hi mho,
                 1.usb is very high speed that is correct.Better you can choose PCI DAQ.But thats upto you.
                 2. see this:-
                 http://sine.ni.com/nips/cds/view/p/lang/en/nid/14136
                3.If Matlab support TCP/IP, that could be an option.
                   see Another idea: http://digital.ni.com/public.nsf/allkb/244A37667BD7CBCE86257520007F937B
                   Another simplest way to do it (assuming you running Windows) is to use a Matlab script.
                  If both programs running on different systems:-
    Most simple and slow - Create two  VI's  with shared variable on both machines, and use a matlab script to
    share data. (this makes matlab some kind of "slave").
    More advanced but still  relatively slow (Create two  VI's  with shared variable, on the Matlab machine build the .NET
    dll, and it can be used on Matlab too ( at least at 2010b version, earlier version support only COM).
    Create TCP/IP connection between two comps.
    There is "out of the box" NI products, that communicate with Simulink models.You please do a simple search on that...OK
    I think this link is also helpful for you:-
     Procedimiento para la interface entre LabView 2009 y Matlab 2009b.pdf 1128 KB
    Anyway All the best.Try....do it.
    Thanks as kudos only

  • Can the same Bank Key number be for different SWIFT codes?

    Can the same Bank Key number be for different SWIFT codes?

    hi
    once u have cancelled the challan this number will not be avaiable for the posting.
    when u repost a different number will be avaiable for the posting.
    hope this is clear assign some points.
    with regards
    Krishna Singareddy

  • I have one apple ID for my MAC and another used for both my iPhone and IPad.  Purchases from iTunes don't appear on either my iPhone or iPad only only the MAC. How do I sync the two IDs?

    I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad.  When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad.  Neither lets me change my ID so how do I fix this issue so I can play the music on all three?

    Hello chlanli
    You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Regards,
    -Norm G.

  • Can the PIXMA MG2220 also be used for documents?

    I recently purchased a Canon PIXMA MG2220. Can this model also be used for printing, scanning documents as well?

    Hello p_lainhart1952!  You have nothing to worry about!  The PIXMA MG2220 can print and scan both photos and documents.  We hope this information is useful to you!

  • HT5622 facetime not connecting to all devices that use the same apple id.  I have both an iphone and ipad.  Incomin facetime calls connect randomly to one or the other or both.  (should be coming to both)

    I have an iPad and an iPhone, both registered to same AppleID.  Incoming Face time calls ring randomly on one or the other or both (and sometimes none). They should ring on both.

    check the 'recieve at' addresses you set in settings, facetime.  you can have multiple addresses. 
    On mine, i have thre addresses set the same.  I am using both a phone # and my e mail address  (neither one is my apple ID, by the way).
    If somebody calls me to FT using the phone #, the phone rings first, followed by the pad, about 10 sec later.  If they call using the e mail address, they both ring at about the same time.  If one or the other answers, the other device stops ringing. 
    So next time a call comes, wait a bit before answering to see if the other device responds.  and check your receive at addresses.  
    You might want to test a little - have somebody call using one address, or the other, and see if you can track the behavior.

  • Infosource to be used for both Direct update and Flexiable update

    Hi,
      I had a Data source 0CUST_SALES_ATTR.
      A infosource is created Direct Update of Master Data from DS:0CUST_SALES_ATTR to 0cust_sales.
    So the Data source 0CUST_SALES_ATTR is being used to load ATTR data of 0CUST_SALES.
    Now as per my requirment created a new Z infoobject to use for Transtive attributes....How can i use the same data source 0CUST_SALES_ATTR to load 0CUST_SALES (Direct Update) and the new Z infoobject using Transfer & Update rules.
    and
    Question:
    Will it be possible to switch the current Infosource with direct update to Flexiable update with out deleting the Transferrules as there are lot of routines in the transfer rules
    Thanks
    Edited by: suser1234 on Oct 5, 2010 11:21 AM

    Hello Sir,
    How did you handle your above problem I am into a compeltely similar situation. Your help would be appreciated if you can share the approach you followed.
    Thanks,
    -Su

  • HT4436 I have an existing Apple ID that I use for my IPOD Touch.  I just received an Iphone 4S to replace my existing Blackberry that broke.  Can I set up a new ID for my work phone, but still use the same laptop that I use for my Ipod Touch?

    I have an existing Apple ID for my Ipod touch being used via my laptop.  I just received an Iphone 4S as a replacement for my Blackberry Curve that broke, that goes through Verizon.  Do I set up a separate Apple ID for the phone, and will it work with the same laptop? Can one computer work with two ID's and two different devices?

    No need to create a New Apple ID... your Existing one will work fine...
    Apple ID FAQ  >  http://support.apple.com/kb/HE37

  • How to create a file which i can attach to an email using the same print routine i use for printing

    Hi all,
    In my current code i print a document.
    What I would like to do is attach this file - possibly as a pdf - to an email using the same print routine ( with some additional code obviously)
    Did some research on the web and can't find a solution to this.
    Any help would be appreciated.
    Regards
    Jan Konijnenberg

    What I would like to do is attach this file - possibly as a pdf - to an email using the same print routine ( with some additional code obviously)
    You need to install a printer that 'prints' to a PDF file.  Then send your document to that printer and attach the file.  There are several available, free and commercial.
    http://www.dopdf.com/
    There are other formats which may be suitable.
    http://www.howtogeek.com/150891/how-to-print-to-pdf-in-windows-4-tips-and-tricks/

  • HT1918 iTunes store says I can not use my credit card for the store although it's the same card I've used for years

    The itunes store says "this card cannot be used with the iTunes store. Please use another payment method". It's the same card I've always used, it's valid, up to date, and in good standing, and works everywhere else. What' up with this? I don't want to use a different card.

    You can contact iTunes support via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Airport Utility won't accept password, though it's the same that I'm using for my wi-fi access.

    Hello,
    First-time asker, multi-time reader. Could not find this situation exactly in other posts.
    I’m having trouble accessing two different Airports.
    I have an Apple Airport Extreme 802.11n (4th generation) handling the wi-fi for 3 laptops and 2 iPhones, but I needed to extend the range within the home one room so I got a Airport Express.
    It’s showing up in the Airport Utility when I try to set it up, but each time I try it asks me to “enter the password for the selected airport wireless device.”
    I type in the password I use when I need to access the wifi (the “WEP” password I guess?), but it’s never accepted. I’ve tried this on 3 of the Macs.
    After reading some relevant comments here, I confirmed this as the “Airport network password” with the Keychain on 2 Macs. My Keychain does not show a “Base station password” at all.
    I typed it in on 3 different keyboards, no caps lock, etc.
    I’ve tied adding “$” and using “public,” to no avail.
    I’m assuming that the password it’s asking for is the same password same as WEP password, the one that’s used when a friend visits and wants to use my wi-fi instead of 3G. It’s my network password. Is that right? Or is there some other password needed? My Keychain does not show a “Base station password” at all.
    It does this for the existing Extreme as well as the Express.
    It asks for the password whether I try to update the firmware as directed (7.4.2 to 7.6.1 for the Express, 7.5.1 to 7.6.1 for the Extreme), or if I click “Manual” to set up the Express.
    Same thing happens using the Apple Airport Utility App on my iPhone.
    I did the factory res-et thing on the Express, and it showed up with a generic name described as “with factory-default settings” so then I clicked Continue. This brought up the box saying “Are you sure you want to switch wireless networks? Setting up this AirPort wireless device requires switching wireless networks. Switching wireless networks may interrupt your connection to the Internet.”
    I don’t want to switch, I want to add the Express to the existing Extreme network, so I’m (ignorantly) hesitant to say yes. Besides, it will probably just ask for a password, so I’m back to square one.
    I’m mainly working on a Second Gen MacBookAir (3,2), Intel Core 2 Duo with AirPort Extreme  (0x14E4, 0xD1), Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.42.4) 802.11 a/b/g/n. But this situation is the same on multiple Macs and iPhones.
    All my devices work fine on w-fi, but none can access the Airports using the password as mentioned above with the goal of updating firmware and setting up the Express.
    So anyone have any suggestions for this issue the password problem?
    Just Wonderin.
    Thanks so much.

    Jaime...
    Open Keychain Access   /Applications/Utilities
    Select Passwords on the left.
    type    base station   in the search field top right corner of the window.
    Right or control click the base station keychain then click Get Info
    Select the Attributes tab.
    Click: Show Password
    Now, you can use that password or set up one of your own. If you want to create a new password right or control click the current base station keychain then click Delete.
    Now open Airport Utility  /Applications/Utilities
    Select the base station on the left.
    Click Manual Setup then select AirPort from the menu then select the Wireless tab
    Type in a new password, then type it in again to verify.
    Then select:  Remember this password in my keychain
    Then click Update.
    If at some point you forget the password for your wireless network just follow the instructions for Keychain Access above.

Maybe you are looking for