Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services  and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you  can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

Similar Messages

  • Can I have more than one library for the same ipod nano?

    I have a desktop pc that I have originally setup my nano on. I have about 400 songs on that computer. I have about 500 other songs on my laptop, can I put itunes on to both computers and have them add the songs from each one respectively without erasing the other? and if so, how?

    Type 61675 into the search bar under the support tab on this website. "How to use ipod with multiple computers"
    Basically, you have to change your preferences to manually manage instead of automatically update.

  • Can we have more than One DC for the sales organization and Plant combo?

    Can we have more than One DC for the sales organization and Plant combination?
    If yes can you please site a practical example to clear the picture

    Hi
    First of all in SAP sales orgs are assigned to distribution channels and the combination of sales org and distribution channel which is called distribution chain is assigned to plant
    There is  no direct link  between sales org  and plant or distribution channel and plant
    So  sales org  and plant combination doesnot exists and
    it is only sales org and dist channel combination which is  called as distribution chain only exists
    Nowhere in SAP we are assigning sales org to plant
    It is because sales org alone doesnot make sense and its combination with dist channel only makes sense
    because sales org is a selling org and the distribution channel is the route to sell and this combination has only to pick the material from plant to process sales to customers
    The relation between sales org and distribution channels is many to many and also vice versa
    Multiple sales orgs can be assigned to one distribution channel and
    Multiple distribution channels  can be assigned to one sales org
    Similarly the relation ship between Distribution chain (sales org+dist channel) to plant is also many to many and vice versa
    Similarly plants from other company codes can also be assigned to Distribution chain to facilitate intercompany processes
    In whatever way look at it the multiple distribution channels can be fit anywhere
    Regards
    Raja

  • Can i create more than one library on the same computer?

    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • HT1657 Can you rent more than one movie at the same time?

    Can you rent more than one movie at the same time on itunes?

    I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
    There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
    So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
    select * from sales partition (sales_q1_2000)
    union all
    select * from sales partition (sales_q1_2001)
    union all
    select * from sales partition (sales_q1_2003)
    union all
    select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

  • Can I sync more than one iPhone to the same computer?

    Can I sync more than one iPhone to the same computer?
    I have one MacBook pro, already have my iPhone synced to it. I want to sync my wife's to it as well so she can share my iTunes library.
    Is this possible?

    Create a new user login (with a password) for your stuff.
    This way, your data won't get mixed up.

  • How Can I Update More Than One Ipod on the Same Computer?

    I've had my 30G Ipod since April 2006. For Christmas 2006, I bought my sister a 2G Ipod. I cannot figure out how to put songs on her Ipod as we both share the same computer and Itunes Library. I've already asked Ipod Corporate for help via their FAQ section regarding more than one Ipod operating with the same computer, but their advice (which told me to create a playlist small enough for her Ipod and checked as a shared playlist) did not work for me. I'd really appreciate any help with my problem. Owning an Ipod but being unable to listen to it, as I'm sure many people would agree, is quite annoying.

    There are basically two ways of using multiple iPods on a computer and these involve:
    a) Sharing a single iTunes library and user account.
    b) Creating multiple user accounts and having separate libraries.
    Sharing a Library
    If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
    Loading songs onto iPod automatically - Windows
    Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes
    However since you seem to have a problem with that method you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
    Separate User Accounts
    Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
    If you are unfamiliar with setting up Windows user accounts you can read more here: Using Windows XP User Accounts

  • Can you have more than one ipod on the same computer?

    me and my sister live together and we would like to be able to have two seperate libraries on the same computer. one library is already there and when the second ipod is plugged in, it comes up as a sub-library that is unacessable.

    There are basically two ways of using multiple iPods on a computer and these involve:
    a) Sharing a single iTunes library and or user account or
    b) Creating multiple user accounts.
    Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
    Sharing a Library and/or User Account
    If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
    Loading songs onto iPod automatically - Windows
    Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes
    Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
    Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page: Loading songs onto iPod shuffle - Windows
    It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
    Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library:
    Using multiple iTunes libraries -Windows
    Separate User Accounts
    Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
    I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here:
    Using Windows XP User Accounts

  • Can i create more than one attributes for the custom class created using java API

    Hello everyone,
    I have been creating class and its attributes programatically using java APIs, I want to know that is there any way to create multipal attributs for the same class in just one call of API with all the options for each attributes,
    thanks

    You can create a new class and define all of the Attributes at the time the class is created - this is the preferred way of creating classes. Use the addAttributeDefinition() method on ClassObjectDefinition. If you need to add attributes to existing classes, you can only add them one at a time (using the addAttribute() method on ClassObject).
    (dave)

  • Can you display more than one library from the same account?

    If I open iTunes on two computers in my house, I can only show one library on my apple tv. When I turn on the second computer, the first library goes away.
    Can you show one at the same time?
    Thanks

    Welcome to the Apple Community.
    Yes you can share more than one library at a time, just make sure that the homesharing ID and password you use for each one is the same on all of the libraries.

  • Users have more than one profile for the same role

    Hello,
    As I said in my earlier post I'm rather new to SAP.
    I'm doing now the security audit of my SAP system. In particular, I'm checking whether business users have access to DEBUG functionality.
    I have run report 'Users by complex selection criteria' and found certain number of such users. Then I looked further and discover that all these users have role X assigned to them. The profile P2 of the role X displayed in PFCG has DEBUG functionality deactivated. After second look I discovered that all these users have earlier profile P1 for the same role X assigned to these users. This profile P1 contains the functionality in question.
    I solved the issue by revoking the role X from the users and assigning it again. Both P1 and P2 profiles were removed from the users and only P2 was reassigned again.
    I used to think that role may have only the profile that is displayed in PFCG? Also, I used to think that if the role profie is regenerated the newly generated profile automatically replace the old one assigned to users. Am I wrong?

    Hi Pavel
    In simple and short ..
    Role contains authorization objects..
    Maximum limit of authorization objects for a role is 150 .
    So a role can accommodate 150 authorization objects.
    New Profile ABC is created , when ever you create a new role. 1-1 relation.
    But if a role has more than 150 authorization objects .. then automatically a new profile ABC01 will be created and it will also be aligned to that role .
    if role has 400 auth objects, then profiles will be ABC ,ABC01 ,and ABC02
    i hope this helps you
    Cheers
    Pavan M

  • More than one contract for the same contract account

    Hello experts,
    As you know, the same contract account could has more than one utility contract.
    I want - by customizing - prevent users from creating new move in ( new utility contract ) for a contract account that has a contract.
    I don't want to do this functionality by user exits. Do you know how can I do this by customizing ( spro )?
    I am appreciating any help.
    Thanks...
    Hussam.

    This depends on which transaction you are using for move-in.  The only control you can have on this is by configuring your Master Data Template to always use a New Contract Account being created during move-in.  If you are using CRM front end for doing move-in, you could by default check the option for create new contract account and lock that field from being edited.

  • Sourcing: Creating more than one PO for the same BID

    Hello,
    We are using the sourcing functionality in SRM 5.0 (classic escenario).
    On the basis of an acepted bid, we generate a Purchase Order in the R/3 Backend system.
    We noticed that in the standard, SRM lets us create for the same position of the bid, another Backend PO, without warning or error.
    We would like to manipulate this escenario in such a way that this PO repitition of the same Bid position is not possible.
    Anyone already found a way around this problem? May be we need to activate an error message?
    Thanks for any reply.
    Aart

    I agree that
    SRM lets us create for the same position of the bid, another Backend PO
    but it does give warning that I have seen.
    would recommed to work with yr ABAP team to see whether you can convert this message to type "Error".
    one more suggestion is for ..... PO_NEW badi
    hope you would have implementation of this exit.
    then you can check whether for current BO BUS2200 whether ECC PO is already created
    if yes
    then do not create again
    BR
    Dinesh

  • Time Machine Backups.backupdb folder more than one directory for the same machine

    Hi I am trouble shooting a Time Machine issue for somebody. They have multiple backup directories for the same machince in the Backups.backupdb folder. This causing the directory that is being used to have a restricted amount of space to use, therefore the backup timeline is only lasting for one month where oldest backups are being deleted. On top of this I notice that the options to delete individual backups or all of them is not available. I read that this can happen where there is duplication in backups.
    Any suggestions in how to remove backups that are redundant and select the correct one to keep appreciated. And...suggestions on why this may have happpened. One reason could be that when the Mac was originaly bought, two portable iomega drive were purchaed one to use at a main residence and the other at a country home. Each disk may have been used at different times for Time Machine.

    Start with Pondini's TM FAQs.

  • More than one location for the same library?

    My library is on an external drive which is almost full. Is it possible to just extend and continue the same library to additional drives? How do I specify multiple locations for the same library?

    To add to Roddy's post I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
    This lets me edit several sites and only republish the one I want.
    OT

Maybe you are looking for

  • Apple printed someone else's pictures in my book

    Has anyone seen this happen? After carefully assemblying your book, and creating a pdf file to triple check it, Apple prints a book that mixes someone else's order with your own? This is what happened to me. My printed book starts with someone else's

  • Query created in which system

    Hi All, How to find out the query created in which system like Dev or ACC or Prod. For ex. I want to find the queries directly created in Production.

  • RoboHelp 10 For WORD IE10 & IE11 Windows 7 Word 2010 Display Problems

    I have applied fixes from Adobe for Blank Topic Panes in IE10 and a blank TOC in IE11. The instructions indicate the fixes should be made in folder RoboHTML which I have done with no solution to the problems. I am wondering if I should apply the Adob

  • You do not have enough access privilages.

    Here's the deal. I downloaded an app where I can download ringtones, textones, etc. and make my own. I download some text tones and ringtones that I like and when I try to add them to iTunes I get a message saying "You do not have enough access privi

  • Java in odi

    hi , i have some questions a) How can i use a third party jar file in kmodule? b) How do i import java package in kmodule such as import java.util.*; is there any documentation for this? Thanks.........