Can there be several Sieve rules for the same match?

Following up with my other question, here's a more specific one: can I have several working Sieve rules matching the same attribute values? Or does processing stop on the first match?
Also, is there supposed to be a toggle/flag that specifies whether a certain rule should be the "last" (if it matches, whether to abort processing or to do whatever action specified in this rule and go on to the next rule).
I believe it is possible to write up complex Sieve scripts and save tehm to LDAP, but that's not so user-frienfly for just anybody to do ;)
So the main usecase for this question concerns the Sieve rules defined by a user in his or her Options tab.

JimKlimov wrote:
And how exactly does fileinto work? Does it happen once or more?Multiple fileinto actions to different folders results in a "copy" of the email in each folder, e.g. if I use a filter which has fileinto "Inbox", fileinto "Sent", fileinto "Trash", I get the following logged:
24-Jul-2008 09:49:42.67 ims-ms                    D 1  rfc822;[email protected] shjorth+Inbox@ims-ms-daemon mailsrv  ''
24-Jul-2008 09:49:42.67 ims-ms                    D 1  rfc822;[email protected] shjorth+Sent@ims-ms-daemon mailsrv  ''
24-Jul-2008 09:49:42.67 ims-ms                    D 1  rfc822;[email protected] shjorth+Trash@ims-ms-daemon mailsrv  ''I say "copy" because each email is actually a hard-link so the storage usage from the 3 copies is actually the email size + size of two hard-links. So for the email above, these were the messages on disk:
Inbox:     613067 -rw-------   3 mailsrv  mail         591 Jul 24 09:49 124.msg
Sent:      613067 -rw-------   3 mailsrv  mail         591 Jul 24 09:49 11.msg
Trash:     613067 -rw-------   3 mailsrv  mail         591 Jul 24 09:49 122.msg613067 is the inode number which as you will note is identical across the messages on disk.
From the RFC I infer that it should happen once for any one folder, but that probably doesn't mean one filing for the whole mailbox, right?Correct.
If I have "rule1" which files some messages into a folder (without a "stop;"), "rule2" which forwards emails, and "rule3" which files all messages to the inbox, am I supposed to still get cloned messages (inbox and subfolder)?If all three actions are performed, yes.
Regards,
Shane.

Similar Messages

  • I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

    I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

    . Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
    Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
    See:                  Keywords or ratings are applied only to one of the selected images - why?
    Uncheck the little square button with the "1".

  • Can I have diff transacton Variant for the same tcode?

    Hi Experts,
    Can I have diff transacton Variant for the same tcode? If so i will i assign it to diffrent users.?
    Requirement Details:
    I have three diiffrent roles accessing XK02.
    I need to provide diffrent transactions variants for these 3 roles, through Variant groups. How will i do this?
    When i tried to do this, i found that, we need to activate a standard variant for the transaction, which inturn will be default for all these roles. S how will i specify different Transaction variant for diff  roles...
    Please help..
    In the below link i have seen a solution where i need to login into each users profile and set it.
    link: [Variant Groups;
    Thanks,
    Jithin

    >
    jithin james wrote:
    > Say i have two groups for the same transaction with two diff variants,
    > then for group 1 i will assign  variant1 and will activate this as the standard variant.
    > NOw for group two, i will assign my second variant (without activating it as standard variant).
    The way you explain is strange, I don't understand. You can't assign manually a variant group to a transaction variant, this is done automatically based on the names, maybe you make confusion with assignment between variant group and user?
    A little example:
    Say we have : ZG1 for group 1, and ZG2 for group 2. Transaction is ZT.
    Say user is assigned to group ZG1 by default, and also ZG2 (he may switch to ZG2 using the transaction I mentioned above)
    When user runs ZT transaction, SAP uses automatically ZG1ZT transaction variant (the standard variant is ignored when a transaction variant is found based on variant group). If the user switches to ZG2 variant group, SAP uses automatically ZG2ZT transaction variant.
    If you activate a standard variant, this will taken into account for users which don't have a variant group assigned, or those which transaction variant doesn't exist for variant group + transaction code.
    If it doesn't work as I said, maybe there is a bug, check SAP notes...

  • Upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

    upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

    You can upgrade the iMac for no extra charge - sign into the App Store there, download and install 10.8.
    I recommend that you make a backup (Time Machine is probably the easiest method) before you install, and make sure that you are not using any applications that are incomptible with 10.8 (eg Office 2004) - other than that, it should go smoothly.
    Matt

  • Several browser background for the same website

    I am currently designing a photo website which has several parts for the different "themes" and "countries" of my pictures. I want each of these themes to have a specific browser background, but it seems everytime I download one browser background it erases the other ones (show up as white). Is it possible to have several browser backgrounds for the same website ?

    Dear Ramakanth,
    In material master  "Availability check" is already set to "02 - Individ.requirements"
    It doesn't solve the problem. Aren't there any otherway to achieve this requirement??
    Regards,
    Madhushuika

  • Can I have multiple iTunes accounts for the same Ipod?

    Can I have multiple iTunes accounts for the same Ipod? What I mean is can I use multiple iTunes accounts through the same iPod for buying stuff?

    I believe you're limited to syncing DRM'd items from 5 different accounts.
    tt2

  • Can we create two dashboard prompts for the same column in the samepage

    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideas

    863997 wrote:
    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideasYou are correct. You cannot build two prompts on the same column. Use this link for instructions on how to build a "between prompt" because of this fact:
    http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/

  • Using addresses, can you print duplicate mailing labels for the same address

    using my address book, can I print duplicate mailing labels for the same name and address. 

    I checked the Address Book Print Dialog and I did not see the option to duplicate a single label.
    The only thing you could try is to select the name in your list. Then do Command-P to print which should get you to this dialog box:
    Try changing the # of copies and see if that does what you want. Otherwise I'm not sure and your answer may best be found in the Address Book forum on here.
    You may not want to incue the expense but Microsoft Word will do what you want.

  • I have only 1 ipad device, can I create 2 icloud accounts for the same ipad?

    I have only 1 ipad device, can I create 2 icloud accounts for the same ipad?

    Of course.
    To create the first iCloud account, open Settings > iCloud, type your Apple ID and follow the steps to set up iCloud.
    Then, to add a second iCloud account, open Settings > Mail, Contacts & Calendars > Add Account > iCloud, type the second Apple ID and set up iCloud for this Apple ID.
    Note that one iCloud account will work as the primary account and the other one as the secondary account. See > http://support.apple.com/kb/TS4020

  • Select several CSS classes simultaneously (Was: how select several css rules at the same time ?)

    Hi !
    I have Dreamweaver 8
    I've tried to select several css rules at the same time to create a css style sheet but i don't know how to do it !
    This man do it in this video at 3:00
    http://www.youtube.com/watch?v=ZbQ3GTFC-o0
    Thanks !

    DW8 doesn't support the selection of multiple classes in the properties panel.  I'm pretty sure that feature didn't appear until the release of CS6.  Unless you upgrade to CS6 or CC, you must do it manually in your  code.
    Nancy O.

  • Hello Experts., I would like to use only Lightroom but current set up by Adobe will force me to get Photoshop along with Lightroom. Is there any way where I can get only Lightroom and pay for the same.

    In the present set up by Adobe if one need Lightroom alone, they have to get and pay for Photoshop also Which I am not interested. Is there any way I can get only Lightroom.? Please help.

    Just for clarity, the strict answer to your question is "no": you can't get just Lightroom for the same price as the Lr/Photoshop Creative Cloud (CC) bundle.
    You can buy a stand-alone licence for Lightroom alone - that's what Don and Elie have helped you to find - but the pricing (and licencing) arrangements are entirely different to those which make up the CC bundle.
    Note too, it's likely that Lightroom 6 will be coming before long (although how long is not known): you will almost certainly have to pay for the upgrade to Lr 6 if you're on a stand-alone licence, whereas moving from 5 to 6 (and to 7 and to...) is included in the price of the bundle.

  • Can I print several different pics of the same size on one shee  of papert?

    Hi,
    I should like to print a group of several different pics of the same size & resolution on one sheet of (A4) paper eg 6 family photos. There doesn't seem to be a template for this - just two choices of format (both with one large and a few smaller format) and there is no 'Printer' pop up menu.
    I tried to laboriously copy pics to a two column works word processing document (after resizing in a different one so that they would fit in the columns). This is time consuming and when down sizing the pics lose resolution!
    Maybe I can download templates somewhere on the apple site as suggested by apple care but I couldn't find out where. Maybe there is a possibility of doing some contact prints?
    Any help much appreciated - many thanks - John

    Select the 6 photos you want printed in the iPhoto Library or Album window.
    Choose File->Print.
    In the Print dialog box, Select the paper size in the Paper popup menu.
    In the Style popup menu, select N-Up.
    In the Photos per page popup select 6.
    The preview should show what you'll get. I hope its what you wanted.
    Message was edited by: Thomas Emmerich

  • Same material can exist on multiple line items for the same order.

    Hi
    Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
    Regards

    No.
    But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
    Eawar Ram
    http://www.parxlns.com

  • [JAXB] Several different prefixes for the same namespace

    Hi!
    I have generated some code from 2 schemas using JAXB. One of them (the main) defines some elements and the other one defines values for those elements. Then, when runring my code, I get an XML document with elements from the main schema an elements from the other one. However, elements from the second schema are qualified with different names. That is:
    <party>
    <ns3:uid xmlns:ns3="http:/schema1.com/schema1">CN=User1 - RSA/RSA,OU=IAIK,O=TU Graz,C=AT</ns3:uid>
    <ns4:role xmlns:ns4="http:/schema1.com/schema1">client</ns4:role>
    </party>
    As you can see, I get two different prefixes for the same namespace.
    Could you be so kind as to tell me if there is a way of getting only one prefix for each namespace, please? Do I have to modify JAXB compiler's properties???
    Thanks a lot in advance.

    No, I don't know how to do that. I also don't think it should matter. Are these multiple prefixes causing you any problems other than offending against Occam's Razor?

  • How to set the default settment rule for the same kind project.

    hi experts:
       the project of the same kind of the project profile have the same settment rule to one account (G/L).
    how to set the default settment rule for the project of  this kind of the project profile.
    regards

    Hi,
      You need to define the settlement profile and allocation structure.
    next you need to define the  Strategy for settlement rule.
    navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
    --> Define strategy for settlement rule.
    Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
    Save this transaction.
    Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
    Now run CJB2 transaction for the project, settlement rule will generated automatically.
    even you can configure the same for profitability segment.
    Rgds
    Sudhir Reddy

Maybe you are looking for