Can the task groups in consolidation monitor be scheduled?

Hi,
Can the task groups in consolidation monitor be scheduled?
If yes, please advise.
Tq
Regard, Renee.

It can be accomplished using program UCBATCH00 or UCBATCH01.
I've used UCBATCH00 in several cases.
These programs require variants for each task, version, period and year combination. And, each variant requires a "sub-variant". The sub-variants are not transported and must be created in each system manually.

Similar Messages

  • Can the iMac 27" be a monitor for ps3?

    I am planning to use my imac as a monitor but i have to buy the Belkin AV360 but some says that i only need the mini Display port to HDMI because the iMac can already be used as a monitor by pressing command+F2. So, which is which? If i have to buy the Belkin, is there another way to do it or another cheaper product?

    Your computer supports 32 GB of RAM. You can buy the RAM in OWC to guarantee maximum performance with your computer.
    Respecting to the hard drive, you can install another hard drive on your Mac. To install it, follow the steps > http://www.ifixit.com/Guide/Installing+iMac+Intel+27-Inch+EMC+2429+Hard+Drive/75 55/1

  • Can the IMAC use an extended monitor?

    I have the old Imac G4, a fantastic computer, but the screen has driven my old eyes crazy. I'm looking at getting a nice new Intel Imac and was wondering if it has the capacity to extend the screen to a second monitor? I know the original Imac could not do this. Will the new Imac have this capability.
    Thanks in advance, you guys have saved my life on more than one occassion.

    Yes, the Intel iMacs are the first iMacs to be able to support a seond monitor in both mirror and extended desktop mode.
    According to the tech specs found HERE (look in the middle column under "Graphics and Video) and you will see that the iMacs have -
    "Support for external display in extended desktop
    * Digital resolutions up to 1920 x 1200
    * Analog resolutions up to 2048 x 1536
    Support for external display in video mirroring mode"

  • Can the imac be an external monitor fr another system?

    Hi, I am wonddering if the monitor portion of the imac can be used on a separate system. I am hoping to use it as an additional monitor for my laptop. This ould not be it's sole use but I would like to be able to do it occasionally. Is this possible?
    Kalel

    No, it does not have a vga input.
    However,
    If its a windows laptop, and you are not doing that requires video playback.
    You can use windows remote desktop, which is similar to a vnc but gives you much better performance.
    for example, I have been able to use photoshop remotely with acceptable performance, Microsoft word is almost as quick as running in on the physical machine.
    The only things a vnc or remote desktop is not suitable for is video playback, games of course, intense graphics, and applications that make direct use of the audio hardware. (audio is redirected to the remote client)

  • Can the new MBP support three monitors?

    Will the new MBP's support a three monitor setup? If I plugged one into the HDMI port and two through thunderbolt-to-DVI adapters, would the laptop recognize them all?
    Thanks!

    You would need an adapter like this one:
    http://www.matrox.com/graphics/en/products/gxm/th2go/digital_se/

  • How to use Start Task Group for Workflow Interface

    Hi all,
    anyone who can tell me how to use the Interface IFWFTSKGRP (Start Task Group for Workflow Interface)?
    As far as I understood the documentation it can be used to restrict the selection of workflows that can be started in the Generic Object Services. But the question is how to implement it.
    Best regards,
    Carsten
    Edited by: Carsten Drewes on Jun 10, 2009 10:30 AM

    Hi, Carsten,
    (probably it's a bit too late to post an answer after 3 years , but I'll post it in case someone else needs it)
    You should implement GetTaskGroup method.
    The code should return id of the task group (otype TG, mantained in PFTC) that holds the list of workflow definitions.
    Here is a sample implementation. It's taken from FORMABSENC business object. It belongs to SAP demo workflow "Notification of Absence". I suppose it should be present in most systems and you can see it in action.
    begin_method gettaskgroup changing container.
    DATA: taskgroup LIKE rhobjects-object.
    *- set task group
    taskgroup = 'TG70000023'.
      *- set result
    swc_set_element container result taskgroup.
    end_method.

  • Consolidation monitor

    Hi Experts,
    I have a problem with the consolidation monitor. The standard BCS content was activated and the customization was completed. When i run the consolidation monitor, there is no hierachy displayed but the sequence of task heading columns are there.  is there any thing that I missed from consolidation workbench? The master data for the consoloidation unit is created in BCS.
    Appreciate your help and time.
    Thank you.

    hi Eugene,
    Thank you for the suggestions.
    - ConsUnits hierarchy.-> This is checked and it is defined in Work bench..
    - Tasks hierarchy with tasks assigned.-> Tasks hierarchies are created and respective methods are assigned. Here my question is, should i need to assign the task methods to consolidation units during the customization process? If yes where shall i do it please?
    - You are trying to see the monitor in the same version and year/period.-> yes this has been checked already
    - Cons frequency for versions combinations is set.-> Yes
    Actually I am able to see the tasks in the column headings but not the cons unit hierarchies. This seems to be very strange issue. Any suggestions will be really appreciated.
    Thanks.

  • Create a task group ?

    Hi,
    how can i create a new task group ? With transaction PP01 i can't create a object 100 only 1001 but which transaction to create a new task group ?
    Thanks

    Hi
    Tcode for creating the task groups or task is PFTC_INS
    Thanks
    Naveen Avalur

  • Agent assignment for a task group

    Hi,
    I have created a TAsk group which has two workflows inside. But when go for the agent assignment for the task group via OOCU tcode, it is not showing the workflows under the task group.
    Plz let me know wht may be the problem...
    Thanks,
    Sivagami

    Hi,
      I am not able to assign agent through task customization [ OOCU Tcode ]. But I am able to assign in PFTC tcode.
      Any clues?
    Thanx,
    Sivagami

  • Firefox closes when I shut down, but when it is running, I can't see it on the monitor or find it in the Task Manager.

    When I open Firefox, nothing seems to happen. It doesn't appear on the monitor and the Task Manager doesn't list it as running. But when I shut down the computer, Firefox must be closed before shut down can be completed.

    The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
    For your SysFader issue, this "may" be the problem:
    1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
    2 Click on the "Advanced" tab. This will load a new page of options.
    3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
    4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

  • InterUnit Elimination Task not shown in Consolidation Monitor

    Dear Experts,
    WHile executing The consolidation Monitor for Inter Unit Elimination Task,
    I can see the Task at Company Level,, but not at Consolidation Unit Level. Can some one suggest how to resolve that.
    Hierarchy--NameTask Group--
    Task
    Hier-1--Hier NameO--
    O
    Cons Unit-1------ CU Name--Blank--
    Blank
    Cons Unit-2------ CU Name--Blank--
    Blank
    Kindly advise.
    Thanks
    Rakesh Shrivastav

    Dear Sir,
    I have defined teh document Type as follows :-
    Properties Tab
    Posting Level -    Two Sided Elimination Entry
    Balance Check-   Error when Balance not equal to Zero
    Application-         Other
    Posting-               Automatic Posting
    Inversion -         NO Automatic Inversion
    Key Figures
    Transaction Currency (Ticked)
    Group Currency (Ticked)
    Number Range : (ZX) Created and assigned
    Clearing Items Tab
    Clearing Balance Sheet
    GL Account - GL Account (Created manually in BCS as BS Item)
    Clearing Income Statment
    GL Account - GL Account (Created manually in BCS as INcome Statment  Item)
    Is any thing ommited???

  • Problem executing task in consolidation monitor

    Hello
    I have a small issue i get the following error message when i try to test executing a task in cons monitor for load from data stream
    Task 001001 cannot be executed in period 001
    Message no. UCS0150
    Diagnosis
    No method with a period category containing period 001 is assigned to task 001001 in version 111 for the time period 2008/001.
    System Response
    Task cannot be executed in period 001.
    Procedure
    If you still want to execute task 001001 in period 001, you need to use period categories that contain period 001 in the customizing settings of the task when you assign a method.
    Here I am trying to collect data using Load from Data Stream, I have defined the method and I am able to test the same in consolidation workbench
    But the same does not work in consolidation monitor
    why??
    Following are defined :
    Method for Load from Data stream
    Method
    Task
    In consolidatin monitor I have
    Hierarchy
    task group and task.
    Regards
    sameer

    Hi Sameer K
    Now I got the same error message, when executing data collection task in cons monitor.
    I did as per inputs provided by you in this thread.  But it was not work.
    Let us explain what occur in my end is i changes period category in data collection task and then save it. After than I close the session and reopen, what ever i changes earlier was not appearing in my workbench in Data collection task.
    Configuration in Data Collection task was:
    Cons Freq: Monthly
    Period Category: All method follows same method.  In this we maintain 1 to 12 periods
    Assign method: Depends on Company (I configred data collection method for each company)
    Pls provide inputs to resolve
    Madhu

  • Need to change the targeting group of a Rule or monitor after a alert is created.

    Hi All,
    I have created many alerts and they are working fine. Currently due to business requirement we have installed Windows server 2012 operating systems in our production environment. But we have targeted the
    "Windows server 2008 r2 full operation system" group as per the below screen shot. As we now have to import the management pack for Windows server 2012 as well.
    What we have planned is to change the targeting group from "Windows server 2008 r2 full operation system"
    to "Windows server operating system group" so the alert / monitor or rule will target all windows server which has been discovered in SCOM rather that only the servers running Windows server 2008 r2.
    I was also not able to set overrides for this as that server was not coming under Windows server 2008 r2 full operation system as it was a Windows server 2012 agent.
    I can also go ahead and create new alerts but i have created custom of 1000 alerts and i cannot go ahead and re create them.
    Is there any way to change them. If yes Can i do a bulk change via powershell ?
    Below is the screenshot of what i really want. Can any on e please help.
    Gautam.75801

    You can't really change the target class of a monitor in a sealed vendor pack. If this is your own custom pack, then you can change the target class no problem, but this would need to be done on the unsealed XML (using VSAE or some other authoring tool).
    Then you can seal the pack and re-import (should be upgrade compatible, since you are just changing the target).
    I'm not familiar with this particular monitor in your screenshot, but it looks like this should probably target Exchange? If this is the case, then I would recommend targeting the closest typed class that the monitor should run against. In this case, some
    type of Exchange class that is already in the Exchange management pack.
    Otherwise, you can also create your own custom class for targeting, which I describe in detail on my blog.
    Here are all my sample VSAE fragments.
    Here is an example of
    using the Application Component base for your new class.
    Here is an example of
    using Local Application base for your new class.
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • Firefox starts up and shows up in the task manager, but displays only off screen. How can I make it display elsewhere? I have restarted and reinstalled to no avail.

    Nothing to add here.

    This page will position the Firefox window at the upper left of your display (assuming you haven't disabled JavaScript):
    http://dev.jeffersonscher.com/jstest.html
    If Firefox is your default browser, you can load that page by clicking the Windows "orb" on the task bar and pasting it into the "Search programs and files box", then press Enter or click the result with the Firefox icon next to it.
    I don't have a dual monitor setup, so I don't know whether it works in that case.

  • Save the task to a group common folder rather than in Draft folder?

    I have created a form with save funtionality. When I open the form in task and claim it from a group, Now, the task is getting is assigned to the user and so when he save the form by clicking the save button in workspace, the task is getting saved in Drafts  folder in workspace. Is there any way like we can save the form into the group again or some common folder so that persons of thaat group can access the saved task?

    Hi Han,
    The "group" assignment won't work when you need specific items tasks to be assigned to individuals. "Someone" in that group needs to pickup the task, alternatively you can pick a random individual in the group.
    What it sounds like you need to do is query your LDAP server for a list of individuals in the group and then send task assignments to each of them. Either all at the same time or one after the other.
    For the handling of the data, it depends on what people are actually doing with the form but the basic concept is that you would extract data from each of the forms, then place all of the data into a single form. Alternatively, you can extract the data from the forms, then generate separate PDF's (I'm assuming you were using XDPs) and then create a single PDF containing all of the documents using Assembler.
    Which version of LC are you using and what's the end-result of your 4 different people? Are they answering the same information or physically seperate pieces of a form?

Maybe you are looking for