Can this device host an external printer and storage device simultaenously???

WRT350N - Subject says it all, would love for it to be a print server in addition to sharing my external USB drive.
Message Edited by PASCONE on 02-26-2008 05:50 AM

Yes, but the printer has to be a network printer connected to the router using an ethernet cable.
The box said windows xp or better... So I installed Linux!

Similar Messages

Can this device be used as an external hard drive with a macbook pro laptop to use files on the airport?

can this device be used as an external hard drive with a macbook pro laptop and use files on the airport time capsule?

If you mean an AirPort base station other than the Time Capsule, it doesn't have internal storage.
If you mean a Time Capsule, its internal drive can be used for regular file storage but shouldn't be; as with all drives, it'll eventually fail. You're better off using a standalone drive and setting Time Machine to back it up as well.
(112309)

How to install Snow Leopard on Macbook Pro? keep getting msg- cannot install Internal HD is used for Time Machine- this was reset to external HD and still get msg?

How to install Snow Leopard on Macbook Pro? keep getting msg- cannot install Internal HD is used for Time Machine- this was reset to external HD and still get msg?

At some point, your internal HD was selected for use as Time Machine backups, and a Backups.backupdb folder was created at the top level. So OSX thinks you're trying to install it on the same drive as your backups.
Open your internal HD with the Finder (you won't find it via a Spotlight or Finder search) and delete that folder.

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

USB Print and Storage Center running 100% of cpu

Macbook Pro 15 in. mid '09, 10.7.4, 8GB DRAM, 500HD.
Occassionally, I get a very hot computer. Running Activity Monitor indicates that the USB Print and Storage Center is running the CPU at 100% or in the high 90s. Since I'm not printing or even using USB printing, I haven't figured out what is causing this issue. Any suggestions?

Do you have a Belkin router? i have the same problem..
Found sort of a solution here:
http://hintsforums.macworld.com/showthread.php?t=140847

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

HP4620 will not print black BUT i can scan a copy to the printer and then print out black

AS soon as i changed the black print cartridge it stopped printing black copies but i can scan a document to the pc and then print it and it prints out perfect .... this is the third HP printer that i have (different models) where the SAME thing happens... i just sent 105.00 for cartridges that the printer still does not print. I'm not understanding why i can print out a scanned document but cannot print anything else PLEASE help me because ive already wasted 105.00 .... i've done everything ... cleaned the printheads 20 times and also reset printer to factory defaultsNOTHING WORKS .......

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why can I only getFacebook in miniscule print and not in full size any more?

One day I went to use Facebook and found it was in minuscule unreadable print - and I can find no way of enlarging it.
ALSO my Hotmail address and password were the entry to Facebook, but I no longer have this address as I deleted it because it started to bring in porn.
All my photos are lodged on Facebook. Is there any way I can get into my page again AND have it in normal size? Thank you. PJR

Have you tried the 'NoSquint' extension? It will allow you to resize just the text, or resize everything.
Also, check your 'DPI' setting in 'about:config'
(search for the value:''' layout.css.dpi''' ).
Note, if you can't find the value, that means it is using the 'default' value (I don't know what that is!). I find it best to set it, since it doesn't seem to reliably use the OS's value.
Check your windows setting (what version of windws are you using, or are you using windows?) This is usually more of a problem on higher resolution screens, but the default of '96DPI', really only works well on screens that are really '96DPI'.
If you don't know your monitor's "DPI", find it's 'resolution' on the Display Properties page (control panel -> Display).
On Win7, it should be right there.
On WinXP, it's under 'Settings -> Advanced'.
To figure out what your monitor's DPI (Dots Per Inch):
1) look at your monitors resolution on the 'Display' page from the control panel. You should see a value like:
1024 x 768
1600 x 1200
1920 x 1080
1920 x 1200
2560 x 1600
... etc.
(those are just a few examples of values. Yours may be different).
The first number is your horizontal & 2nd = vertical.
2) Get a tape measure or ruler and measure the width of your screen's *display* area (not the outside edge, but from the displayed image's edges).
You can also measure the height if that is easier.
Now take the corresponding number you found in #1.
Example, say your screen is 1600x1200.
If you measured the width use the 1st number (1600) and if you measured the height, use the 2nd number (1200).
Now divide the corresponding number from #1 (lets say you measured the width), so '1600' and divide it by the actual width that you measured.
So if you measured 16 inches across, you'd get:
1600/16 -> 100 dots/inch, or if you measured 16 and ~2/3 inches, you'd get:
1600/16.7 -> (approx) 96 DPI.
Once you know that you can set the value in windows (if it isn't already set right), but most importantly -- set the value in Firefox on the about:config page in the value:
(you may need to create it).
layout.css.dpi
If you need to create the value (if it isn't already there),
right click in the area where all the values are -- and select 'New', then select 'Integer'.
For the name, type in:
layout.css.dpi
& hit enter.
For the value, enter the DPI you want.
NOTE: if you have the DPI set correctly and everything still seems too small, you can 'lie' to this setting and it will magnify everything.
If you set it to a *higher* value than what you really have, it will magnify things.
So let's say your real value is 100 DPI.
If you set the layout.css.dpi value to 125, you will make all the text 25% bigger.
If your real value is 96DPI, then a value of 120 will make things 25% bigger (120/96 = 1.25).
Hope this helps...

Can't run host function in procedure and reports

Hello
i'm unable to use the host function in reports and procedure.
host('ar60runb userid=apps/apps report=/vision/d01/oracle/visappl/fnd/11.5.0/reports/US/UBLPS1.rdf batch=yes mode=bitmap destype=file desname=/vision/d01/oracle/visappl/fnd/11.5.0/reports/US/UBLPS1.pdf desformat=pdf paraform=yes P_EMP_NO='||i.EMPLOYEE_NUMBER||' PAYDT='||i.PAY_RUN_DATE);
Kindly help ASAP!!!!
Regards
Fahad

"I noticed that when I publish apk from Flash I don't have option to select path to android SDK below 2 checkboxes ( install app on device and run app on device after publishing)"
Are you saying the 2 checkbox's are missing? If so ,(or even if not), perhaps you don't have the latest extension installed in flash?
http://labs.adobe.com/technologies/flashpro_extensionforair/
I had an issue like you describe before. Everything was updated with my machine and phone, usb debugging , allow installation of non market apps... but i was not able to manually install my own apk's on my device.
If i were to put the .apk on my server or just drag it to the phone via USB i could not install it. it was "untitled" or "unknown" i forget.
The only way it would work was on export "install application on the connected android device".
However If i took anyone else's .apk made from flash, i could install it from my server or via usb drag/drop.
Even at one point someone on the forum posted an apk and the source .fla
Installed that apk? = YES
Export the same .fla myself with no changes = FAIL to install (unless launching directly from flash).
I was using windows xp, I happen to be upgrading my cpu last month so i installed windows 7 and re-installed flash, and now it works fine. I never figured it out. I was somehow producing non-viable .apks . However it works now and I have done nothing different (besides going from xp to win7 and reinstalling flash).
"other air apps (from other ppl) work both on phone and device."
I'm guessing you only installed other air4android apps from the market?
If you haven't tried yet, i could email you a .fla and .apk, see if you can install that from your ftp. Then re-export if yourself and see if it fails again?
edit:spelling

Can I back up an external drive and an airbook with a third drive

I would like to back up an external drive and an airbook with a third drive. This was the setup I used with my Imac. The third drive was linked to the external drive which was linked to the imac. I used time machine. Both the third drive and the external drive were visible on the desktop of the imac. Now I want to use this system to back up the airbook and the external drive, but the third drive doesn't appear on the airbook's desk top, in fact it is invisible and doesn't seem to be recognized in finder or anywhere else from the airbook. Is there some distinction that prevents the airbook from allowing this back up configuration, but that allowed the imac to work in this configuration.
Thanks,
Daviiiiiiid

Of course, always that the external drive is formatted in “Mac OS Extended (Journaled)”. Apart from that, you shouldn't have any issue,
Then, open System Preferences > Time Machine > Options, and remove the external drive from excluded items. The next backup will include your external drive.
Note that you may not be able to back up the external drive if it's connected to your Time Capsule. If it doesn't work, connect the external drive to your computer

HT1515 can i hook up a ethernet printer and a usb printer to the same airport express

I want to hook up an ethernet printer and a usb printer to an airport express? Is this possible and how should I set up the airport express?

I have an Airport Extreme, 5th generation, that is hooked to the internet and is the source of my home network. I am replacing an old AXs 801.11g with an 801.11n unit. The need to run a printer on the USB port is because it is an old HP 7400 all in one with a wireless g card. I want to set the network up for all wireless N and 5 Ghz for hopefully faster network speed. It is my understanding that if the network is set that way, the wireless g printer will not be recognized on the network. Since I currently am running a ethernet only Xerox Laser on the ethernet port, I would need to hook the HP using USB inorder to keep it on the network for scanning and such. Thanks to you and your information, I think I have the bases covered. If there is a best way to set up the AXs, or if I am missing something more, I thank you in advance and look forward to your assistance.
Thanks

External HD and storage ?n

Hi all.
i have a question about storing some of my projects and sample librarys on DVD.
the situation is that iv been on the road for the last 6 months and will continue to be so for probably the next 4 months. i tried to bring as little as i possibly could.... which is still a lot. anyway, i have 2 500gig external HD's with my projects, instrument libraries and my own sample library collection. Both HD's are the same; 1 being an exact copy of the other.
Now, i have on each HD about 15 gig of projects that i am not working on anymore and dont intend to work on until im back home so i want to free up my external HD and store them on DVD's
so thats my question....what is it like storing important to me items on DVD's. how long are they good for on the DVD ( lifespan ).
also, should i be partitioning my external HD's???
any help much appreciated

thank you Sampleconstuct for your answer on the DVD's
Im sorry, but im not quite sure what you mean in the second paragraph about the partitions. im only new to the whole concept as iv only ever ran a laptop but as im about to invest in a desktop system iv started research the partition idea.
is it not better to partition the drive so as to have project files on 1 partition, sound libraries ( e.g Kontakt, omnishpere etc) on another and other stuff on a 3rd partition???
im sorry, im just not clear
thanks for your help!!

Due to a divorce all my music is on my iTunes and iPod. I had to buy a new computer and want to transfer my Library to the new computer. How can I do this without using an external drive and use new computer just like I do the old one? Thanks.

Due to divorce, all my music is on my iTunes and iPod. I have had to buy a new laptop and want to transfer the library to the new computer before deauthorizing the old one. I dont want to have to use an external drive every time I want to listen to my music. How can I do this and have the same basic iTunes setup as before? HELP!

You might consider itunes match for moving CDs you've copied into your itunes library if you dont have a way to use home sharing.
iTunes match is an optional service offered by apple that costs about $25 a year. It scans your music library and if it finds music that is already in apple's itunes catalog it'll automatically "unlock"/"store" these in the cloud for you. Items that it does not find in the catalog it'll upload and store these in the cloud for you and you can download them on your devices. See http://www.apple.com/itunes/itunes-match/

After a sucessfull install, why am I receiving the "This document could not be printed", and "There are no pages selected to print" errors after a restart?

I have ran into this issue a few times and I don't think the reinstall is the problem. I have some End Users who are telling me they can't print from the IE. Our environment uses IE8 to print forms. I will install the application ( Adobe Reader XI ) and it will work fine for that day. Once they restart, the errors appear and they can no longer print. Has anyone had any experience with this?

Two things to try: open Adobe Reader | Edit | Preferences
Documents: change 'View documents in PDF/A mode' to Never
Security (Enhanced): uncheck 'Enable Protected Mode at Startup'

How can I record voice from external microphone and music on ipad

I am a hypnotherapist and I want to record my sessions. I would like my clients to wear headphones and hear both my background music (playing on my ipad) and my voice THROUGH the headphones as I speak into an external microphone. I thought that I could play the music and plug in a snowball mic and have both music and voice record, as well as have my voice come through the headphones (so that the client is hearing voice and music directly into their ears). I am using the ap Voice Recorder.
Here are the two problems: Using the external mic, I can record my voice, but the music does not record. Also, when I speak into the microphone, it Voice Record records my voice but you can't hear it through the headphones (although you can hear the music). Please help!!!

Thanks. I'll take a look. Maybe I can use a powered USB hub. Someone else mentioned this on another forum so that she could record karaoke and hear her voice and the music at the same time. I think if I plugged the both a usb microphone and a headset into the hub, maybe...just maybe? I can hear the music through regular earbuds. I dunno. Worth a try, though. What do you think?

Can this device host an external printer and storage device simultaenously???

Similar Messages

Maybe you are looking for