Can the Start conditions editor of a Standard WF be changed

Can the Start conditions editor of a Standard WF be changed and transported to Production?
Please suggest
Edited by: kittu reddy on Dec 12, 2008 2:15 PM

HI,
Yes you can do that. You can deactivate the start conditions and transport it.
I think you are working on SRM workflows. Below are few links which might be useful to you.
[http://help.sap.com/saphelp_srm50/helpdata/en/ee/277e3c281f1817e10000000a114084/content.htm]
[http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/content.htm]
Regards,
Raj

Similar Messages

Can we change the start conditions of SAP standard workflows

Can we change the start conditions of SAP standard WF10400002
Where i want to assign my own Gross amount in the start conditions.

Check out the link below.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/90/83ed38f5f41a28e10000000a114084/content.htm]
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/4c/86bf43feca11d2a64f0060087a79ea/content.htm]
Regards,
Raj

Z field in the start conditions of a workflow

Hi all,
Is it possible to add a z field in the start conditions of a workflow?
My requirement is to use a z field created in the shopping cart, in the start conditions for the workflow WS14000044.
Thanks and regards
Kishan

Yes you can undo the delegation at any point of time not to worry. It is just atable entry.
Go to swo1->Settings->Delegates
If you want to use a Custom Business object that is a delegate of a Standard Business Bo you can use it. You create a Virtual attribute in your custom Business Object. If you delegate the Custom bo with Standard BO. Whenever you refer to standard Business Object you will have this Custom attribute in your kitty. This will help in start Condition.
<b>Reward points if useful</b>

Process an action even if the start condition is no longer fulfilled?

System: SAP CRM 5.0
Background
Using an action in the action profile we want to be able to send a reminder to the person responsible for a service transaction at a specific date. The person responsible should himself be able to maintain the date at which he should receive the reminder. Therefore we have added a new date type, zreminder_date, in the date profile where it is possible to manually enter the date at which the reminder should be sent.
The actions are processed using a selection report which is run in a batch-job each night. The action has a start condition: zreminder_date = Todays Date, i.e. the reminder should be sent when the reminder date equals todays date.
Problem
As long as the batch-job is run each day we have not encountered any problems. However, if for any reason the batch-job is cancelled and can only be run the next day we dont know how to process actions where the start condition is no longer fulfilled. Can we for example force actions for specific dates to be processed afterwards?

Hi Lisa,
Actually My requirement is also similar to your process.
I have to send a reminder mail to particular manager one month before contract end date.
For ex: Contract start date: toda's date,
Contract end date : startdate+12 months
reminder date: one month befroe end date.
so I have to send reminder mail.
My problem is I don't know how to set the process in background.
I have takn the condition : reminder date= Today's date.
For time being I have tested the similar scenarion :
start date: toda's date
end date : start date+2 days.
reminder date: end date- one day
that means If I create the contract today ,my mail should trigger tomorrow.
But I couldn't send the mail .
please help me how to put this process in background .
My id is: [email protected]
Thanks

How to find the start condition of a ABAP program?

Hello Gurus!,
Could any one please explain how to find the start condition of a ABAP program?
like its a event based or time based?and also how to find that event and time..
Thanks in Advance...
Dinakar

Hi Dinkar,
Go to Job Schedule, put Job Step parameter as your program and see scheduled Job.
In Schedule Job double click to see start condition. and steps to see details and variant.
Hope it helps.
Thanks
CK

Error using a method call in the starting conditions of a Workflow

Hi,
In SRM 4, I have a doubt about a start condition with WFWS14000109 I need to trigger the WF depending on organizational unit of the requester (not purchase group or purchase organization).
I have seen in the editor, in SWB_COND in the part of requisitionerUser the Method ReadOrgUnit.
I change to traditional mode of the editor and when I select the method I get in Express1. field
&_EVT_OBJECT.REQUISITIONERUSER.READORGUNIT(_RESULT='OBEG';ACTORGUNIT= )&
If I use = and the organizational unit in express2 field I get error
Partial expression expected (expression '&_EVT_OBJECT_REQUISITIONERUSER.READORGUNIT(_RESULT',position 76)
Can anybody say me where is the error? how I should express the condition.
Thanks
Best Regards

I don't think you can use a BOR method in a condition. At least not as far as I know. I think it would be better to create a virtual attribute in your delegated subtype of BUS2121 and use that in the condition.
Regards,
Martin

Can the Starter Edition open a Camera Raw file?

...might be asking a lot, but does anyone know the full list of file formats that the Starter Editon can open?

Starter Edition can show JPG, TIF and BMP image files along with MOV, AVI, MPG and 3GP (mobile) video files.
Camera raw are supported by Photoshop Elements and not by Starter Edition.
Comparision of Starter Edition and Photoshop Elements is listed at
http://www.adobe.com/products/photoshopalbum/startercompare.html
Let me know if this info helped you.

Can the default image for a password protected album be changed?

Apologies in advance if this question has already been asked. I have created a number of photo albums to my web gallery and password protected each of them. When I navigate to the main web gallery page however, each of the galleries appear as a black and white graphic of two photos. Is there any way to change this to something else?
Also, is there a way to send out an invitation to view the gallery as a whole and therefore let people view the albums they want? I just really love the invite card that is created when the album is published from iPhoto.
Many thanks in advance.
The Duffer

@Sean wrote:
Hello,
Can the default location for mailboxes be moved and still function?what do you mean? do you mean the default location where mail stores its data on the hard drive or do you mean the position of mailboxes in Mail interface?
Thank you,
Sean

Can the adobe reader mobile app open standard password protected AES256 encrypted files (not Livecycle) made by Acrobat XI?

I downloaded the adobe mobile reader for iOS just now and tried opening a pdf file created by Acrobat XI and optimized (no errors reported) for web and mobile devices the file was password encrypted (*not livecycle*) using 256AES, compatibility acrobat X with restrictions allow: none, printing allowed low rez.
when acrobat mobile reader launched the pdf it required a password and even with the correct password used for changing security settings failed to open.
how can people secure pdf's from unauthorized editing their work in Acrobat XI using (Acrobat X compatibility), standard password protection using AES256 bit encryption and open using the adobe mobile reader app ?

I actually need at least three people to successfully open my free pdf using the Adobe Free acrobat viewer for mobile devices or my client want to remove the access for mobile devices link.
Can anyone test please the free pdf that it opens on iOS or Android ?
the guest checkout is enabled just need to put shipping info to access the Download File 2
The wordpress link is below image
mahalo in advance
Source Supreme pdfSource Supreme

HT201363 Forget the restriction pass code, can the apple store send to me to reopen and change the code?

Can apple store help me to send back the old pass code, then I can change to a new one for safety!
Thanks!

Hello KKchristks,
It sounds like you need to reset your Restrictions passcode. According to the following article, you will need to restore your iPhone as a new device:
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/ht4213
If you lose or forget your Restrictions passcode, you will need to perform a factory restore to remove it.
If you are not referring to a Restictions passcode, would you elaborate on the passcode you are attempting to reset?
Thank you for using Apple Support Communities.
Regards,
Sterling

Can the names of bookmark folders in Mozilla Firefox be changed?

Changing the name of Bookmark Folders

If you have a problem then it's probably because you are running an old version of FF. I recommend installing the current version [http://www.mozilla.com/en-US/firefox/firefox.html Here]

Start conditions not copied when copying the standard WF

Hi
I have to copy the standard WF WS10400002 into a custom one having same start conditions
but only with an additional step.
but the start conditions are not copied on doing so.
and when trying to create the start conditions similar to the original one
i dont find the container element Gross Amount(USD) in the copied one
How can i resolve my issue , what else do i need to take care when copying the standard WF.
Please suggest.
Thanks in advance

Hi Raj
The start condition defined in the std WF is
Gross amount(USD) < 9,999.00
and the in the container varaibles that i can see while defining the start conditions there are two varaibles for gross amount
they are
->EC Confirmation goods
   ->Gross amount              Gross Confirmation Amount in Document Currency
->Gross amount(USD)       Gross Confirmation Amount in Document Currency (Currency:USD).
and the BO BUS2203 has only Gross amount in the below format
ProcConfirmationEC.GrossAmount   Gross Confirmation Amount in Document Currency
The std BO doesnt have Gross amount(USD)
Copied WF
In the container variables i can see only
->EC Confirmation goods
   ->Gross amount              Gross Confirmation Amount in Document Currency
So i dont have the variable Gross amount(USD) to use it as in the std WF.
Please suggest.

CcBPM - can't activate workflow when using expression in Condition editor

Hi,
My workflow (generated by ccBPM) won't be activated when I try to do an IDOC comparison (on DOCNUM), using an index (count), in the ccBPM Condition Editor.
The condition looks like this:
(msgs_receive[count]./HRTRPR01/IDOC/EDI_DC40/DOCNUM = msg_receive./HRTRPR01/IDOC/EDI_DC40/DOCNUM)
There seem to be no errors when activating the Integration Process in the Integration Repository, however when looking into the SXI_CACHE, XI Directory cache, my integration process gets return code '99', even after reactivation.
I get this error:
Syntax error in expression Line1 Ext. IDE63443806B4211DBC393F1DE0ACE61FE
The exception occurred (program: CL_SAI_SWF_RULE
Symbol 'CE/KO' expected at position 1 in expression 'count{XSDSIMPLE::xsd:string;}'
The only interpretation I make out of this is that it doesn't like my index (count) variable.
Can anything be done to fix this?
I use XI 3.0 SP14
Thanks
Olof Trönnberg

Hi,
Return code - 99
1) Export parameter might be wrong.
2) Check Oss Notes 901366 & 708338.
3) 99 occurs when there is a mismatch in the mapping
4) 99 occur if all the active correlations are not used.
5) Try this SXI_CACHE select your business process and
click on activate. change the the return code to 02
and upon activating again.
This will help you :
http://help.sap.com/saphelp_bw31/helpdata/en/c6/893bca449311d1893e0000e8323c4f/content.htm
Regards
Agasthuri Doss

SAP Workflow not triggering due to "Start Condition return FALSE" message in SWEL

Hi,
I have SES approval workflow which is not triggering in few cases because of check function ends with exception even it has valid start condition and correct data. For example lets say we have PO no. 100 for which 3 SES (SES1,SES2 & SES3) are created. Out of which workflow for SES3 is not triggering even if all the three contain valid start condition(Bases on internal order at PO line item).when triggering workflow manually using SWUE for SES3 it work fine.Please find SWEL screenshot below and let me know if you have come across this type of issue.
Thanks in Advance.
Ishant.

kindly use SAP_WAPI_CREATE_EVENT and not SWE_EVENT_CREATE it's always better to use APIs.
Why use 2 sub-objects? you already have a z-object and you can modify it. even if there is a reason for the double sub object , the workflow should still run on the standard one - BUS2091.
see for example :
Extending Object Types: Inheritance and Delegation - SAP Business Workflow - SAP Library
As for your question,
if you are using a function module to raise the event, way not check in it if the service entry sheet has been created properly before creating the event. you can even check if the PO contains an internal order in your RFC function module and raise a specific event. then you will have no need for the starting condition.

Action with start condition always triggers

Functionality required: "when its 4 days from the actual date an
Audit is to take place an e-mail should be triggered to the
audit attendees"
I have created a new date rule (4 days before - reminder) and
added this date rule to the date profile 000000000003. I am
using this date profile in my actions and have set a new start
condition to trigger an e-mail alert when "todays date" = my new
date rule. I have set up scheduled conditions which are met.
when i create transactions which meet both the scheduled and
start conditions (from my perspective) the action is getting
triggered to send the e-mail reminder. My new date rule is as
follows:
<?xml version="1.0"?>
<TimeRule>
   <TimeRuleSource>
      <ruleline>
         <AssignTimeExp displaytype="AssignTime">
            <VarTimeExp displayType="VarTime"
                               name="RESULT"
                           position='B'>
              <VarObjectExp displaytype="VarObject"
                                name="SYSTEM"/>
            </VarTimeExp>
            <MoveTimeExp displaytype="MoveTime" direction="-">
               <VarTimeExp displayType="VarTime"
                                  name="ORDERACTUAL"
                                  position="B">
                 <VarObjectExp displaytype="VarObject"
                                name="SYSTEM"/>
               </VarTimeExp>
               <ConstDuraExp displaytype="ConstDura"
                                duration="4" timeunit="DAY">
                  <VarObjectExp displaytype="VarObject"
                                name="SYSTEM"/>
               </ConstDuraExp>
            </MoveTimeExp>
         </AssignTimeExp>
      </ruleline>
   </TimeRuleSource>
When i test it using various dates it seems to work as expected, it returms false when it should fail and true when it should suceed When tested from within the date rule for the FROM and TO date for todays dates i get the following:
Deadlines
Appointment Type RESULT
From SA 10.02.2007 14:27:52 GMTUK
From
Appointment Type ORDERACTUAL
From WE 14.02.2007 14:27:52
To WE 14.02.2007 14:27:52
Duration
Reference Objects
SYSTEM GMTUK CL_TIMECALENDAR_SIMPLE
In my start condition i am testing for my date rule (4 days
before - reminder) = todays date.
Can anyone explain why my start condition is always being triggered
Thanks in advance
Ed

Hello Easwar Ram,
Thanks for your reply.
No, I didn't create an Action Profile. I use standard profile: /SCWM/TU (Shipping & Receiving - Transportation Unit).
I only have created a new Action Definition, Schedule and Start Conditions for this Definition. All work correctly with the exception of the button 'Start Condition Parameter'.
I don't know why the button appears because I didn't define a Condition Parameter for the Start Condition. And when I click on this button I get an error in standard SAP code:
1) li_bor_object ?= l_context->appl.
2) ls_bor_handle = li_bor_object->get_bor_object( ip_objtype = l_objtype ).
L_context->appl has value '' in the debugger. After line 1 the value of the li_bor_object is '' therefore line 2 terminates the transaction with error.
Maybe this occurs because the Action Profile uses a Persistent Class for Object Type instead of a Business Object Repository?

Can the Start conditions editor of a Standard WF be changed

Similar Messages

Maybe you are looking for