Can the sync server use for sync the custom database?

Hi,
I review some document from OCS. Sync server (mobile data sync) will connect to the calendar server to sync data. Anyway, if I would like to sync custom data, not with calendar server, is it possible? If so, how? (Can I connect mobile data sync server to the oracle database directly without calendar server?)
Further question, if the database contain binary large object (files), can I sync just only attribute of the file (for example if the name of the file is changed.)
Thanks,
Byrd

Sorry. No this is not something that is supported.

Similar Messages

  • Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

    Hi
    In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
    But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
    Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
    There is only one Job Server and the destinations are enabled in it
    There is no Job server for Crystal Reports Job Server
    Do i need to create it and how.

    Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

  • In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is   overheating.  What would that be - so I can have repairs done?  The

    In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is
    overheating.  What would that be - so I can have repairs done?  The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
    <Edited By Host>

    Hello USME,
    'Tis a common problem on old Macs.
    Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
    Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
    Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
    Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through  the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
    Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
    A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire  working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
    In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
    Good luck!... Jon

  • Can Adobe Collage be used for images smaller than the standard 1200 by 789?

    Can Adobe Collage be used for images smaller than the standard 1200 by 789?

    Hi,
    * Photoshop Touch does have very good text capabilites.
    * For opening the Collage as an Artwork (Merged layer) in Photoshop Touch, you just need to upload the Collage file to Creative cloud and import it directly into Photoshop Touch.
    But if you are looking to preserve all the layers of the Collage file, you should download the Collage file as PSD from Creative Clould and import it in Photoshop Touch as layers.
    * Collage does have canvas scalability, you can extend up the canvas on all the four directions. But i think in you case you are looking for having specific custom sizes of the canvas, which is not currently available in Collage. Currently you cannot shrink the canvas below the default canvas size.
    Hope this is helpful. Please do revert back if you have more queries.
    -Subbi

  • Can we know buffers used for a particular program?(not for the instance)

    Can we know buffers used for a particular program?(not for the instance)

    You can do a runtime trace using ST01 but you won´t find out how much buffer a program "uses" since the buffer is shared for all workprocesses.
    Markus

  • Can Audit Vault be used for getting detailed read type information from the siebel database?

    Can Audit Vault be used for getting detailed read type information from the siebel database?

    Kramer wrote:
    saurabh wrote:
    check below cmd to see where archive are generated.
    SQL> archive log list
    And also check the following
    SQL> select flashback_on from v$database;
    Hi
    Here is the out put
    SQL>  select flashback_on from v$database;
    FLASHBACK_ON
    NO
    SQL>  archive log list
    Database log mode              Archive Mode
    Automatic archival             Enabled
    Archive destination            USE_DB_RECOVERY_FILE_DEST
    Oldest online log sequence     11
    Next log sequence to archive   12
    Current log sequence           12
    The flashback is not enabled. But archive log list shows archive destination is specified to use_db_recovery_file_dest.  And I checked the log_archive_dest_10 still empty
    Flashback off or on has nothing to do with it. 

  • You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

    You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

    Forced me to do a little research.
    DBCC SQLPERF(logspace)
    See also
    http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

  • WebtopNaming - can not find server name for server ID

    We have a LB, and web servers in front of OpenSSO app servers in our environment.
    OpenSSO debug log CoreSystem fills up with lot of errors like these:
    ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
    Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
    There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
    Any ideas about the root cause?
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Platform Server IDs -> [03, 02, 01, 04, 05]
    amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
    ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
    at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
    at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
    at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
    at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
    at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
    at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
    at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
    at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
    at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
    at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

    Thank You for the response.
    Here is my site configuration in OpenSSO:
    There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
    Servers:
    http://host4.company.com:8080/openSSO
    http://host5.company.com:8080/openSSO
    https://host4.company.com:8443/openSSO
    https://host5.company.com:8443/openSSO
    Only one site with secure URLs is configured
    Sites:
    site1
    Primary URL: https://opensso-qa.company.com:443/openSSO
    Assigned Servers:
    https://host4.company.com:8443/openSSO
    https://host5.company.com:8443/openSSO
    From the CoreSystem log, Server ID definitions are:
    https://host4.company.com:8443/openSSO=01
    https://host5.company.com:8443/openSSO=02
    https://opensso-qa.company.com:443/openSSO=03
    http://host4.company.com:8080/openSSO=04
    http://host5.company.com:8080/openSSO=05
    Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

  • Can FW CS3 be used for graphic for printing?

    I am very familiar with FW but I do not like Photoshop,
    however I have both I preffer to use FW. As I have seen on one
    presentation new FW CS3 has CMYK pallete so my question is: can FW
    CS3 be used for preparation of graphic for printing or what are the
    obstacles? After preparing images in FW I will use InDesign for
    text or maybe the text in FW is wector and maybe I could use FW
    including text and not to use INDEsign far small projects? Does
    anyone has any experience with this subject?
    Regards
    Martin

    qnnick wrote:
    > I am very familiar with FW but I do not like Photoshop,
    however I have both I
    > preffer to use FW. As I have seen on one presentation
    new FW CS3 has CMYK
    > pallete so my question is: can FW CS3 be used for
    preparation of graphic for
    > printing or what are the obstacles?
    Fireworks does not operate or export in CMYK color space. It
    was
    developed for screen images only, and operates and exports in
    RGB color
    space. It is not recommended that you use it in preparation
    of images
    for print. You mentioned that you don't like photoshop. You
    might like
    Illustrator better.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    http://www.adobe.com/communities/experts/

  • Can an iMac be used for WD My Book Live safepoints?

    I have a Western Digitial My Book Live network drive.  All Mac's and PC's can read/write without a problem.  I would like to create a safepoint (WD term for backup) on an iMac but can't seem to get past correctly discovering the devices on the network.  The MBL can 'see' the shares on the XP PC but nothing on the Mac's.  Unfortunately the XP PC is not suitable for backups.
    Can a Mac be used for MBL safepoints?  If so, how is that accomplished? 
    Yes, I've posted this same question the WD Support and WD Communities but no responses.  Most MBL Mac users posting on WD forums are using them for Time Machine.  I thought maybe someone on the Apple forums might have solved this problem.
    Thanks in advance for any help.
    Mike

    I am having the same issue.  Did you ever find an answer?  I see no one ever responded to you.  I have a WD cust service Tech support question submitted but no answer yet there either.  Thanks for any info you have.
    I get the error
    30000 - Unknown error. Retry your last operation. If the error persists, contact WD Support for assistance.
    (share_discover_9)
    when I choose the iMac as the location I would like to use.

  • Can a IDOC be used for data exchange from R/3 to CRM

    Hi All,
    First, can a IDOC be used for data exchange from R/3 to CRM
    I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
    To achive this can I use IDOC?
    Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
    Please respond immediately.
    Regards,
    Gopinath

    IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
    Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
    Hope this helps,
    Kai

  • Can photoshop elements be used for commercial work?

    Can photoshop elements be used for commercial work?

    Check with the company that does your printing to be sure that output from PSE is ok and their file format requirement.

  • Can Firefox Hello be used for three or more way calling or is it only for person to person?

    Can Firefox Hello be used for three or more way calling or is it only for person to person?

    hello again, i've asked in the development channel for firefox hello about this issue: multiparty video-conferencing is on the long-term roadmap but it might still take a lot of engineering (firefox hello is based on the webrtc standard which is a peer-to-peer protocol between two machines only - multiparty calls might be a rather tricky thing to figure out on this basis)

  • Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc

    Hi,
    Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc.
    Reason: We have a job that creates leads, tasks in 11i, but r12 is not working as expected, an SR is open with Oracle for a long time and no solution so far. I am thinking of using SQL*loader to populate the data, but these are html pages. Will SQL* Loader work?
    12.1.4 / 11g db
    Appreciate your inputs.
    Thanks,
    K

    Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc. It should work.
    Reason: We have a job that creates leads, tasks in 11i, but r12 is not working as expected, What is the issue you have with R12?
    an SR is open with Oracle for a long time and no solution so far. I am thinking of using SQL*loader to populate the data, but these are html pages. Will SQL* Loader work?What was Oracle feedback? Did they say it is certified and can be used?
    Thanks,
    Hussein

  • Can sap ps be used for product development  for cost monitoring?

    sap-pp is configured but client insisting for product development they want sap-ps ,can sap ps be used for product development  for cost monitoring in textile industry?and how to configure with reference to sap-pp?
    venkatdas vanga

    Hi,
    SAP PS has good Integration with PP and FI CO modules. So goes well along the ETO scenario.
    The normal process is that Project is created and goes in to design phase , where we design product as per customer's requirement . Design BOM helps in this.Once you design is ready you can generate Production Orders base on MRP generated with reference to Projects.
    All the cost including overheads are charged to the Project as actual cost.
    These costs are later settled to Cost Center.
    Refer this link for detailed information http://www50.sap.com/businessmaps/76FC9D515D244754A09308BA54E97C42.htm
    Thanks,
    Nitin

  • Can ethernet ports be used for windows pc as a LAN so that i can share all documents through it?

    can ethernet ports be used for windows pc as a LAN so that i can share all documents through it?

    The current 27-inch iMac can. Other iMac models can't outside of a VNC setup or ScreenRecycler; all such solutions require a standalone monitor for setup and troubleshooting.
    (51433)

Maybe you are looking for