Can there be two Admins on the same network?

A quick question:
Our plant has a network that stretches across the US,
and currently all our Macs ( 40+) are on it.
I am the admin for one region ( 30 or so macs),
and we are looking
to setup another admin in another region (10 or more macs).
We have one seat of RD on my machine running now.
if we buy a second, will there be any conflicts?
Any issues?

You can have multiple seats of the ARD admin application running simultaneously without problems, particularly if you plan to split the workstations into multiple groups as you indicate. Though I've not had more than one admin running at the same time a lot, I've never encountered any issues when doing so.

Similar Messages

How can I connect two macs in the same network?

Both are connected to the same network. One via ethernet and the other via Wifi (Airport Extreme). Both share the same Internet conection. I have followed instructions for files sharing. I can access only the computer linked to my home network via ethernet, but not the other way. It does not found the server address provided in file sharing by the computer conected via Wifi. Any clue? Can it be that the IP address of the Wifi conected is DCHP?

Are you using Connect to Server or Shared sidebar in the Finder? What OS X versions do the two machines run?

Use two interfaces on the same network

Hello every one,
I actually starting to work on a cisco project. I'm a beginner on networking and cisco technologie.
For my project we use a router 2921.
We got two network:
- Network A: 192.198.0.X / 255.255.255.0 / Gateway 192.198.0.1
- Network B: 162.168.0.X / 255.255.0.0 / Gateway 162.168.0.1
Each network use switch, Switch A (connecting to network A) is connected to interface G0/0.
And Switch B (connecting to network B) is connected to interface G0/1.
Router well configured as:
- G0/0: ip address 192.198.0.1 255.255.255.0 (network A)
- G0/1: ip address 162.168.0.1 255.255.0.0 (network B)
Every think working fine.
The problem is with this one, we need to connect a computer on G0/2. This computer is configure as network A (192.198.0.10 / 255.255.255.0 and same gateway).
I can't configure G0/2 as 192.198.0.1 255.255.255.0 (network A), cause G0/0 use this adresse.
I can't put this computer on the switch A, my only physical possibilité is to connect him on G0/2.
We just need to use interface G0/0 and G0/2 as a switch on the router with the same gateway (192.198.0.1)
How can i connect this computeur? How can i configure two interfaces on the same network and same gateway?
Thanks you

I would just put the PC on a different network, but if you really want it to be in the same network, you could use IRB to connect two of the interfaces on the router at layer 2.
Here is an example config for IRB:
interface FastEthernet0/0
bridge-group 1
interface FastEthernet0/1
bridge-group 1
bridge irb
interface BVI1
ip address 192.168.0.1 255.255.255.0
bridge 1 route ip
Notice that the physical ports do not have IP addresses on them, the IP for the subnet is on the BVI interface.

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Can you have two iPods on the same account

I have an Itouch and an old classic that I want to load different music on. Can I have two ipods on the same account? Thanks

I have a iMac, MB Pro, iPad 1, iPad 2, iPad Mini, iPod 4th all on the same iTunes account. Is that what you mean?

How can I make two copies of the same picture one with my watermark and one without for printing for clients?

how can I make two copies of the same picture one with my watermark and one without for printing for clients?

Export the photo twice, once with a watermark and once without a watermark.

Can I authorize two computers withe the same iTunes

Can I authorize two computers withe the same iTunes

Yes, you can authorize two computers with the same Itunes Account.

Can we assign two values to the same parameter? If yes how? For details ple

Can we assign two values to the same parameter? If yes how? For details please go through the following SAP related program.
Here I need to print 2 queries using the same parameter "QUERY" the value assigned to this parameter(query) is REPORT_TEST1. I want to assign one more value to this Parameter. Is is possible? This question may sound stupid if it is not possible please kindly reply.
I want to do this to print two documents(values) with a single command (parameter)
Anybody please help quickly,
Now, I have 2 tables from different queries. I have a print (HTML written) option in my WEB Template
JAVA PROGRAM:
<param name="QUERY" value="REPORT_TEST1"/>
function PrintReport(typePaper) {
document.title ='Report';
if (typePaper == "0")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('39') + '&qtitle=' + escape(document.title);};
if (typePaper == "1")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('52') + '&qtitle=' + escape(document.title);};
CurrentReportName += '&ASOFDATE=' + escape(AsOfLabel.innerText);
var openCMD='<SAP_BW_URL>';
openCMD += '&DATA_PROVIDER=REPORT_TEST1&TEMPLATE_ID=DPW_PRINT_PAGE&CMD=RELEASE_DATA_PROVIDER';
openCMD += CurrentReportName;
openWindow(openCMD,'MainTitleNow',800,600);
The data provider here is REPORT_TEST1. Now it only prints the corresponding data for the data proviedr 1 i.e., REPORT_TEST1. I have a second table whose data comes from the data provider 2 when i use this HTML to print I want the second table contents from the data provider 2 (REPORT_TEST2)also to be printed simlutaneously.
Please help.
THANX A LOT,
SRINI

Hi,
Try assigning two values seperated by a delimiter ( say '|') to the same parameter.
In the function get the parameter value and seperate the values using the same delimiter.
<param name="QUERY" value="REPORT_TEST1|REPORT_TEST2"/>
Regards,
Uma

Can we assign two values to the same parameter? If yes how?

Can we assign two values to the same parameter? If yes how? For details please go through the following SAP related program.
Here I need to print 2 queries using the same parameter "QUERY" the value assigned to this parameter(query) is REPORT_TEST1. I want to assign one more value to this Parameter. Is is possible? This question may sound stupid if it is not possible please kindly reply.
I want to do this to print two documents(values) with a single command (parameter)
Anybody please help quickly,
Now, I have 2 tables from different queries. I have a print (HTML written) option in my WEB Template
JAVA PROGRAM:
<param name="QUERY" value="REPORT_TEST1"/>
function PrintReport(typePaper) {
document.title ='Report';
if (typePaper == "0")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('39') + '&qtitle=' + escape(document.title);};
if (typePaper == "1")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('52') + '&qtitle=' + escape(document.title);};
CurrentReportName += '&ASOFDATE=' + escape(AsOfLabel.innerText);
var openCMD='<SAP_BW_URL>';
openCMD += '&DATA_PROVIDER=REPORT_TEST1&TEMPLATE_ID=DPW_PRINT_PAGE&CMD=RELEASE_DATA_PROVIDER';
openCMD += CurrentReportName;
openWindow(openCMD,'MainTitleNow',800,600);
The data provider here is REPORT_TEST1. Now it only prints the corresponding data for the data proviedr 1 i.e., REPORT_TEST1. I have a second table whose data comes from the data provider 2 when i use this HTML to print I want the second table contents from the data provider 2 (REPORT_TEST2)also to be printed simlutaneously.
Please help.
THANX A LOT,
SRINI

Hi,
Try assigning two values seperated by a delimiter ( say '|') to the same parameter.
In the function get the parameter value and seperate the values using the same delimiter.
<param name="QUERY" value="REPORT_TEST1|REPORT_TEST2"/>
Regards,
Uma

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

Can we buy two albums at the same time ?

Can we buy two albums at the same time ?

If by 'two' you mean different, 'albums' you mean books and 'at the same time' you mean in the same order, no. You can order multiple copies of the same book in one order, but different books require different orders.
Regards
TD

Can I shuffle two playlists at the same time?

How can I shuffle two playlists at the same time? Thank you.

You can only connect to one site at a time. And you need to edit files locally, save & then upload to the remote server. AFAIK, no single FTP app is capable of connecting to more than one server at a time. You might be able to do what you want with DW open and an additional 3rd party FTP client like Filezilla, each connecting to different servers.
Nancy O.

Can i run two widgets at the same time on the same page?

Can i run two widgets at the same time on the same page?
Hi
I have created and published 4 free ibooks and i would to run two widgets
- a countdown clock
- a review test
at the same time on the page. Can i do that?
Thanks in advance
Haris

thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
One solution i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
So, in order to have at the same widget and run together a count down clock and a preview test (20 questions) i must
1)"hack" the preview widget and insert a countdown clock
2) create a preview test using iAD.....
thanks again
haris

Can I call two numbers at the same time on facebook?

Can I call two numbers at the same time on facebook?

thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
One solution i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
So, in order to have at the same widget and run together a count down clock and a preview test (20 questions) i must
1)"hack" the preview widget and insert a countdown clock
2) create a preview test using iAD.....
thanks again
haris

Can I connect two apple tv on same network and same apple ID at a time ?

Can I connect two apple tv on same network and same apple ID at a time ?

Welcome to the  Discussion Forums.
Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though.

Can there be two Admins on the same network?

Similar Messages

Maybe you are looking for