Can the w520 use 1.35v ram at 1.35v or does it auto volt to 1.5. Can you underclock the intel gpu?

It's probably the only thing that is warm on my laptop. Also is there a tool to underclock the integrated gpu.
Solved!
Go to Solution.

I think you can set the performance level of the integrated GPU in the intel Graphics Control applet.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

  • CAN YOU??  Intel program on a powerPC

    Can you install a Intel on a powerPc? In not can I get intel processor?
    I have spent several HOURS looking for the answer. Some sites if you partions the disk you can and some mention Logic express
    I have a parallels 3.0 and didn't notice it was Intel Only
    Any Help you be MUCH apprecaitedd

    According to Wikipedia, the last version of Virtual PC for Mac was released in 2004 (version 7), so it definitely is not Leopard compatable; guess you are lucky it works at all.
    Virtual PC has always been extremely slow. Bet it is worse in 10.5.
    DALE

  • Disabling Intel GPU in the Z68MA-ED55

    From what I have seen so far in the BIOS (v10.3), there seems to be no way to completely deactivate the Intel GPU on my i5-2500 with this motherboard.  Am I missing something here, is this feature perhaps planned in a future BIOS release, or is this type of functionality impossible under the z68 chipset? 

    Quote
    I'm hoping a firmware developer can chime in here and provide some clarification on this
    That may be a possibility. Perhaps you want to open a ticket with MSI technical and pose that question. >>How to contact MSI.<<

  • Do you have to use the Apple RAM with the heatsink? Or can you use any 667 MGz DDR2 RAM?

    I'm sprucing up my MacPro 2 x 2.66 GHz (hard drives, video card, & RAM) and would like to know if I have to use Apple's RAM with the heatsink on it.
    Meaning, the RAM I end up purchasing, does it HAVE to have the heat sink on it? Or can I use any regular DDR2 667 MHz dimms?
    I've been asking/researching and am getting mixed answers.
    Thanks for the help!

    You MUST use RAM with both the large Apple-specified Heatsink AND the Apple approved Temperature Sensor. These are "tuned" to the airflow inside a Mac Pro. Modules must also be ECC modules, 72 data bits wide.
    If you decide not to, the internal fans may not work properly, the modules will get too hot and will fail prematurely
    The best way to solve this pronlem is to deal with a Vendor that knows Macs and can tell YOU which modules work in your Mac -- guaranteed or your money back if it does not work for any reason. And a lifetime warranty -- if it ever fails and still has their sticker on it, they will replace it, free.
    There are a few one-off deals out there that may be a little cheaper, but the cost of dealing with reputable Mac-oriented Vendors does not add substantially to the price. And you do not get stuck with "you buy it, you own it" modules that do not work in your Mac.

  • I AM STUCK WITH MOZILLA FIREFOX / NOT SHOWN ON MY LAPTOP SCREEN / USING HUGE AMOUNT OF RAM IN GENERAL - CAN YOU HELP????

    Hi,
    I have copied these problem on you site, as I could explain better then what they did, wich my problem remain the same as they have. And part me explaining what is really happen to my Laptop.
    ''Mozilla/Firefox 4 will not SHOW on my computer SCREEN.
    Firefox won't load onto my computer. I have Windows 7, and each time I try to run the program to install it, it tells me I have another version still waiting to be installed that requires my computer to reboot. When I check "yes" to reboot, my computer reboots but still no Firefox. When I try to uninstall the the old Mozilla program from my Control Panels, there is no Mozilla files or programs listed not in my list of programs but when I go directly to the Windows File on the C: Drive, there's a Mozilla program file there. WHen I go into that file check, I attempt to open the uninstall program. I get an error message that says something to the effect of: "the version Mozilla on this computer is not compatable with my OS." Something about it being and 86bit program. My Firefox 3.6 worked fine 2 days ago. What's wrong??? ''
    '''Firefox 4 using huge amounts of RAM on sites with Java scripts
    I have been observing Firefox using huge amount of RAM when I am on sites that use Java Scripts to rotate images. I have tried a couple of different sites and have monitored the RAM usage. With Java script enabled Firefox 4 continues to grow its RAM usage by about 10MB a minute. I have had the usage hit as high as 1.5GB. As a comparison I have monitored the same sites in Internet explorer and have not seen the same issue. - Just to eliminate a site issue.
    Turning off Java Script solves the issue and eventually frees the RAM.
    I am using XP Pro, 3 GB RAM. '''''
    My experince with Mozilla Firefox:
    Here what really happen when I install the Mozilla Firebox on my La[top you can see the file is there but when I click the program to open its does not shown on the screen but when I check with WTM (Windows Task Manager) its shows that is ON and you can only witness the laptop going very slow and I have to reboot it, and I can not install any other Mozilla :( because of the same problem and all the above.
    I really need Mozilla to work as soon as possible due to important deadlines I have pendent, and i can only use Chrome but is not my ideal program. Can you help me , please ?????
    Thank you
    Vitor Mendes

    If it opens in safe mode, you may have a problematic add-on. Try the procedure in the [[Troubleshooting extensions and themes]] article.

  • HT4059 I currently use ibooks on my iphone 4s... I want to be able to send several pdf documents at the same time in one email, I thought there was a way to do this?  Can you help please?

    I currently use ibooks on my iphone 4s... I want to be able to send several documents at the same time in one email, I thought there was a way to do this?  Can you please help?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I am runnig Firefox 18.0.1 and the plugin-container is using all my ram, have tried altering dom.ipc.plugins to false but makes no difference. Any advice please

    I am running Firefox 18.0.1 and the plugin-container is using all my ram, have tried altering dom.ipc.plugins to false but makes no difference. Any advice please

    plugin-container.exe is used to run Flash and other plugins so if they crash they do not take down your main Firefox session. But... I don't think memory usage would be that different if you tricked Firefox into running Flash inside firefox.exe. (There was a thread with the trick, but I can't recall the details. It was not a regular Firefox setting.)

  • Can Illustrator really make use of 8GB RAM?

    Hello,
    I'm thinking of upgrading my 17" 2010 Core i7 Macbook Pro from the curretn 4GB of RAM to 8GB or RAM as the prices have come down considerably. (around £40.00).
    I've already posted a thread on a mac forum, but I thought that posting in on here would also be benificial.
    Basically I would like to know is, is there any point doubling the RAM? Can Illustrator realy utilise 8GB of RAM? My files are becoming larger and so Illustrator runs slower - I've monitered this in Activity monitor and the pages in/out seem to have a 10% difference which is apparantley a indication of more RAM needed. I've also seen a few 'Not enough memory' messages in Illustrator.
    Thanks for your input.
    Nathan

    Illustrator on the Mac is a 32Bit app currently. It can only utilize ~3GB of RAM. Hopefully, since Illustrator is one of the last remaining non-64Bit Adobe apps, that'll change in the near future. If you are buying for performance today.. it won't make any differnce. If you are buying for performance next year or 6 months from now, it may make a world of differnce.
    You can still launch and use Illustrator on a 64bit system (I do every day) but it won't see any additional RAM. That does not mean more RAM isn't helpful. Illustrator can use it's ~3GB and the OS cna utilise the rest. This does make things faster even if Illustrator is still limited. In addition, I don't know any Mac users that use Illustrator and do not use Photoshop. Photoshop is a 64bit app and will use as much RAM as you feed it.

  • I WANT TO BUY A MAC BOOK PRO. MUST I WAIT FOR THE ONE WITH RETINA DISPLAY. WILL THE FACT THAT THERE IS NO CD ROAM BE A PROBLEM. CAN YOU USE A EXSTERNAL CD ROAM ON A MAC?

    I WANT TO BUY A MAC BOOK PRO. MUST I WAIT FOR THE ONE WITH RETINA DISPLAY. WILL THE FACT THAT THERE IS NO CD ROAM BE A PROBLEM? CAN YOU USE AN EXSTERNAL CD ROAM WITH A MAC?

    Apple will gladly sell you a color coordinated and texture matching external SuperDrive to go with your Retina'ized MBP for about $80 bucks.
    Note that those models are completely sealed with no serviceable or upgradeable parts inside. So if you decide to bite the bullet, be sure to customize its guts to your heart's content from the get-go as no further change will be possible. This means CPU speed, amount of RAM and size of the solid state drive. Other external options, like the Superdrive, can be added later.

  • Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook 5,1? The intel is different (2Ghz not 2.3) and the speed is 1067 not 1333. But they are both DDR3.

    Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook? The intel is different (2Ghz not 2.3) and the speed is 2000 not 1333. But they are both DDR3.
    I have just upgraded the Pro to 16Gb and the MacBook is SO slow. Just wondering if I could use the old RAM.

    Full specification of MB5.1 RAM;
    204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
    MBP8.1, 8.2 or 8.3;
    204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
    PC3 is the same as DDR3. the number is peak transfer rate (approximated).
    Further reading suggests your swap may work, but it's not guaranteed. If you get 3 beeps on start up (or the sleep light flashing in bursts of 3), first check it's correctly seated, but be prepared to swap them back.
    If you encounter any instability or kernel panics, change them back.

  • Can my old IPhone be used to boost ram on a PC or Mac?

    Well, I have an old iPhone 3GS and soon enough this 4 will be retired as well. That being said I know that both of these devices are still quite worthy of use in various functions. I wouldn't get anything for turning them back into the store and I hope to re-use them in a different way. So my question is could I use my old phones to boost ram temporarily on my computer? I haven't found too many helpful resources for repurposing old iPhones and I love the devices.

    You can use the old iPhones as iPods. You cannot use them as RAM for
    a computer.

  • Can I use DDR2/667 ram in a machine wants DDR2/533 ram?

    I searched all over these forums, googled my eyes out, read the dev note for my machine and could not find a definitive answer...
    The scenario is this: I have a PowerMac G5 (Late 2005) M9590LL/A, that is spec'd for DDR2/533 or PC2-4200.
    I have a friend who just bought a 24" Intel iMac and upgraded the ram to 2 GB, thus he has 2 pieces of 512 mb DDR2/667 that are unused.
    He will sell them to me at a very good price. Will they work in my machine? Can you use FASTER ram and will it clock down to the proper speed in a machine that is looking for slower ram?
    Right now in almost all places online the DDR2/533 chips are MORE expensive than the DDR2/667 chips.
    Right now my machine still has the stock of 512 mb of DDR2/533 ram (2 pieces of 256 mb).
    Another friend told me to just put the chips in and see if they will work, I do not want to do this if there is some minor voltage difference that will either damage the motherboard or the DDR2/667 chips or both.
    I know in the PeeCee world, you can use PC133 ram in systems that need PC100, and DDR/333 ram in systems that need DDR/266, and likewise DDR/400 in systems that are looking for DDR/333, but I remember reading that DDR2 ram is more sensitive to BUS speed and voltage than DDR(1) ram.
    Any ideas?
    Please help me :>
    Thanks!
    Dual-Core 2.0 ghz -M9590LL/A   Mac OS X (10.4.8)  

    Welcome to Apple Discussions!
    Even if you found a similar form factor module with a
    higher spec than Apple's official, I would not put it
    in the machine. Mac OS X can be very particular
    about the kind of RAM that is installed, and panic if
    the wrong kind is installed, or cause problems such
    as unexpectedly quitting applications. Follow the
    specs to the letter. See my FAQ:
    http://www.macmaps.com/Macosxspeed.html#RAM
    So you are basically saying that higher-clocked ram will not spec down to run slower?
    Thanks for the info. I will give a good read to the link here to your FAQ.
    :>

  • HT204053 can you have multiple apple id's for the family but we all use the same iCloud?

    Can you have multiple apple id's for the family members but we all us the same iCloud account?

    You'll have to have an ID you all share in order to have a shared iCloud account. It would be sensible for each person to have their own ID and their own iCloud account for email and their own data (each would be on their own computer/iOS device or user account on a Mac) and then have a common account which everyone would sign into in System Preferences>Mail, Contacts and Calendars to access shared data.
    You don't want to be all using the email in a common account - if people are using email aliases remember these can't be detached from the account and transferred to another one. Having all your emails mixed up together can be somewhat impracticable.

  • How can you use the same Apple ID for music and apps but have a different iCloud

    Collectively in my family we have 1 iPhone 2 ipod(4th gen) and 3 iPad mini's and we like to buy music and apps through the same Apple ID so that we can all share it but we also have a problem about the iCloud.
    My son has one iPod and one iPad and he would like his contacts and messages to be shared between HIS two devices but he would also like all of the pictures taken in the family to be shared
    The same for my daughter and for me.
    Is there a way of selecting which devices share what????
    Thanks a lot
    Acwills

    You could and should set up different iCloud accounts in "Settings > iCloud", so that every user has its own email account, calendars, reminders, notes, storage for backups and app data (files etc.), by the way everyone could also use his own account for iMessage (Settings > Messages > Send & Receive) and FaceTime (Settings > FaceTime) so that you all could write and call each other.
    Next the Apple ID for music, apps and other media: You all could just set up the ssame Apple ID in "Settings > iTunes & App Stores" for all your media purchases like songs, movies, apps etc.

  • Can you use the same Apple ID on more than one MacBook Pro for updates and applications?

    We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID.  Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine?  I'm not sure how that works when you have multiple machines.

    An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services.   So you can use the same Apple ID for up to 10 Macs associated with it.
    To create an Apple ID you need to enter  your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

Maybe you are looking for

  • Sync Windows Mobile Treo 750 with Vista 64 bit, FINALLY DID IT!

    I have just spent 3 hours trying to set up sync between my Treo 750 and my new Vista 64-bit computer.  Here's what I learned: You have to download the Windows Mobile Device Center and its update (that's why some people felt they were downloading twic

  • Deployment failed when moved app to WLS 8.1 SP2

    hi, i have a portal application which has been running on weblogic 8.1 without any problems for over 6 months. now we are in the process of moving it to service pack 2. i installed workshop 8.1.2 and opened my portal app. i was able to build it witho

  • Recurring "Invalid volume directory count" error

    Hi everyone! I'm hoping that someone can shed some light on this issue, because I'm just about to lose my mind trying to figure it out! I manage a small companies' network of approximately 35 Apple Macintosh computers. All the computers are newer 200

  • How is the address selected in the Customer Account Statement (F.27)?

    Hi expert, The customer account statement (transaction F.27) uses the address which is in the customer master data. This is the customer master data on the company code level (Street, postal code, city). Is it possible to select the PO address (PO bo

  • URGENT: Flexible Link in report run as a portlet

    I would like to add a button to a report run as a portlet that "reloads" the portlet and shows a different subset of rows. How do I accomplish this without coding the full URL to the page as a link, because I would like to integrate this portlet into