Can there be Org units under positions?

Hi guys,
Please let me know how to create Org units under positions
Thanks
Deepali

Deepali,
Standard SAP configuration for PPOME transaction does not allow you to create or units under positions.
If you want to do so, you need to carry out the following configuration settings:
1. Goto table T777E via SM30, select 003 relationship, double click allowed relationships from the menu on the left hand side.
2. In the table add the following entry:
S B 003 Incoporates O
3. Goto table T778A via SM30, select evaluation path SBESX, double click evaluation path(individual maintenance) from the menu on the left hand side.
4. In the table add the following entry:
98 S B003 Incorporates * O
1. and 2. steps are carried out to allow the relationship "Incorporates" between position - org unit.
3. and 4. steps are carried out to allow the maintenance of this relationship via PPOME transaction.
Please before doing these configurations make sure that assigning an org unit under a position is logical for your org structure and "Head of org unit" does not solve your requirement.
Good luck,
Dilek

Similar Messages

Org Unit Under Position

Hi,
Can we create an org unit under a position (other than chief position)
Eg: GM will be the top of the Company, under GM different departments, is it possible in OM..?
I would appreciate your help. Thanks!
SD.

Hi SD,
Functional units are reprseneted in OM.Please check allowed relationship per object type.tcode OOIT..Org units and Position relationship can be assimilated using this.
please check T778T,T777E(Table T777E contains all the relationships permitted between organizational objects)
Table T7791 contains information about which SAP organizational object types should be linked with positions, which with jobs and which with organizational units.
objects and relationships are building blocks of OM(1000 and 1001)
please refer to the below link for more details
https://cw.sdn.sap.com/cw/docs/DOC-39190
Hope this helps.
No Worries
KG

Creating countries - Move Org unit its positions to another country code

Hi Gurus,
The client used a single production server for all the countries under its one country grouping(10) for different countries (US, Malaysia, Sinagapore, China, India, UK).
We have only one country code for all the OM.
One Organizational unit needs to move to another country(39), of which all positions, jobs, and the employees assigned to it also needs to move with the Org unit to new country. We are going to change the PA PSAs as well to new country groupings
Is it possible, and if possible how to do it?
thanks in advance....

Hi Kumar,
As already stated by you change the PA and PSA's accordingly as per the new country groupings as PA's should be assigned to company code within the same country grouping.
In my knowledge I dont think you need to change anything with the Org Unit as OM objects don't refer to any country groupings as such. If you are using the account assignment infotype ( IT 1008) then you will have to change the Company code to your new company code as your new company code will have different country grouping ( 39).
Your FI CO objects like Cost centers can be changed to new cost centers as per your requirement from the date you move your Org Units or Positions to new country groupings.
We can also wait for other expert comments.
cheers
Ajay

Changing personnel area/subarea (IT1008) from org unit to position

We are live with PA and Org. Mgmt, but have been advised to change the infotype 1008 data - personnel area and subarea to be stored on the position instead of the org unit (where we have it now). A big reason for this is we have cases when we need to overwrite the personnel subarea at the position level. For example, a position belonging to an org unit with subarea ABCD, may really be in subarea WXYZ. Therefore, even though the org unit is ABCD, it will be overwritten at the position level to WXYZ. My understanding is that the RHINTE30 program will not work approrpiately if we are maintaining the data this way.
In transaction PPOME there is an account assignment tab on the org unit with cost center (filled in) and personnel area/subarea (which will be blank moving forward since that data won't be maintained on the org unit). Then, there is also an account assignment tab on the position with cost center inherited from the org unit (sometimes needing to be overwritten at the position level), and the personnel area/subarea data. My question is how should I handle the view of PPOME for this data? Can I hide the personnel area and subarea on the account assignment tab for the org units only so it is not confusing for the users? The problem with having it this way is that personnel area and subarea are blank on the org unit and filled on on the position. They are conflicting and both visable/maintainable to the User. Any advise please? Thanks!

Hi Nish,
I gave you my input on your other related message and now will go for this one.
As I commented on the other message, RHINTE30 will not integrate infotypes 1008 and 1013. So you don't have to worry about using this functionality (first part of your message).
On the second part (personnel area / subarea on position rather than org unit): there are some considerations here that are more functional / process driven than technical. From a technical point of view, everything can be done. You can hide data from infotype 1008 on the tabstrip for your org. unit using dynpro handling, even via customizing. You can even transfer the data from infotype 1008 on the org. units to the positions or delimit it on the org units. There are some quite easy ways of achieving this using the LMSW tool (have you used it? I can forward some documentation).
But personally, I would not recommend to do this from a process point of view. Everything in SAP HR is about the inheritance concept, and I think this works very well when it comes to org. units and positions. It is normally advisable to record personnel area / subarea on the org. unit level. This will be inherited by positions (even if you cannot see it at position level in PPOME) and thus defaulted for the employee. At position level you should handle only the exceptions, which will be in turn also defaulted for the employee holding the position. In this way, data maintenance is minimized. If you delete (or do not use from now on) information about infotype 1008 on org. unit level, your HR department will have to maintain this every time a position is created, and even in cases in which a position is shifted from one org. unit to another one.
In my opinion, you should address this with your HR department and explain the concept and the consequences of maintaining all at position level. It would only be advisable to do it if the org. unit structure is very cross-personnel areas and subareas. If it is a matter of handling exceptions, again, I would recommend to continue recording this data at org. unit level. All in all, if the data is not recorded on the position and you need to see which is its personnel area, you just need to double-click on the org. unit above.
Just wanted to let you know my opinion, of course it's your decision. By the way, I'm of course not aware of other possible implications like home-developed reporting and so on.
Regards,
Rodrigo

Can there by multiple accounts under one id? I just loaded a $25 gift card and it showed up in my balance. My daughter, under the same id had $12.0 left from a previous gift card. Now only the $12.01 shows up and the $25 is nowhere to be found?

Can there be multiple accounts under one apple id? My daughter and wife apparently share an id between my daughter's ipod and my wife's ipad. My daughter has what she believes is her $12.01 left from a gift card. My wife loaded a $25 gift card recently (I saw the $25 balance in her account when she was done) and after a password change, now all that shows up is the $12.01?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Creating org unit under group???

We are running SAP CRM 7.0.
I am fairly new to SAP and CRM in general.
I was trying to create a BP (Business Partner). I would of thought a group entailed a major division such as say "FORD MOTOR COMPANY" and within that all the organzations for FORD such as all the sites imagine the following:
FORD MOTOR COMPANY
   - FORD DETROIT
   - FORD LOS ANGELES
Etc.
However when I create a "Group" in transaction BP and save it I can see this as a group. Now when I create an "Organization" how do I Relate this organization back to the major group? I see a groupping drop down in transaction BP but that does not list the Group Ford that I just created. How can I Relate this organization to the group?
Finally my second question is can we create a group within another group say something to this effect:
FORD MOTOR COMPANY (Group Level 1)
   - FORD AMERICA (Group Level 2)
        -Ford Detroit (org unit)
        -Ford California (org unit)
   -FORD GERMANY (Group Level 2)
        -Ford Bremen
   -FORD BRAZIL (Group Level 2)
        -Ford Rio De Janerio
How can I establish this structure if I cannot relate these? Please I am new to CRM so if you can provide detailed information...
Thanks so much!

Hi SD,
Functional units are reprseneted in OM.Please check allowed relationship per object type.tcode OOIT..Org units and Position relationship can be assimilated using this.
please check T778T,T777E(Table T777E contains all the relationships permitted between organizational objects)
Table T7791 contains information about which SAP organizational object types should be linked with positions, which with jobs and which with organizational units.
objects and relationships are building blocks of OM(1000 and 1001)
please refer to the below link for more details
https://cw.sdn.sap.com/cw/docs/DOC-39190
Hope this helps.
No Worries
KG

Missing Org unit from position ID

Hi Gurus,
Could you please provide additional information which I have missed out that would help resolve the issue.
Problem Statement:
Position ID XXX originally belongs to O XXXXXXXX [Sample Org 1]. When HR Recruitment administrator performed action to move structure reporting to another O YYYYYYYY [Sample Org 2], the record went missing as the action done was CHANGE instead of COPY. This had caused two ex-staff showed no Cost Center & Org Unit. Now, user is trying to reinstate S XXX to O XXXXXXXX [Sample Org 1] but is prompted with an error message - Company code cannot be determined for cost center 52222.
Action Taken:
1. Checked S 5111111 and found that it is currently under O YYYYYYYY and currently occupied by P 123456 (validity period is from 01.11.2010 to 30.04.2011)
2. Checked account assignment of S 5111111 to confirm the company where it is assigned to. It reflects that position inherited attributes O YYYYYYYY [Sample Org 2] to which the position is currently under
3. Checked account assignment of O YYYYYYYY it only contains the controlling area which is TTTT. I then checked IT0001 of the current employee who is holding the position and company code reflecting is CCC.
4. Checked account assignment of O XXXXXXXX where they want to reinstate the position and it only contains the controlling area which is TTTT and master cost center is 52222. I checked one employee under the said Org to verify to which company it is currently under and found that it is the same, CAT. At this point, I do not see any issues as to why it is not allowing them to create A003 rel to O XXXXXXXX .
Note: I was not able to replicate the error since it is working fine in dev given the same scenario.
Findings:
The only thing that I can see is on the validity date. If they are to reinstate the position to where it has been originally assigned which is under O XXXXXXXX [Sample Org 1], it should not overlap with current record since there is somebody occupying the post. If it does overlap then it will automatically delete the existing record.
In addition, I have managed to check transaction S_AHR_61016528 (B011 eval path) and found validity period of cost center to O XXXXXXXX is 01.04.2002. If user is trying to establish A003 rel for S 5111111 and validity period used is 01.01.1997. Would that matter why user is getting the said error. I have tested and was able to create rel successfully.
Would appreciate if you guys could share how else the position can be reinstated to the old org unit.
Thank you.

Hi Gurus,
Could you please provide additional information which I have missed out that would help resolve the issue.
Problem Statement:
Position ID XXX originally belongs to O XXXXXXXX [Sample Org 1]. When HR Recruitment administrator performed action to move structure reporting to another O YYYYYYYY [Sample Org 2], the record went missing as the action done was CHANGE instead of COPY. This had caused two ex-staff showed no Cost Center & Org Unit. Now, user is trying to reinstate S XXX to O XXXXXXXX [Sample Org 1] but is prompted with an error message - Company code cannot be determined for cost center 52222.
Action Taken:
1. Checked S 5111111 and found that it is currently under O YYYYYYYY and currently occupied by P 123456 (validity period is from 01.11.2010 to 30.04.2011)
2. Checked account assignment of S 5111111 to confirm the company where it is assigned to. It reflects that position inherited attributes O YYYYYYYY [Sample Org 2] to which the position is currently under
3. Checked account assignment of O YYYYYYYY it only contains the controlling area which is TTTT. I then checked IT0001 of the current employee who is holding the position and company code reflecting is CCC.
4. Checked account assignment of O XXXXXXXX where they want to reinstate the position and it only contains the controlling area which is TTTT and master cost center is 52222. I checked one employee under the said Org to verify to which company it is currently under and found that it is the same, CAT. At this point, I do not see any issues as to why it is not allowing them to create A003 rel to O XXXXXXXX .
Note: I was not able to replicate the error since it is working fine in dev given the same scenario.
Findings:
The only thing that I can see is on the validity date. If they are to reinstate the position to where it has been originally assigned which is under O XXXXXXXX [Sample Org 1], it should not overlap with current record since there is somebody occupying the post. If it does overlap then it will automatically delete the existing record.
In addition, I have managed to check transaction S_AHR_61016528 (B011 eval path) and found validity period of cost center to O XXXXXXXX is 01.04.2002. If user is trying to establish A003 rel for S 5111111 and validity period used is 01.01.1997. Would that matter why user is getting the said error. I have tested and was able to create rel successfully.
Would appreciate if you guys could share how else the position can be reinstated to the old org unit.
Thank you.

Reports to check what org units or positions linked

Hi,
I want to run a report for 2000 positions and check
which positions are linked with which other positions
and which positions are linked with what other

hi,
sap provide the two types of relationship for a objects ,
A -
BOTTOM TOP
B----
TOP DOWN
for position to position ( A position reported to another position A|002 where 'A' is bottom up relation and 002 is infotype ( reports line to )
position is the line manager of another position B| 002 where the 'B' is top down relation and 002 is infotype .
position manages an org unit A |012
an org unit is managed by position B|012
report is HRP1001,
RupaPrasad

What are the infotypes should i maintain for org units and positions in om. and how can i see positions under org units.

can anyone help me

Hi,
It is depends on your requirement. compulsory info types are 1000 1001 1002 1003 1008 1018....
go to pp02 and click on F4 option in IT field and Subtype field.
Example:
1000
Object
1001
Relationships
1002
Description
1003
Department/Staff
1004
Character
1005
Planned Compensation
1006
Restrictions
1007
Vacancy
1008
Acct. Assignment Features
1009
Health Examinations
1010
Authorities/Resources
1011
Work Schedule
1013
Employee Group/Subgroup
1014
Obsolete
1015
Cost Planning
1016
Standard Profiles
1017
PD Profiles
1018
Cost Distribution

Can cost center / org unit assignment be done @ Position level?

NW
Edited by: NW on Jul 17, 2009 2:29 PM

Technically, I don't see why not. However, it would probably be much more cumbersome to maintain at position than at org level. Also, a new hire ee would have to be assigned to an org, but may be assigned to a dummy position earlier on. This would mean there's more risk for IT0001's record not to have cc populated . It's just my 2 cents.
Rgds.

Report to check org units without any position display

Dear All,
I want a report which i can see only the org units in a graphical way. When i am checking through Simple maintainence mode I am getting org units along with positions also with in the graphical mode i have selected the view option under options menu there can able to see individual departments along with positions.
My request is i want to see the organization structure along with sub org units under sub org units with departments without positions. please let me know is there any standard reports available.
Regards,
HR user

Yes, the Report is
S_AHR_61016493-Organizational Structure-Organizational Structure
Select the first line and press F8

Assiging a position to Org Unit in mass upload

Hi,
I am creating Org units using PPOM transaction where i can create Many org units at a time. NOw i need to assign positions to these org units? is there any way to mass upload positions and assign to these Org units?
I have arrount 1020 Org Units to create. I created all through PPOM at a time. But to assign positions, i have to navigate to each Org unit to assign a position. Is there an easy way for this? I mean Create an Org unit and create a position at t the same time.
PS: This is for mass creation.
Regards,
Jithin.

Create one LSMW program. Do the recording through PP02.
Here the values will be:
Plan Version : Whatever u have created or 01
Org Unit Id:
Infotype : 1001 (Relationship)
Subtype: A003/B003 (belongs to/ incorporates)
Start Date
End Date
Planning Status : 1
In the next screen :
Type of Object Type : S ( in ur case)
ID of Object Type
You need to upload data in following fields
1) PLVAR
2) OTYPE
3) SEARK
4) INFTY
5) SUBTY
6) ISTAT
7) BEGDA
8) ENDDA
9) SCLAS
10) SOBID

Assigning a position to Org Unit in mass upload

Hi,
I am creating Org units using PPOM transaction where i can create Many org units at a time. NOw i need to assign positions to these org units? is there any way to mass upload positions and assign to these Org units?
I have arrount 1020 Org Units to create. I created all through PPOM at a time. But to assign positions, i have to navigate to each Org unit to assign a position. Is there an easy way for this? I mean Create an Org unit and create a position at t the same time.
PS: This is for mass creation.
Regards,
Jithin.

write a LSMW or BDC on PP01 or PO13 and create the position - Org unit relationship ( A 003)
cheers
AJ

MSS - Creating new Position and Org unit in MSS

Dear Expert,
Question 1: I want to know that is it possible to create a new Position or Org Unit in MSS. I am aware that manager can create a requisitioin for a position. But I am not aware that how HR manager will create the Org Unit or Position thourgh MSS.
- will the HR manager have a new HR administrator Role to do this activity, if yes, which service / iview is used.
Question 2: We are using Management of Global employees (MGE). Now if any employee expariate to a foreign country how does ESS/MSS will pick the new country assignment. Is there any ess/mss switch for this? or any other configuration
Question 3: I would like to know what are the main differences of EHP4 and EHP5.
thanks
honey

Hello honey - answer to the 1st question.
MSS- click Organisation - Search Organisational Process - enter the Process HR_PD_CREATE_POSITION and click start , this could be one solution how the managers may be able to create new position through MSS.
Regards,
Regi

How to copy the positions and their relationships of one org.unit to other

f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.

Hi.
This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
Hope this helps

Can there be Org units under positions?

Similar Messages

Maybe you are looking for