Can there be multiple ASM instances on single node?

Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM

...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob

Similar Messages

Multiple ASM Instances on single node

Hi All,
After going through some threads it seems to me that multiple ASM instances on a node is not supported and recommended by ORACLE but i coudn't find any ORACLE document or support matrix mentioning this. Can any one give me a pointer to this. Please correct me if i am wrong and Multiple ASM instances are fully supported by ORACLE.
Thanks,

Multiple ASM instances on a single node are supported but not recommended due to several issues you could encounter during that kind of configuration.
Possible interraction between those instances for identification of each disk area usage,each disk area permissions , database instance to asm instance mapping and so on, could result in unwanted behaviour, as ASM is in some way just oracle's representation of LVM.
Intention is that any kind of distinction/separation of oracle related data under the ASM should be done through the disk groups.
So it seems it would be better to apply this kind of logic rather than doing suspiciously magical and rare configurations that could bring you similiary strange and unexpected problems.

Multiple ASM instances using single cluster install - Is it possible??

Hi,
I have 2 node RAC cluster installed on Linux. All the storage is on EMC. I need to setup another environment using HP storage on the same hosts. Is it possible to created second ASM instance using the same cluster install?? I wanted to have clear separation b/w EMC and HP environments and that's wondering if it's feasible to do that.
Haven't tried it yet to see if it complains.
Thx
Anitha

Anitha,
The data migration won't happen (at least not aggressively) until you do step 2 in your list where you remove the EMC disks. That removal operation will take a long time as Oracle will have to move the data before it can complete the operation. If you want to be sure, I'd recommend creating a new disk group with one of your new disks, put a small tablespace in it, create some data in it, then add a disk to that new group and remove the original disk. Then you'll have some confidence in the procedure and verify that it works without risking your production data. After you test, you can drop the disk group and use the disks for their intended purposes.
To answer your question, yes, that's the process exactly as I suggested it above. Should work fine--but will probably take a while to do the remove, so be prepared to leave that running for quite a while (i.e. don't expect to close the terminal and go home right after running the remove).
Dan

Can there be multiple contributors on a single course?

We are wondering if there can be more than one instructor on a course. Any thoughts?

Hi,
I believe that what you need is to simulate several CAN ports. There is a similar discussion form that I believe will answer you question. I hope this helps.
Regards
Krista S.
Applications Engineering
National Instruments

Multiple ASM instances on a single node

Can i have multiple ASM instances on a single node? This is to have each instance supporting different environment dev,stage etc
Thanks
Sannidhi

I had been discussing the same issue with someone from Oracle. I asked for multiple ASMs on a server so that we could have seperate ASMs running for, say, 10g and 11g.
He explained that we should think of ASM as being the same as Veritas FileSystem. We don't run multiple instances of Veritas on our servers. On single Veritas "instance" (set of drivers) provides all the Veritas Fx mountpoints on the server. Similarly, there should be only 1 ASM instance on a server.
(substitute UFS or ZFS or CFS for Veritas in the above example and you still have only 1 filesystem manager on a server providing one type of filesystem, although you could have, say , UFS and Veritas co-exist ; just as you could have Veritas, ASM and Raw co-exist on a server).
Hemant K Chitale
Edited by: Hemant K Chitale on Sep 29, 2009 11:50 AM

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

Can I have multiple TFS instances use a single SSRS installation

Can I have multiple TFS instances use a single SSRS installation?
Thanks

Hi Kim,
According to your description, you have multiple TFS instances using one Reporting Services instance. Right?
For installing TFS, to use a named instance with Team Foundation Server, you must install SQL Server by using a named instance, or move or restore Team Foundation Server data to a named instance, or create a team project collection on a named instance. Please
refer to the link below:
Work with SQL Server Named Instances
Reference:
Understanding SQL Server and SQL Server Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Can there be multiple accounts on one id?

can there be multiple accounts on one id?

Unfortunately you can't do the logical and convenient thing of authorizing a computer with multiple Adobe IDs that are active simultaneously.
You can authorize accounts from different vendors; one account per vendor.
If you have multiple operating system users set up on the computer, you can register different OS users as different Adobe Account users.

Can there by multiple accounts under one id? I just loaded a $25 gift card and it showed up in my balance. My daughter, under the same id had $12.0 left from a previous gift card. Now only the $12.01 shows up and the $25 is nowhere to be found?

Can there be multiple accounts under one apple id? My daughter and wife apparently share an id between my daughter's ipod and my wife's ipad. My daughter has what she believes is her $12.01 left from a gift card. My wife loaded a $25 gift card recently (I saw the $25 balance in her account when she was done) and after a password change, now all that shows up is the $12.01?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Multiple Database Instances on Single Server and effect of NLS_LANG

What is the effect of the NLS_LANG registry setting on a Windows server that is to host multiple database instance each created with a different database character set ? The server needs to support data in the following languages : Thai, Chinese Traditional, Chinese Simplified, Vietnamese and Korean. Selecting the Unicode character set(AL32UTF8) is not an option since the application is not Unicode complaint.
My understanding is that as long as NLS_LANG is set correctly on the client connecting to the particular database instance then the data will be stored correctly - is this correct ?
What should NLS_LANG be set to on the server if there are multiple oracle instances with different character sets ?

My question is not in relation to connecting to the database on the server itself but with regards to client connections. What I need to know is what is the effect of the NLS_LANG setting in the registry on a server that has multiple databases each created with a different character set ?
Say for instance, the server has two databases - one created with the character set ZHS16GBK and the other created with the character set JA16SJIS and NLS_LANG is set to SIMPLIFIED CHINESE_CHINA.ZHS16GBK in the registry on the server. Will Japanese data that is inserted into the database that has character set JA16SJIS be stored correctly when it is inserted from a client with NLS_LANG set to JAPANESE_JAPAN.JA16SJIS even though NLS_LANG is set to SIMPLIFIED CHINESE_CHINA.ZHS16GBK on the server ?

Can I add multiple elements on a single line?

Can I add multiple elements on a single line?

Not yet. But this is something we plan to support. You can vote on this idea here: http://forums.adobe.com/ideas/1046
We use this to help prioritize our work.
Randy

Can you have multiple libraries on a single iPod?

Can you have multiple libraries on a single iPod?

Yes. This explains how >
Using iPad or iPod with Multiple Computers: http://support.apple.com/kb/HT1202
Note: You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.

How can i scan multiple pages in a single file in pdf.

How can i scan multiple pages in a single file in pdf using 1536 dnf.

Hi @veerendrajain ,
I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can we save multiple IDocs as a single Flat file in R/3 system ?

Hi,
How can we save Multiple Idocs as a single Flat IDoc in R/3 (Not xmlized)
Kulwinder

Hi,
Check this link for Mutiple IDOCs into single File.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Regards,
phani
Reward points if Helpful:)

Can we combine multiple data sources in single report?

<span style="font-size: 10pt; font-family: Verdana">Can we combine multiple data sources in single report?</span>

If you can't do this at the Metalayer (BVs or Universe) - then subreports and shared variables are the method for CR to use multiple datasources in the same report.

Can there be multiple ASM instances on single node?

Similar Messages

Maybe you are looking for