Can the VideoMaster Video Binary Files be saved as bitmap files instead?

Hi,
When I run VideoMaster it only seems to capture files to be saved as .vbf files. I am not familiar with this standard and suspect that a large amount of data is compressed.
All the frames on the product that I am testing are I -Frames and I wish to compare these frames. Since a .bmp file is uncompressed, I reckon this would be the best way/ simplest way to compare two files.
Any capture cards I have used previously allow the video/ grabs to be save as bitmap files.
Is there a way of saving the files as .bmp files instead of .vbf using Videomaster?
Thanks,
Sean

Hi Sean,
VideoMASTER .vbf to BitmapThis is actually a feature that will be released in the upcoming VideoMASTER 3.0, which is to be released soon. The feature will allow to save the image in the video buffer to one of the following formats:
.bmp
.png
.jpg
In the case of analog video, it will take the first frame, if more frames are acquired, and save that to disk. In case of digital, we only acquire s single frame, so it is that frame that is being saved. The feature can handle analog video such as Composite video, S-Video and Component video, and in the case of digital, it will save the digital image. All formats are saved as 8-bit of RGB information.

Similar Messages

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

Can the exported video from FCP X play in WMV?

(1) Can the exported video from FCP X play in WMV?
(2) If not, can I convert with the help of Compressor 4 to make it to play in WMV?

No to both. You need third party software to create WMV. Telestream has tools for this.

I can't Import video&Audio file in photoshop cs6

I can't Import video&Audio file in photoshop cs6
And mytimeline is like Cs5

NO!~ is CS6 i'm very sure

Can the new garageband open files from the previous garageband? in my case it seems not to work and I would like to know if it is possible at all...

Can the new garageband open files from the previous garageband? in my case it seems not to work and I would like to know if it is possible at all...

No.
I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled.

How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

I would like to read in and write physiological data files which were saved by BioPac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/ app156Fi
leFormat/FileFormat.htm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/ app155macffmt/macff.htm).
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, I was a little unsure which LabView data types correspond to int, char , short, long, double, byte, RGB and Rect. And, since it is for PC I am also assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
Two samples *.acq binary files are attach to this post to the list. Demo.acq is for version 3.7-3.7.2, while SCR_EKGtest1b.acq was recorded and saved with AcqKnowledge 3.8.1, which version number is 41.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to i
llustrate it.
Many thanks in advance for your help.
Donat-Pierre
Attachments:
Demo.acq ‏248 KB
SCR_EKG_test1b.acq ‏97 KB

The reading of double is also straight forward : just use a dble float wired to the type cast node, after inverting the string (indian conversion).
See the attached example.
The measure of skin thickness is based on OCT (optical coherent tomography = interferometry) : an optical fiber system send and received light emitted to/back from the skin at a few centimeter distance. A profile of skin structure is then computed from the optical signal.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Read_AK_time_info.vi.zip ‏9 KB

How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

I would like to read in and write physiological data which was saved by Biopac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/app156FileFormat/FileFormat.h
tm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/app155macffmt/macff.htm) .
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, because it is for PC I am assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to illustrate it.
Many thanks in advance for your help.
Donat-Pierre

One more step...
short are U16 integer
double are double precision float
bool seem to be 2 bytes (= U16)
char are string (variable length)
rgb are U16 integer, with high order byte = 0
rect should be 4 x U16 (top, left, bottom, right)
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How can I open different binary files from BLOB column ?

If we store some type of binary file (XLS, DOC, PDF, EML and so on, not only pictures) in BLOB column how can I show the different contents? We use designer and forms 9i with PL/SQL.
How can I copy the files from BLOB to file in a directory or how can I pass BLOB's content to the proper application directly to open it?

The mime type is just a string as explained above (e.g. application/pdf...). There are lot of samples here and on metalink.
E.g. add a column mime_type varchar(30) to your blob table. Create a procedure similar to the following:
PROCEDURE getblob
(P_FILE IN VARCHAR2
IS
vblob blob;
vmime_type myblobs.mime_type%type;
length number;
begin
     select document, mime_type into vblob,vmime_type from myblobs where docname = p_file;
     length := dbms_lob.getlength(vblob);
     if length = 0 or vblob is null then
     htp.p('Document not available yet.');
     else
     owa_util.mime_header(vmime_type);
     htp.p('Content-Length: ' || dbms_lob.getlength(vblob));
     owa_util.http_header_close;
     wpg_docload.download_file(vblob);
     end if;
exception
     when others then
     htp.p(sqlerrm);
END;
Create a DAD on your application server (refer to documentation on how to create a DAD).
Display the blob from forms (e.g. on a when-button-pressed trigger):
web.show_document('http://myserver:port/DAD/getblob?p_file=myfilename','_blank');
For storing blobs in a directory on your db server take a look at the dbms_lob package.
For storing blobs in a directory on your app server take a look at WebUtil available on OTN.
HTH
Gerald Krieger

Can't see video TS files on DVD.

I made a DVD with Adobe Encore. But on my Mac, I can't see the video TS files nor the data files I have burned on that DVD.
The DVD was authored on another iMac.

Thanks for your help,
I duplicated the disc by right clicking, then selecting duplicate. I received a message stating "you may need to enter an administrator password to change the name...". Entered my password, and the disc was copied to a new folder appearing on the desktop.
I've opened terminal and dragged the folder there, the name appeared in the terminal, I pressed enter, it ran "-bash" and just says that the folder is a directory. I don't know commands for terminal so I'm not sure what else to do here. I tried typing "Is Volumes/foldername" as you suggested, but it says command not found. (I didn't think you were saying to use "Is" as the command, but wasn't sure so I tried it anyway.)
In the get info window it has "Privilege = No Access" for Me, unknown, and everyone. I tried to change to Read & Write, but it does not change. The drop down under the gear thingy, between the - and padlock, is all grayed out and unelectable. This is what made me think something is wrong to begin with. How can I have no access to a folder I copied?
Could this be some sort of Sony format issue when it made the DVD? Setting everything to "No Access" on the disc itself? Or could it be that my mac is not compatible with files that are created elsewhere?

Create the database from Binary files

Hi
Can anyone assist is possoble to build a database with binary files.
I lost all the database files in the standby server, im not having installation files. Can I build the database by copying the binary files from different sever? if possible please provide me the steps.
Database Version : 8.1.7.4.0
OS Version : Sun OS 5.8
Venkat
Edited by: R VENKAT on Nov 4, 2008 4:15 PM

Hi Venkat,
I think this isn't the best forum to answer your question but I'll try.
You've lost your DATABASE FILES (means DBF files, control files (CTL), redo logs)? Correct?
Or did you loose also the Oracle Home where the software has been installed?
If you've lost your Oracle installation than you might do the following:
1) Install 8.1.7.0 software on your standby server
2) Install patch set 8.1.7 4 into this home
3) Metalink-Note:70233.1 will describe the full process of creating an 8i standby database from your PROD.
If you use RMAN than please have a look into Metalink-Note:203980.1 and Note:118409.1 - it'll describe also the init.ora parameters necessary for a standby
You'll find a description of an ideal init.ora for the standby in ML Note:139809.1 and specific for Data Guard 8i here: ML-Note:132991.1
Kind regards
Mike

The dreaded "Video Error-File Not Installed" When trying to watch LiveTV in WMC

I'm getting the following error message when trying to use Live TV in WMC:
Video Error
Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart the computer.
On this system my tuners are the Hauppauge HVR 2250 and the Hauppauge HD PVR. It took awhile to set up, but when I click play on a channel I get 10 seconds of video, an audio loop of the same sound over & over followed by the above error message.
I ran into this problem once before on my Home Theater HTPC when trying to access the ATI Cable Card solution. To get that to work I had to uninstall and reinstall Playready. I tried 3 different ways of doing this on my new build & it did
not fix the problem. The only fix I didn't try was the one on Ceton's website that involves a whole lot of deleting of folders.
Since this current build doesn't have a cablecard installed, and gets the non-clear QAM stations from settop box through HD PVR, would it still be the Playready needing to be reset? The symptoms look identical to when I had the previous problem.
These same files play in the BeyondTV that I'm trying to migrate from, so all codecs appear to be onboard. I am using the latest HDPVR MediaCenter driver from the Hauppauge website & the latest drivers on the HVR-2250.
Thanks for any help!

I had this problem after upgrading my graphics card to an AMD 5450 and the solution after a couple of days of hair pulling was one I hadn't come across before in relation to this problem.
It turned out that the problem was caused by the screen refresh rate, it was set to 60Hz by default and I got the Video Error message but if I changed it to 50Hz then playback of recorded programs or watching live TV worked.

Can the iPhoto Library package file be recreated?

I recently moved my iPhoto library to a new LaCie solid state external hard drive, because it had reached 130GB in size and was taking up too much space on my hard drive. My iPhoto library has 30,000 photos with lots of events, smart albums and metadata (faces, keywords, etc.). Unfortunately the external hard drive failed and I had to pay for data recovery services. When I got the external hard drive back, the Masters folders were all there with my photos, but the iPhoto Library package file seems to be missing. Is there anyway to recreate the iPhoto Library package to include all the files AND the associated metadata?
I found instructions on how to start from scratch by importing the Masters...but this method does not retain metadata. Any ideas would be really appreciated. Worst case scenario, I can go back to a Time Machine back-up from June 2014 and use that as a starting point, but I'd much rather not have to take that route.

but the iPhoto Library package file seems to be missing.
You cannot recreate the iphoto library package from your Masters folder. It is an intricate web of linked files. Use your most recent backup as a starting point, and then add the newer files from your recovered Masters folder.

How can I read a binary file?

In my AIR application, I'm trying to read a binary file and then post it via an HTTPService to a remote ColdFusion component that accepts a "binary" type argument. The result of the post is always:
The FILEOBJ argument passed to the addFile function is not of type binary.
Here is how I'm reading the file in Flex, where fileObj is of type File:
var fs : FileStream = new FileStream();
var bytes : ByteArray = new ByteArray();
fs.open(fileObj, FileMode.READ);
fs.readBytes(bytes, 0, fs.bytesAvailable);
fs.close();
I then pass "bytes" as the parameter to my HTTPService's send call, like so:
var params : Object = {method : "addFile", fileObject : bytes};
service.send(params);
When I debug, bytes contains the correct file size. Is it not in binary form? I've tried several other suggestions, but with the same result, so would appreciate any help.
Thanks!

One more step...
short are U16 integer
double are double precision float
bool seem to be 2 bytes (= U16)
char are string (variable length)
rgb are U16 integer, with high order byte = 0
rect should be 4 x U16 (top, left, bottom, right)
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Can the ipod hold any file?

Hi
i was wondering if the ipod can hold any kind of file?...
like an external HDD.....
Thanx...

Sure, any file supported by the drive format. Since yours is probably a Mac formatted iPod, it should work with any file. If you had a Windows formatted iPod that is in Fat32 format, you can hold any type of file, but you have a file size limit of I think 4GB for a single file.
Patrick

Can the iPod Video disk break if you move it whie running?

If I say run or dance to the iPod Video music would the hard drive break?

i've had two disk-based ipods die when running with them, both wth disk failure (reported by ipod diagnostics), others have reported similar woes over the years
even if it doesn't kill the ipod, there's the chance of it hanging if bounced when accessing disk (the skip protection is quoted at up to 20-25 minutes i think, but that is based on spinning up the disk every 20-25 minutes to refill the buffer, not on opportunistic refill to always mantain the buffer near full, so at least with the old firmware if the ipod was subjected to enough vibration when it tried to reload the buffer it would hang)
imho it does depend on running style and how the ipod is carried, so some people may run/jog without problems
i bought a nano for running, no more problems

Can the VideoMaster Video Binary Files be saved as bitmap files instead?

Similar Messages

Maybe you are looking for