Can this inspection lot type 06 be changed

Hi! all
could you please suggest me on this
this is related to QM
When using the standard SAP customer returns process an inspection lot is automatically created. Can this inspection lot type 06 be changed to allow stock to transferred to u201CUnrestrictedu201D or u201CBlockedu201D stock in a similar way as inspection lot type 01.
regards
Vikas

Hi,
Go to MM02, QM view, here deactivate inspection Type "06" and activate Inspection Type "05" i.e. Inspection for other goods receipt
And then go to Schedule line category of Return sales (For e.g. DN ) in VOV6 and assign the movement type as 655 instead of 653 and then run the complete new cycle and check.

Similar Messages

When I burned an album that had pictures from 3 cameras that I rearranged the cd came out in camera order not my rearranged order. Can this be fixed without manually changing the cd?

When I burned an album that had pictures from 3 cameras that I rearranged the cd came out in camera order not my rearranged order. Can this be fixed without manually changing the cd?

No.
How did you arrange the shots in iPhoto? In an album, manually?
Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.
Regards
TD

Recurring inspection lot status "created" changed automatically to "Release" without change history

Dear Experts,
I observed that for few materials recurring inspection lot (inspection lot origin 09) status from "CRTD CHCR SPRQ" to "REL CALC SPRQ PRSI" changed automatically without manual interruption.
I have thoroughly checked the change documents in status management, but the there is change history found.
can anyone help me understand the root cause of the issue?
Regards,
A.Suresh

Hi
Pls check this link
QM - Recurring Inspection (type 09)
Inspection type 09 process
Note : System status CRTD because there is no Insp.plan master data for particular material
Check & create Inspection plan for material & also check the Material master QM view Insp.set up tab.
Suppose if already created Insp.plan for material,then you need to assign Insp.plan manually in QA32 select the insp.lot line & click change Insp.lot icon in Header ,click spec.& save
Then system status change from CRTD to REL.
Thanks in advance

Inspection lot sample Qty change manual

Dear Friends ,
Is there any T Code or procedure to change inspeciton lot sample size in inspection lot
like how we change the Inspection lot Qty
Thanks & Regards
Raj

Hi
You can only reset the sample Quantity using qa02>enter inspection lot>click on sample ->save>This will reset the sample(remove task list)
Now you can change the task list an attach modified sample
Or
Assign manual sapme calculation in Inspection type (without inspection task list)
This will allow you to maintain/enter the manual sample size during lot creation.
try this

Update inspection lot when MIC changes

Hello Gurus,
Is there a way to update existing inspection lot when master characterstic changes?
Any help would be really appreciated!
Regards,
Owais

Hi
You can change the Existing Inspection plans by doing setting at Cleint level as Replace MIC
When you cahnge MIC it will give popup of where used.You can change the task lists.
But this changes will not automatically reflect in an inspection lot.
for this you have to
Go to Qa02
Enter Inspection lot
Click on reset
save
check status of lot CRTD in QA32
now go to QA02
enter
click on Inspection Specification
selct sample
save
check status in QA32 as REL
Regards
Sujit

Manul Creation of Inspection lot type 01

Hi All,
While we create manual inspection lot with std inspection type '01', is it possible to allow to enter PO number also ?
Regds
Jomy

Dear Jomy
It is not possible in standard to put the PO number. You can make use of the short text. please look into the below link for the same subject
Link: [Re: Manual Inspection]
Regards
Gajesh

Inspection Lot Type 03 Confirmation Pop-Up

Gurus,
Can anyone tell me why I am getting a Pop-Up that has the fields for 'Yield', 'Scrap' and 'Rework Qty' and Radio buttons for Partial Confirmation, Final Confirmation and No Confirmation on an 03 Lot when I complete all results and hit save in transaction QE51n?
I have my Master Inspection Characteristics on a Recipe and the lot generates just fine upon Process Order Release. I am just confused on why I am getting a confirmation and Qty pop-up on a Results Recording Save.
Please Help.
Thanks a ton.
Bruce

As Craig said, it's based on your settings of inspection point completion and the control key settings for an operation in the recipe/routing. Check the operation in the recipe where the insp.char are maintained. Go to your recipe, double cliclk the operation and check the QM settings. There are 4 variants for inspe.point completion - I think you have the first variant selcted - quantity, valuation and production - due to this setting you are getting the pop up for quantity confirmation. If you do not want quantity confirmation, change it to valuation or automatic valuation.
This is not a SAP standard setting- simple Master data setting.
Hope it helps.
Thanks,
Ram

Admin can't apply any type of changes because a single weblogic server

When I try to modify/create "anything" in the admin console of weblogic and I try to apply the changes I am getting this error:
"*An error occurred during activation of changes, please see the log for details.*
*Message icon - Error [Management:141191]The prepare phase of the configuration update failed with an exception:*
*Message icon - Error Provider org.apache.xerces.jaxp.DocumentBuilderFactoryImpl not found*"
I found a workaround, but not the solution yet.
It seems the problem is caused by a single weblogic server from the domain, if its clustered then from both weblogic servers, or as many as there are.
The workaround is to search in all the weblogic server in its logs to see which one is reporting this same error when I try to apply the changes. You shut down those servers and suddenly the admin server can apply the changes no problem, then you can re-start the offending weblogic server/s.
My questions are:
* Anyone knows how can I know what is deployed or not in a single weblogic server can affect the admin to apply any changes, including anything not related to the weblogic server that is causing the problem?
* How come is this affecting the admin to apply any changes not related at all with what's in this weblogic server?
* Why if I shutdown the weblogic servers I can apply the changes and then the offending weblogic servers will start again correctly?
Is there an effective solution? Since in production environment I can't just go shutting down servers when I need to apply changes through the admin server.
Scenario:
WebLogic Server Version: 10.3.5.0 generic install
jrockit-jdk1.6.0_29-R28.2.0-4.1.0
Linux x64
Any help/tips will be apreciated.
Edited by: ezra-s on 02-oct-2012 11:17

I found the answer:
".apache.xerces.jaxp.DocumentBuilderFactoryImp" is a document builder factory that is specific for JDK 1.4 and will not work on JDK 1.6, which causes the issue".
It seems the offending webserver as this object in one of their applications which is causing this issue.

Using 05 inspection type, all the materials moves to inspection lot

Dear SAP Gurus,
Using the 05-inspection type in material master for by product material, all the material goes to inspection lot.
how to control the inpection lot movement, i have set a plan that the inspection will be carried through a workcenter,but it moves all the materials to inspection lot.
Since all the materials are moving to inspection lot, i have changed my inpsection type to 02 (goods issue), but the problem is, i couldn't able to record the results for the created inspection lot.
Kindly guide me and correct my process flow,
Thanks in advance
Thanks and Regards,
R.Diwakar

Dear Guru,
Thanks for your response
Sorry for not so clear ....
My scenario is that, the user requires to have a inspection lot for their By-Product. during the production order, after manufacturing say 30000 material, for them the 30000 material should directly posted to the unrestricted usage and a sample maerial should go to inspection lot, where same will be inspected and transfered to unrestricted usage, through QA32.
Based on their requirement, i have set the inspection type -05 in material master and a workcenter specifically created for the quality testing, so that a sample quantity can be produced and flows to the inpection lot,
but it doesnt works,the produced materials are all going to inspection lot.
Kindly guide me on this,
Thanks in advance
R.Diwakar

Just only create 04 type inspection lot only, no more automatically create another

hi, Excperts
     Now I face one business scenarios, for a long term production order as 3 years, only begin to receipt production after the right inspection report.
      In ordre to get manage those information in sap，I purpose to create an 04 type inspection lot according the p.o. manually, inspection repotr information can be recorded in this inspection lot. However, when I do migo goods recipt in sap, another inspection lot was also created automatically, which I never needed.
     Any suggestion ablout just one manually inspection lot, no more automatically inspection created?

Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh

Inspection Lot quantity change (lot origin 03) when Prod. ord. qty changes?

Hi,
it seems that for an inspection lot, with lot origin 03:Production, its Inpsection Lot qty doesnt change when the Production order Total Quantity field changes. Only the Actual Inspection Lot changes.
How can the Inspection lot quantity field of the Inspection Lot be changed accordingly?
Should the enhancement PPCO0007 be used?and then LOSMENGE (table QALS) =GAMNG (table AFKO)
Can it be done?
Thanks in advance

Hi,
In that case, you can do it by :
- Reread the master data of production order(From Menu Bar).
- The status of production order will be converted from "Released" to "Created".
- Release the production order again.
Thanks
SUMIT

Quality inspection lot

Hello all,
Please tell me the step byb step process of QA02 transaction how to release the inspection lot .
Suggest,

QA01 - Create, QA02 - Change , QA03 - Display are used to create inspection lots manually.
Pre requesites
1) Activate inspection type in material master.
2) Activate inspection with task list, specification etc. as per requirement.
3) Create inspection plan for that material with usage as per inspection type.
Go to QA01 enter material plant and inspection type F8
You can create inspection lots manually for all inspection lot origins except the following:
10 (Delivery to customer with sales order)
11 (Delivery to customer without sales order)
12 (General delivery)
13 (Repetitive manufacturing)
14 (Plant maintenance)
Enter quantity and vendor, assign inspection plan and calculate sample size. Save. Inspection lot will be created.If inspection plan is assigned to insp. lot then it will be automatically REL.
If insp. plan is not assigned or sample size is not calculated inspection lot will be in CRTD status.
Go to qa02 inspection specification CLICK on task list assignment system will show u list of inspection plan available for this material or give msg that no inspection plan is present. go to qp01 create inspection plan. and then assign save
inspection lot will be in rel status now.

Quality inspection lot creation at GIR

Dear MM/QM guru's........
Can you explain me in bref wat are the customizing setting in Quality managemnt and MM for creation of inspection lot the moment you go GIR and how to release the inspection lot..
Reagrds
SARFRAZ

hi sarfrazny,
first you have to activate the QM view in material and activate the inspection type in the material master .
inspection plan to be prepared
as soon as you process the the GIR a inpection lot will be created for which you have to record the result .
kindly look into this
<b>Inspection for a Goods Issue</b>
Purpose
The system can automatically create an inspection lot when a goods issue is posted in the system. A goods issue can be posted internally (for example, a material withdrawal from the warehouse) or to an external destination (for example, a goods issue to a customer). In a goods issue, the materials are usually withdrawn from unrestricted-use stock and posted to a cost center, project, customer, or other account assignment object. When the system creates an inspection lot for a goods issue, the inspection lot is not stock relevant.
Prerequisites
The system creates an inspection lot automatically for a goods issue if the following conditions have been met:
In Customizing for Inspection Lot Creation (Inspection for a Goods Movement) QM is active for the movement type.
QM is active for the material. This means that in the inspection settings of the material master:
In Customizing for Inspection Lot Creation (Inspection for a Goods Movement) QM is active for the movement type.
An inspection type is active for inspection lot origin 02 (goods issue)
The other indicators for the inspection type are set appropriately to meet your requirements for inspection processing (for more information, see Processing Inspection Settings)
Process Flow
The system creates an inspection lot automatically when the goods issue is posted in Materials Management (MM).
If the inspector will record results for inspection characteristics (controlled by the inspection settings in the material master), the system assigns an inspection specification (for example, a task list or material specification) to the inspection lot. If the system cannot find a specification or if more than one inspection specification is assigned to the material, you must assign a specification to the inspection lot manually.
If dynamic modification criteria are defined for the inspection lot origin or task list usage, the system checks the existing quality level for the material (and the other criteria, if applicable):
If a quality level is not available, the system creates one.
If the dynamic modification rule specifies that the quality level must be updated when the usage decision is made, the system does not update the quality level now.
If the dynamic modification rule specifies that the quality level must be updated when an inspection lot is created, the system updates the quality level now.
The system calculates the sample size.
If the sample calculation must be triggered manually (controlled by the inspection settings in the material master), you must call up the inspection lot in the change mode and choose the function to trigger the sample calculation manually.
If you are going to inspect the goods in the inspection lot using an inspection specification:
The system can print out the inspection instruction and/or sample-drawing instruction automatically when the inspection lot is created
You can print out the inspection instruction and/or sample-drawing instruction manually when you call up the inspection lot in the change mode
Result
You can use the information in the sample-drawing instruction and inspection instruction as a guide to:
Draw and prepare the samples at the work centers specified for each operation
Inspect the goods in the inspection lot
Record characteristic results and/or defects
When you have finished recording inspection results and/or defects, you can complete the inspection.
Result
When you have finished recording inspection results and/or defects, you can complete the inspection.
regards
thyagarajan

Scenarios for "manual creation of inspection lot"

Hi QM gurus!!
I would just like to ask the main function of QA01 or "<b>Manual creation of inspection lot</b>"
What are the cases/scenarios where this tcode is used? I would really appreciate if you could help me.. Thank you.
Regards,
Heinrick Palad

HI,
The table below provides a brief overview of the functions you can use to process inspection lots. Appropriate cross references are included for the more extensive tasks or for those for which additional information is available.
Prerequisites
The inspection lot processing functions can be linked to various authorizations that are checked by the system whenever you try to process an inspection lot. The following types authorizations are relevant to inspection lot processing:
Material authorizations
The material authorization for QM is stored in the material master. For more information, see Creating and Changing QM-Specific Data for a Material.
Inspection type authorizations
This authorization controls which inspection type the user can access in order to create an inspection lot. The inspection type authorization is plant-specific.
No authorization checks are executed in QM when an inspection lot is created automatically.
Features
Function
Pushbutton / Menu path
What you should know
Accessing the initial screen for the inspection lot processing functions
Logistics ® Quality management ® Quality inspection ® Inspection lot processing ® Inspection lot
Creating an inspection lot manually
See Creating an Inspection Lot Manually
Changing an inspection lot
Choose Change
Enter the number of the inspection lot you want to change and then choose Enter.
Displaying an inspection lot
Choose Display
Enter the number of the inspection lot you want to display and then choose Enter.
Creating a new batch in an inspection lot
See Batch Creation in Inspection Lots
Cancelling an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Cancel lot.
See Cancellation of an Inspection Lot
Blocking/unblocking an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Block lot.
To unblock an inspection lot, choose Inspection lot ® Functions ® Unblock lot.
When you block an inspection lot, you cannot process the lot further. You must unblock the lot if you want to perform any additional operations.
Transferring stock in an inspection lot
See Stock Transfers
Making corrections to inspection lot quantities
See Corrections to Inspection Lot Quantities
Creating a QM order
Call up an inspection lot in the create or change mode and choose Goto ® Insp. lot acc. assgnmt.
See QM Order Creation
Resetting the sample calculation
See Resetting the Sample Calculation
Printing inspection instruction/sample-drawing instruction
See Printout of Instructions
Approving a task list
Call up an inspection lot in the create or change mode and choose Inspection lot ® Functions ® Give approval
If the task lists in your company must be approved before they can be used, you should make sure that only approved task lists are assigned to an inspection lot. If the system selects a task list that has not yet been approved, you can use this function to approve the task list (provided you have the necessary material authorization).
this link help u.
http://help.sap.com/saphelp_erp2004/helpdata/EN/be/00bbe7ca5311d2961800a0c930e04c/frameset.htm
reward is usefull.
tahnks.

Rescheduling of QM Inspection Lot

Dear SAP Guro,
We are dealing a scenario now, wherein for some point in time the QM inspection lot is rescheduled automatically. We noticed this when the production order was rescheduled during the weekend. Example: PO#12345 is rescheduled on a weekend, while the inspection lot for the needed material or component has a schedule falling on weekdays, this QM ILot is supposed to be rescheduled on a weekend also so that the production will be completed but this is not happening. The QM ILot is only rescheduled when the production order which will be using the material fall on a weekend. Is this a normal SAP behavior? Or, the factory calendar assigned to the plant and work center has something to do with this? As we have noticed, the plant is using N1 Factory calendar wherein weekends are non-working days, this N1 calendar is also assigned to the QM work center. The other calendar N2, wherein all days of the month are working days, is assigned to the production order work center. we tried to change the Factory calendar of the QM Work Center but still, the inspection lot is not rescheduled on a weekend.
Kindly let us know your thoughts on this. Any suggestions will be greatly apprecaited.
Kind regards,
JMT

Hi Jasmin,
In config for Inspection type 04. Use - Y Early lot creation for order item in Control Inspection lot.
What will happen with this ?
An inspection lot with inspection lot origin 04 is created when a production or process order is released. You can use this inspection lot to inspect goods receipts of the finished quantities and then manage them after goods receipt posting in the inspection lot stock.
Avoid making a usage decision for this type of early inspection lot before any goods receipts have been posted
test in DEV or QAS system, before moving to PRD
Let me know if any help is required in resolving this isssue
Regards
GAS

Can this inspection lot type 06 be changed

Similar Messages

Maybe you are looking for