Can this work for a chart?

i want to create a static group
like
such that i can see group in report
1 In Picking
2 In Packing
3 In Engraving
4 In SHipping
5 etc.
6
that group then i can use in chart and create another formula
to show ship of date

Hi Paul,
You can't really create 'static' groups *without evaluating them against a database field value*.
E.g:
If {database_field} = <some_value> then 'In Picking'
else if {database_field} = <some_value> then 'In Packing'
else 'In Shipping'
You can then create a group on this formula and even use this in a Chart/Crosstab.
-Abhilash

Similar Messages

Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

How can I work for Apple to give my Ideas ???

How can I work for Apple to give my Ideas ???

Sr. am From Honduras, am on High School, I am creating a new PC that will be a Tablet but also will display a Image in a bord or any place like a Datashow, I know that i cant send my Idea but I really want to work with them that is my dream, Look this Image:
I have heard about the Campus I will like to go there, and learn more

Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigge

Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.

Working battery needs to be in for the computer to function.

Possible LR CC Instability Fix - This worked for me...

For those who have upgraded to LR CC and are finding the software to be unstable, are getting gray boxes instead of pictures when filtering images or are finding LR CC is slowing down your computer to a crawl this worked for me....
1) Go to Pictures/Lightroom/ (or where you have designated your catalog files are stored)
Rename LR 5 .Irdata file and catalog as .old or any earlier version of LR-if there
Delete any catalogs and temporary files created by LR CC - yes if you have any work in those files it will be lost, this is the unfortunate trade off to have a working copy of LR CC
2) Run LR CC as administrator (I haven't tried running it normally, it may work), when if first starts a dialogue box will pop up stating the default catalog cannot be found and ask if you want to create a new one or try to find an existing one - create a new blank default catalog
That's it. (Of course I found this after spending 90 minutes waiting for chat help and 2 hours with chat, and uninstalling both LR CC and PS CC2014 in hopes of fixing the issues I was having.) I've been able to reprocess the images I was working on when I upgraded and converted the catalog...I don't know if this is an upgrade issue or if I did something wrong in the upgrade, but I had a frustrating 3 days of being unable to process a client's family pics and computer crashes.
Briefly, LR CC would start and open, no hangs or crashes on the splash screen, it would kind of work for a few minutes then the pictures would turn into gray boxes, then the software would just stop working, no error, nothing just unresponsive. My laptop would slow to a crawl and I would be forced to restart and my laptop would have to be hard booted to be shut down. If I left LR CC open and my screensaver would start and my laptop would sleep on "waking up" I would have nothing on the screen - no task bar or desktop icons - just a picture and a mouse that moved but did nothing else.
I hope this helps.
I wish you luck and virtual chocolate,
Nonnie

Thanks for this! I tried doing it a different way and completely ruined my sound all together to the point that there weren't even any audio outputs detected! Fortunately this fix got me back on track and it's working again.

Mic doesn't work after upgrade to iOS 7.0.2 ? go to settings privacy microphones and allow access( green button) to apps This worked for me

Mic doesn't work on iPad 2 after upgrade to ios7.0.2? Go to settings / privacy/ microphones. Then allow access to relevant apps (green button)
This worked for me on skype, vocal live, mic pro apps

Can't believe this worked! I had same issue since upgrade, searched web, found this... Hoover the mic for around 15 seconds... It only flaming well worked!

HT2534 what country does this work for? no such caption as none on the paying option

what country does this work for? no such caption as none on the paying option

As far as I am aware it works for all countries. You are following the instructions on that page exactly e.g. it's a new account that you are trying to create and you are selecting a free app in the store and clicking on 'create Apple id' when 'buying' it ?

Can someone please try this and see if this works for them...

Hi there
I cannot get the following to work but according to the mainstage manual this should work. Could someone please try this and see if this works:
a. Create a new concert based on any template. Delete all patches except one (lets call this remaining patch X).
b. Add a Bass instrument channel strip at the Concert level (by selecting the Concert in the patch list and then hitting the '+' button on the right within the Channel strips and selecting Software Instrument).
c. Set the Concert level Bass instrument channel strip to play only on the first 2 octaves or so, by setting the Key Range parameters appropriately.
d. Click on the remaining patch X. You should see that it automatically has your bass instrument as a split on the left hand octaves on the Mainstage keyboard displayed. So everything good so far.
d. Now save the concert with any name.
e. Close the concert.
f. Re-open the same concert again. Click on the patch X. At this point I would expect the Bass instrument to be showing on the lower octaves. This does not happen for me.
I've spent a couple of days trying to see if I'm doing something wrong, but cannot figure this out. Please please someone let me know the outcome of trying the above. And if I'm doing something wrong to get this to work, kindly let me know.
thanks
Ziggy

Thank you all for your suggestions and taking the time to try this out. I think I've sussed out what the problem is.
If you create them like Thor mentions that always seems to work. Thor, I don't understand what you mean by hitting the "+" in the channel strip area. Doing this creates an additional channel strip and not a new patch.
What I was trying to do before was to include all patches in a set as well. So I have my Concert, then a Set, then patches within my Set. If I added a Bass at the concert level, it looks like this was then propagated to all my patches in my set. But when I closed Mainstage and re-opened, the bass wasn't there at the Set or patch level.
I really think there is a bug with Mainstage, where if you have Sets and patches within sets, any instruments at Concert level do not get inherited by the Set, patches in the set. I've tried this a few times and tried without using Sets. It always seems to work without Sets.
So the lesson is not to use Sets, if you want to share concert level intruments.
Once again, thank you guys for trying this out.
Ziggy

Re: Mifi and Charging - does this work for charging the iPad?

I found the following post on here - but it is too old for me to reply directly to it - however, this was a very good post and it worked for me and I would really like to get in touch with mikebob to see if the same thing would work for charging the iPad - his ideas really work. And does he or anyone know how to charge the iPad from batteries?
thanks a lot
mikebob
Contributor
http://community.vzw.com/t5/user/viewprofilepage/user-id/28840
Posts: 3
Registered: 08-25-2009
Device: mifi 2200
0
Re: MiFi and Charging
Options
10-01-2009 07:38 PM
I finally managed to figure out the proper cabling to get the Verizon Mifi 2200 to charge using a generic USB charger. To recap the problem... The mifi device will only charge when using the supplied micro usb charger, or when connected to a computer USB port using the supplied micro USB cable. When connected to a computer, the device reverts to it's connected data mode, which turns off the wifi ssid broadcast and requires the Verizon access manager application to be launched. Most third party chargers will not work... including most 12V lighter to USB adapters, and most backup battery solutions.
Here is what is going on... Per the USB specification, Pins 1 and 4 are 5V power and ground respectively. Pins 2 and 3 are data+ and data-. In most chargers, pins two and three are tied via a pullup resistor to the 5V line. If you measure the voltage on 2 and 3 you will see around 3V, equivalent to a logic high state. This has something to do with allowing the device being charged to identify whether it should be in a fast or slow charging mode. More importantly, it is what the Apple iPod expects to see . So, anyone wanting to build generic USB chargers will probably implement this way in order to tap into the single largest device market around. Unfortunately, the mifi does not like the logic high on pins 2 and 3. I haven't yet sorted out why, but when it sees logic high on pins two and three, it refuses to go into charging mode.
The solution is to use a cable where pins 1 and 4 (5V and GND) are carried straight through. Pins 2 and 3 need to be disconnected from the charging source and shorted together at the Mifi end. If this was a miniUSB instead of a microUSB, it would be what is called a "charge only" cable. I have not found any vendors yet for a charge only microUSB cable so I went ahead and performed surgery on a standard microUSB cable. I took a standard USB cable, cut it and then connected it to a microUSB connector from an old Motorola bluetooth headset charger. Interestingly, the microUSB connector from the Moto charger already has pins 2 and 3 shorted together internally so all I had to do was connect 5V and ground and heat shrink tube the whole thing. With this cable I can charge the mifi from any generic USB port, including those on 12V lighter adapters, and rechargeable backup batteries. In addition, I can also connect the Mifi to my laptop to charge while continuing to access the Mifi via wifi.
Only word of caution... You really need to connect the Mifi to your computer using the standard data cable on occasion, say once per month. The reason is that it is only in this mode that you will receive notifications of S/W updates and/or the need to update your PRL. (preferred roaming list).

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
Also see the very end of this Linked page...
Apple - iOS 6 Whats New

Ipod not recognised in ITunes. My solution (try this - worked for me!)

Hello. i had IPOD 30GB vid for Xmas and have spent 3 days surfing through info trying to find out why itunes did not recognise it!
I could see it in my computer but not itunes. I tried everything - and I mean EVERYTHING. I reinstalled, rebooted, restored reset etc etc! We had 2 IPODs to install so we knew it couldnt be a total hardware failure as both were doing the same thing.
Sorry if this is too basic for the techie people but I needed these instructions!
My problem was that Ipod was recognised as the C drive. Im not sure why this caused such a huge problem but there was a simple solution.
Following installation of software (inc new version from website) open Itunes. If your IPOD is not showing up in Itunes, (be patient though - it sometimes takes a few minutes) please try this first!
Open MY COMPUTER and wait until IPOD is showing in there (again - it sometimes takes an inexplicable amount of time - but be patient)
Click on START icon,
Right click on MY COMPUTER,
MANAGE,
STORAGE
right click DISK MANAGEMENT
ALL TASKS
CHANGE DRIVE LETTER AND PATHS
Now change the IPOD drive to a letter after L (I used Z for one of the IPOD and X for the other to be on the safe side!) You need to do this for EACH IPOD you want to plug in.
Now close this down - reboot your machine and start again.
Open Itunes and be patient. It sometimes takes the system up to 2 or 3 minutes to recognise the IPOD is connected.
Good Luck!

I was experiencing the same issue and tried the standard install/re-install steps. I also played around a bit with the msconfig soultion but unfortunatley this didn't work for me.
On one of my other machines I just finished configuring a Shuffle for my kids. It required me to install a later IPod updater (iPod Updater 2005-11-17). You can find it at http://www.apple.com/ipod/download/
This seemed to do the trick for me. Goodluck

Why dbms_metadata.get_ddl can not work for db link?

db: 10.2.4
os: RH linux 5
our problem is that we can not get ddl from dbms_metadata.get_ddl for database link, however the db link does exist here as below.
SQL> select * from dba_db_links where owner='XXRPTH';
OWNER DB_LINK USERNAME HOST CREATED
XXR TO_DOPDB.XXR.COM TEST db_opdb 18-FEB-08
XXR XXRPTH_OPDBC.XXR.COM TEST db_opdb 15-JUL-08
XXR XXRPTH_BLIS.XXR.COM BLIS dbls 02-JUN-08
SQL> select dbms_metadata.get_ddl('DB_LINK','XXRPTH_OPDBC.XXR.COM','XXR') from dual;
ERROR:
ORA-31603: object "XXRPTH_OPDBC.XXR.COM" of type DB_LINK not found in schema "XXR"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA", line 2806
ORA-06512: at "SYS.DBMS_METADATA", line 4333
ORA-06512: at line 1
appreciate for any guides
thanks

I ran into this in a slightly different form, I can't remember all the rules and details, but to work around it I had to specify a fake name appendage in the db link creation in order to keep it from automatically appending the global domain.
Something like
create database link abcdef.remotealias connect to ... using 'remotealias'
rather than
create database link abcdef connect to... using 'remotealias'
At least I think it was fake, I was flopping around trying things until I got it to work, and I wound up making it the same as the tnsnames alias. I think I decided I didn't have to, but left it as the lesser of two confusions, and was miffed that the creation scripts I had been using for years suddenly had to be fixed. Yeah, it was my own damned fault, but I still think the way this works is crazy. Now hopefully someone will explain this simply so I look foolish.

Find_report_object('rp2rro') how can this work?

Hi
I've spent a long time looking thru metalink (now Support) at the various posts and documents on calling reports from forms using the run_report_object that the translator replaces run_product with, and here and I'm frankly still looking for direction .
This code is in rp2rro.pll and of course dies, as there is no rp2rro report
rp2rroNodeId Report_Object :=find_report_object('rp2rro');
I have a menu that calls something called execute_report with just a report name (e.g. end_month_report). execute_report is in a user library and contains a call to rp2rrro. It looks like this
PROCEDURE execute_report(i_report IN VARCHAR2) IS
-- Code modified by the Forms Migration Assistant
-- 11-Jan-2011 01:58 PM
BEGIN
SET_APPLICATION_PROPERTY(CURSOR_STYLE, 'BUSY');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS, i_report, SYNCHRONOUS, RUNTIME, FILESYSTEM);
SET_APPLICATION_PROPERTY(CURSOR_STYLE, 'DEFAULT');
END;
Can anyone suggest a way to make this work without modifying the forms?
Looking at Rp2rro, it uses rp2rroNodeId throughout..
Thanks for any suggestions

Well almost a year later, the dummy form solution has been working well with 11GR1, but I have some issues understanding how to make the dummy form call reports using parameters passed in the rp2rro call using this approach
If a form calls the dummy form with a parameter list containing e.g. start_date, end_date etc then the problem is that the dummy form doesn't have those parameters defined because it can be called from many different forms each with its own set of parameters.
As I read in the 6i doc "+When passing the default parameter list as well as any other parameter list, make sure that every parameter exists with the same name in the called form"+ which doesn't work as the dummy form doesn't have those parameters defined.
I'm trying to centralize all the rp2rro report invocations so that developers don't have to add the web.show_document and the hidden values and the rest of that logic to bring a PDF form back into the web browser
I'm trying out a number of things but would be interested if anyone has any comments..

After Lion install, Mac won't sleep (no pulsing sleep light)? This worked for me!

I know there are a plethora of suggestions out there as to how to correct the no sleep light issue since installing Lion. I tried every single one of them-- PRAM and SMC resets, looking for "little snitch" and other apps, and even trashing a preferences folder. None of them worked for me.
This is what did work. APPLE! Listen up!
1. Unplug the magsafe power cord from the computer now or in step 3.
2. Close lid to laptop.
3. Unplug magsafe power cord.
4. Wait a few seconds.
5. Watch as the sleep light begins to pulsate.
6. You can now reattach the magsafe power cord, if you'd like. It doesn't affect sleep mode for me.
After doing this, I open the lid to my MacBook and it's like old times. It takes the display a second or two to come on as it wakes from sleep. It's exactly how it should be.
I hope this helps for most if not all of you, and I hope that Apple quickly determines how to fix this problem with Lion.

Yup, pmset -g assertions will let you know what's preventing your computer from sleeping.
As for AC vs battery, there are 3 profiles for sleep conditions - AC, battery, UPS. Use the "man pmset" command to see more details. Depending on which profile is active, different conditions may or may not prevent system sleep.
I also made a small app to help with diagnosing the problem, if anyone is interested. Source code is provided. If you don't trust it, just use "pmset -g assertions".
Hope Apple fixes it soon.

THIS WORKED FOR ME AFTER WEEKS OF LOOKING...

OK, So here I was with my angry six year old daughter not
able to get on Disney`s Virtual Magic Kingdom because of the last
update I had done to shockwave. It had installed shockwave version
10.1.1.016??? Which totally screwed all three of my home sytstems
up. (2 pcs and 1 laptop) Anyways after reading all and trying
all... which hey the Mozilla Firefox download did work. I finally
got the bright idea of actually following Adobe`s directions and
updated my Internet Explorer on my daughters computer first running
ME. I updated it to Internet explorer 6.0 and re-installed
shockwave just to find out that guess what... they were right it
ran great the first install. I followed up with the other two
computers both running Windows XP Pro but still only installed
IE6.0 and everything is working great. Download IE6.0 right from
www.microsoft.com/ie There is also IE7.0 Beta but I chose to stick
with what worked for me! I hope this message helps some others out
there... if you haven`t tried it you got nothing to lose.
Good Luck All !!!!! E.B.

Unfortunately, this isn't working for me. I sent an e-mail to Apple explaining the problem, basically my download of a music video was almost complete when I got an error and was told to try using the 'check for purchased music' function you used. Previously, this has worked fine, but for some reason the video is flagged as having been downloaded when it has not.
As I said, I sent an e-mail to Apple. I'll let you know if there's a change in the response to the 'check for purchased music' function or what Apple's response to my e-mail is. I'm sure they'll solve the problem for me. It's a minor inconvenience. Besides, this is after all a brand new and clearly already very popular service! I suspect their servers are somewhat overloaded...

This works for certain entries - why?

im trying to find out the largest number/age but it only works for a certain set of data for some reason.
I tested it with ordinary numbers (no objects created) in a seperate program and it works fine but not this one :-/
ConsoleIO.out.println("\n\n\n\n\nPlease enter the employee number you wish to assign a Mentor to: ");
        int pn = ConsoleIO.in.readInt();
        //get this employees prog lang and age
        Iterator iter = theStaff.iterator();
        while(iter.hasNext() == true)
             Programmer programmer = (Programmer)iter.next();
             if(pn == programmer.getPayrollNumber()) //if the pn == payroll number in arraylist
                  ConsoleIO.out.println("They match\n");
                  thisproglang = programmer.getCertainLang(); //get their prog lang
                  thisage = programmer.getAge(); //and age
        //get other employee ages && proglangs
        iter = theStaff.iterator();
        while(iter.hasNext() == true)
             Programmer programmer2 = (Programmer)iter.next();
             getlang = programmer2.getCertainLang(); //get other employees lang
             getage = programmer2.getAge(); //and age
             if(getage > largeage)
                  largeage = getage; //store the largest age in a variable
        if((thisproglang.equals(getlang)) && (largeage == largeage))
                  ConsoleIO.out.println("Eldest Age: " + largeage + "\nLang: " + getlang + "\n\n");
        }if we type in the payrollnumber of an employee who does java - it shows the eldest employee doing that same language - which is great!
but if we do the same thing except for the employee who does VB - nothing shows but there ARE older employees doing the same language (VB) as them
:-/ - whats going on?

what im trying to do is that if the pn is == (equal
to) a pn number in the arrayList then go on further:
get thispn programming language
(programmer.getCertainLang())
and get the age
THEN I want the same thing to happen for all OTHER
objects (or programmers - same thing) and then compare
to see if the object's age is less than the other
objects ageDon't you want to compare the age ONLY IF the programmer is the same language as the first programmer? If you compare the age to all programmers, you will get the oldest programmer, not the oldest programmer of a specific language. Then, if your oldest programmer is not the specified language, nothing will display.
That's why you need to add a check for the same language before you check to see if the programmer is older.
For example, P1 and P2 are Java programmers. P1 has 5 years of experience, P2 has 10 years. P3 and P4 are VB programmers. P3 has 6 years and P4 has 9 years. So running your code with P1's pn will find that P2 is the oldest programmer and since P2 is a Java programmer, your code will show P2. Running with P3's pn will find that P2 is the oldest programmer, but since P3 is VB and P2 is Java, nothing will display.

Can this work for a chart?

Similar Messages

Maybe you are looking for