Can this work? DVX help......

Well I hope I didnt mess up. I shot one full tape 24PN and another in 24PAdvanced on the DVX-100A.
I searched but was unsure for FCP the workflow I need to make them work on the same timeline for DVD output? I need to work on a 29.97 timeline as some other elements may be used from older video sources.
Is 24PA capable to work on a 30fps timeline along with 24p normal clips?
Thank You

Yeah, just capture it all at 29.97 and you'll be good to go... the pulldown pattern will be different, however look much the same, and in any event, all the material was really shot at 29.97 with different pulldown patterns... so they'll both capture fine at 29.97 and be 29.97 albeit with the two pulldown patterns.
Jerry

Similar Messages

  • Find_report_object('rp2rro') how can this work?

    Hi
    I've spent a long time looking thru metalink (now Support) at the various posts and documents on calling reports from forms using the run_report_object that the translator replaces run_product with, and here and I'm frankly still looking for direction .
    This code is in rp2rro.pll and of course dies, as there is no rp2rro report
    rp2rroNodeId                Report_Object     :=find_report_object('rp2rro');
    I have a menu that calls something called execute_report with just a report name (e.g. end_month_report). execute_report is in a user library and contains a call to rp2rrro. It looks like this
    PROCEDURE execute_report(i_report IN VARCHAR2) IS
    -- Code modified by the Forms Migration Assistant
    -- 11-Jan-2011 01:58 PM
    BEGIN
    SET_APPLICATION_PROPERTY(CURSOR_STYLE, 'BUSY');
    RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS, i_report, SYNCHRONOUS, RUNTIME, FILESYSTEM);
    SET_APPLICATION_PROPERTY(CURSOR_STYLE, 'DEFAULT');
    END;
    Can anyone suggest a way to make this work without modifying the forms?
    Looking at Rp2rro, it uses rp2rroNodeId throughout..
    Thanks for any suggestions

    Well almost a year later, the dummy form solution has been working well with 11GR1, but I have some issues understanding how to make the dummy form call reports using parameters passed in the rp2rro call using this approach
    If a form calls the dummy form with a parameter list containing e.g. start_date, end_date etc then the problem is that the dummy form doesn't have those parameters defined because it can be called from many different forms each with its own set of parameters.
    As I read in the 6i doc "+When passing the default parameter list as well as any other parameter list, make sure that every parameter exists with the same name in the called form"+ which doesn't work as the dummy form doesn't have those parameters defined.
    I'm trying to centralize all the rp2rro report invocations so that developers don't have to add the web.show_document and the hidden values and the rest of that logic to bring a PDF form back into the web browser
    I'm trying out a number of things but would be interested if anyone has any comments..

  • Can't work. HELP!

    Final Cut Pro X is stuck at a loading dialog box that says a previous project I was working with before is being loaded into the Timeline. Now, this happens every time I open FCPX, and it doesn't ever stop loading that project, so, naturally, I can't work with FCPX. Anyone know what might be the reason? How can I fix it?

    First off trash the preferences with this free app
    http://www.digitalrebellion.com/prefman/
    If that doesn't work, navigte to your Project and Events folders and create 2 new folders alongside them with the same name plus the word  Archived after each.
    Then drag the contents of your Projects and Events folders into these and try to open FCP X.

  • TV sideways (portrait), iPad portrait, HDMI out - can this work?

    I'm using either VGA adapter or HDMI adapter ... with iPad 3.
    I'd like to get my TV (which I rotate 90 degrees so that it's effectively a 'portrait' display) to display iPad as shown below (iPad held portrait, TV effectively portrait):
    (attached is a photo of a 'mock-up' of what I hope to do)
    Can this be done? 
    I usually get this instead (which I *don't* want):
    I want to get the FIRST image (top of this note), not the 2nd.  I want to maximize the size
    of the iPad display, by rotating my TV to be in the same orientation as my iPad is held (portrait).
    Any help/ideas?
    Thanks!
    Jim

    .:B:. wrote:If you really want to pimp your setup, you share the database (use a separate MySQL database) and optionally fanart and have each client access them over the LAN. It's pretty cool stuff. I have my desktop (HD6950 GPU, so also XvBA) and AD10 set up like that. It's pure luxury (and it will make a lot of people's jaws drop ). I stop a movie or an ep on my TV, i go to my bedroom and pick up where I left on my desktop.
    Yeah, I've read about this . But I'm (actually, will be when I move ) living in a small apartment (30m^2) so it's really not needed - I plan on watching movies on my TV, not the computer that will be a few meters away .
    I do, however, have all my fanart/cover art/etc. saved locally on the disk with the media, makes scraping so much faster and easier

  • Under PHOTOs on my iPat there is an option to send to email. I cannot make this work. Help

    Under PHOTOs on my iPat there is an option to send a picture  to an email address.
    . I cannot make this work. Help

    When viewing an image full screen you can tap on the icon, and then on Mail to send the image over Email.  Note that you must have an email account setup in Settings->Mail, Contacts, Calendars->Accounts
    Alternatively you can tap and hold anywhere on the body of an Email in the Mail App, and then choose the "Insert Photo or video" option to add one to the email. You may need to tap on the arrow on the left of the context menu options to bring the insert option into view.

  • Airport Express, WPS, 802.11n and 7.5.2 firmware - can this work?!

    Can't believe this hasn't happened to anyone else, but I can't find a relevant thread.
    I have a Time Capsule and an Airport Express base station. The Time Capsule was configured as a WDS base station, and the Express as a WDS Relay. The Express is less than a year old, ie 802.11n.
    Everything worked beautifully until firmware upgrade 7.5.2 which self-installed on the Time Capsule just as you would expect - except the relay stopped working.
    I've tried everything I can imagine, but I can't get the two devices to communicate with each other any more (even with the new firmware on the Express). I have read somewhere on the Apple site that WDS "doesn't work" with 802.11n, but this doesn't fully explain how it did work with 802.11n up until the time of the firmware upgrade to put it mildly. And releasing a firmware "upgrade" that stops existing configurations working, without warning, is not really an Apple thing to do.
    One thing I haven't tried is to revert to older firmware; do I really have to do that? Or is there something wrong here please, Apple? Or did I just imagine, for those 9 months, that the relay was working sweetly?!
    Don't know if this is related, but Airport Utility almost consistently fails to see both devices if they are both switched on, but can only see one or the other. Is it possible that the Express has developed a fault?
    Please help; I have an old house and I can't penetrate most of it without my WDS!!

    Might this apply?
    AirPort Firmware Update 7.5.2 does not install on an extended Wi-Fi base station
    http://support.apple.com/kb/TS3433

  • Pricing item 20 based on material of item 10 - can this work?

    I want to determine a price for line item 20 based on the material# of line item 10.
    If item 10 material = 123 and
       item 20 material = abc,
          item 20 price = $100 and because item 10 material = 123, discount = 10%.
    How can I do this?  I'm willing to create a field for the communication structure, but I don't know how it would work.
    Thanks for any help!

    Hi - In order to solve this require 2 steps need to be carried out:
    1 - We need to create  a routine for Alternative Base Value in the pricing procedure assign it to the condition type that you have created.
    2 - You need to also use the higher level item feature in your contract/order to specify which item you will be using as the basis for your discount calculation.
    **Alt Calculation type may not help you. Alt Basetype for Calculation is the key to solving this
    Regards
    Siddharth
    << Moderator message - Point begging removed >>
    Edited by: Rob Burbank on Nov 26, 2010 3:05 PM

  • 2 ipods, 1 library and 2 computers. Can this work?

    ok so i am sure that the answer to this is a no brainer but i dont know it so i need help.
    My sister just bought an ipod nano, which is what I have, and we were wondering if it is possible for her to access the music from my itunes library and download all my music to her ipod. WE think that this will work, but the real question is can we have two ipods sharing one itunes library, and access this one library from two different computers?
    Somebody please help, we are clueless.

    Assuming both computers have Internet access, I would try sharing your iTunes music with the iTunes library on the other person's computer:
    -Go to Edit > Preferences and then click the tab that says Sharing. Check the box that says Share my music.
    - Then, in iTunes on the other computer, go to Edit > Preferences and check Look for shared music within the Sharing tab.

  • Why doesn't this work?help?

    I am writting an application to diaplay the lyrics of a song. I need to use 2 switch sturctures.( one switch print day the other verse of tweleve days of christmas)
    I can not use arrays or myMethod concept.
    This is what I have
    import javax.swing.JOptionPane;
    import javax.swing.JTextArea;
    import javax.swing.JScrollPane;
    public class Exercise526
         public static void main(String args[] )
         JTextArea outputTextArea = new JTextArea( 18,30 );
         JScrollPane scroller = new JScrollPane(outputTextArea);
         String outputDay = "",
         outputVerse = "";
         for (int day=0; day >= 12; day++ )
         switch (day)
    case 1:
    outputDay = ("1st"); break;
    case 2:
    outputDay =("2nd"); break;
    case 3:
    outputDay = ("3rd"); break;
    case 4:
    outputDay = ("4th"); break;
    case 5:
    outputDay = ("5th"); break;
    case 6:
    outputDay = ("6th"); break;
    case 7:
    outputDay = ("7th"); break;
    case 8:
    outputDay = ("8th"); break;
    case 9:
         outputDay = ("9th"); break;
    case 10:
    outputDay = ("10th"); break;
    case 11:
         outputDay = ("11th"); break;
    case 12:
         outputDay = ("12th"); break;
         for ( int words=0; words >= 12; words++ )
         switch (words)
         case 12:
         outputVerse = "Tweleve lords a-leaping\n";
         case 11:
         outputVerse = "Eleven ladies dancing/n";
         case 10:
         outputVerse = "Ten pipers piping\n";
         case 9:
         outputVerse = "Nine drummers drumming\n";
         case 8:
         outputVerse = "Eight maids a-milking\n";
         case 7:
         outputVerse = "Seven swans swimming\n";
         case 6:
         outputVerse = "Six geese a-laying\n";
         case 5:
         outputVerse = "Five golden rings\n";
         case 4:
         outputVerse = "Four colly birds\n";
         case 3:
         outputVerse = "Three french hens\n";
         case 2:
         outputVerse = "Two turtle doves and\n";
         case 1:
         outputVerse = "A partridge in a pear tree\n";
    outputTextArea.setText(outputDay);
    outputTextArea.setText(outputVerse);
    outputTextArea.append("\tThe Tweleve Days of Christmas\n");
    outputTextArea.append("\nOn the"+outputDay+"day of Christmas my true love gave to me"+ outputVerse);
    outputTextArea.append("\n\tProgrammed by: Carly Murphey");
    JOptionPane.showMessageDialog( null, outputTextArea,
         "The Tweleve Days of Christmas",
         JOptionPane.PLAIN_MESSAGE );
         System.exit(0);
    I can not figure out how to diaplay in JTextarea what the switch data is. Please help. This is due real soon.
    Carly

    // Also remember to put "break;" after each case;otherwise they all mush together
    Actually, mushing together is the whole point of the
    exercise here. You want to print "12 lords... 11
    ladies..." and so on. This is the first situation I
    have ever seen where you would actually NOT want the
    breaks in your switch statement!Look at the code again. The "12 lords... 11 ladies" part sets a variable rather than printing. Therefore, you do need the breaks.
    If the assignments were changed to prints, then you could remove the loop and the breaks. However, this program would be much simpler with arrays instead of switch statements. Maybe that's the next exercise...

  • My 7th gen ipod nano wil not show up on my laptop when I plug it in and neither will my brothers new ipad,they don't come up in my computher either and I've installed the new itunes twice but still no change,I really need to get this working,Please help

    I need help

    Thanks for a reply
    The cable that I'm using came with my 5th gen nano. The 6th gen Ipod shows that it's connected but the computer doesn't see it, so I don't think that it's the cable.
    I did try this before when looking at the troubleshooting guide and nothing happens. It just resets and then the Ipod screen tells me that it's connected to the computer. It still is unseen by Itunes and no where to be found in my computer.
    I don't have another computer to plug it into at the moment but I may be able to visit a friend that owns a decent PC in a few days. If that doesn't work out I will be getting a new lap top in a week and I'm hoping that it will work on that, but it won't be a Mac. So, let's say it works when I plug it into one of these computers, should I reset my Ipod from there or is there something else I should do?

  • Two Ipods for one computer:  Can this work?

    Question:
    My wife has an Ipod nano and my daughter wants one for Christmas. If my daughter hooks hers up to the computer, will it automatically load all the songs in my wifes itunes? Can they keep their songs separate from each others Ipods?
    Thanks in advance for any info.

    Apple has a great iPod website that explains all kinds of things about the iPod. Be sure to take a look there.
    But to answer your question, yes, your daughter and wife can certainly use one computer and two iPods. My wife and I did for about a year. The first question is this - do they share any of the same musical tastes?
    If not, then the easiest solution would be to create an account on your computer for your daughter. She can put her music in that account, keep her own iTunes library, and fill her iPod to her own delight.
    If they do share any musical interests then it will be more economical to use just the one account. Your wife and daughter can create their own individual playlists and set their iPod preferences to sync only the playlists they choose.

  • Timestamp query in partitioned table - can this work?

    Hi,
    I have a table RANGE partitioned by a column named: CREATE_DATE (DATE). Its purpose is to manage the daily create/drop partitions of this table, I do not want to include this column in queries. I do not have an index on this column. We chose DATE for this column because we want to maintain a specific number of days in this table. And when we originally tried to use the STOP_TMSTMP column, TIMESTAMP proved to be unusable for RANGE partitioning.
    There are two other Timestamp columns that ARE used for precise transaction time calculation (STOP_TMSTMP - START_TMSTMP), and included within queries.
    I have an index on the STOP/START_TMSTMP but it is not getting used. And a table scan is occurring. So, finally my main question: How can I make the STOP_TIMESTAMP column index be used in queries against this table? And Is the CREATE_DATE required in a query, or can I safely ignore this column?
    Thanks,
    Mike

    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
    PL/SQL Release 10.2.0.3.0 - Production
    "CORE     10.2.0.3.0     Production"
    TNS for Solaris: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Example query:
    select count(*)
    from flow_completion_record
    where stop_timestamp > '03-MAY-10 12.00.01.000000 AM'
    Takes 370 seconds and returns 2.7 million rows.
    Are you smarter than Oracle's optimizer?I will answer this rhetorical question with another question: does anyone really know what the optimizer will do? Or are you just best-guessing?
    Back to the original question: If I use the CREATE_DATE column to RANGE PARTITION this table, can I ignore it for queries in this table when it comes to TIMESTAMP?
    I really want to treat CREATE_DATE like I would an ID primary key column. Its value is set but I do not use it for queries.
    Thanks

  • Exchange and Mail.app 3.1 Can this work?

    I am desperately trying to not have to run a VM Windows machine and am trying to get my email from my exchange server. Is there a tutorial on how to do this somewhere?
    I see the Exchange option when setting up the account but that is where I seem to have problems.
    I get these instruction for Entourage from Intermedia
    When I look at the Mail setup I see OWA settings? What is that? (Outlook Web Access?)
    Message was edited by: thinktwice

    We also use Intermedia.net and I've yet to get mail.app and Exchange to work together. The KB and support offer very little more than what you see posted here already. The "Mail for Mac OSX" are not even close to being accurate for our dedicated hosting plan (we don't have mail.domain.com type names).
    Mail.app doesn't give you much to go on either... I plug in the information and it just never connects or never goes online. If I open up the Activity window I see it try and connect but then just drops the connection. No failed password or other error message.
    Anyone else have any experience with Intermedia or success with Exchange?
    --KD

  • Can this work to backup iPhone...

    I am 3 computers past my last backup in iTunes because my original one kept getting errors. I want to push everything to my computer via my phone. I have all my music saved externally, But I don't want to lose my notes, and preferably data within my apps. I could manually transfer everything, but this could result in a disaster. I was wondering if I backed my entire iPhone to the cloud, could I then pull that to my iTunes account and sync the two devices that way? I really miss having my iPhone synced to my Computer. Btw, it is 32GB iPhone 4, and includes every little bit of that 32GB. So I understand I would have to pay for that data to cloud back up.
    As in, I dont care about my music. I have it all, Its everything else I dont want to lose. Does iCloud do this??
    Thanks!!

    Ahh, I dont use iTunes because it wants to erase my phone's data and sync to my computer. But I dont want to lose the data associated with notes/contacts/apps.
    But your saying that I could use iCloud to back up that data, then use iTunes to wipe my iPhone and by authorizing my computer, it will get all of my app and music purchases back. Then add any CD music from my backups. Then I can use iCloud to reput the notes/contacts/apps data back into my iPhone and this result in the same iPhone but synced to my computer?
    (I have iCloud, but never backed up because I had too much data. But i realized it was mostly pictures. And i can manually back those up, so now I am actually under the 5GB limit I think)

  • Can this work for a chart?

    i want to create a static group
    like
    such that i can see group in report
    1 In Picking
    2 In Packing
    3 In Engraving
    4 In SHipping
    5 etc.
    6
    that group then i can use in chart and create another formula
    to show ship of date

    Hi Paul,
    You can't really create 'static' groups *without evaluating them against a database field value*.
    E.g:
    If {database_field} = <some_value> then 'In Picking'
    else if {database_field} = <some_value> then 'In Packing'
    else 'In Shipping'
    You can then create a group on this formula and even use this in a Chart/Crosstab.
    -Abhilash

Maybe you are looking for