Can Time Capsule backup an Airport Extreme's attached USB hard drive?

Can Time Capsule backup an Airport Extreme's attached USB hard drive (without currently being attached to a MAC OSX LION system)?

No, sorry.. there is no way for the TC to see the files.. and even if you plug the hard disk into the TC there is no mechanism in the TC to drag the files to itself.. The TC is absolutely a dumb network attached drive.. everything you want to do must be done from a computer.

Similar Messages

  • Can i use time machine with a airport extreme and a external hard drive

    I have connected a hard drive to my airport extreme.
    Now i would like to use time machine to back up my computers, and would like to do this on the hard drive which is connected to my airport extreme.
    Next step is that i would like to be able to approach my external hard drive via the internet.
    Is this possible or not?

    Both are possible. However, Apple does NOT support Time Machine backups to AirPort Disks attached to the 802.11n AirPort Extreme Base Station (AEBSn). Doing so will potentially lead to data corruption and is highly not recommended. Please check out this excellent Pondini article for more details. This article also provides the Apple Support references that states Apple's position. Bottom line? If your backups are critical to you, then you may want to rethink your backup solution.
    As far as accessing the AirPort Disk from the Internet, the following is the basic steps to do so:
    Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Disks, and then, select File Sharing.
    Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
    Verify that Secure Shared Disks = With a disk password. (Recommended)
    Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
    In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
    Click on Update.
    To connect to the shared AirPort Disk from a remote location using a Mac:
    From the Finder > Go > Connect to Server.
    Enter the Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
    Click Connect.
    You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
    Click Connect.

  • AirPort Extreme and shared USB Hard Drive

    I received an AirPort Extreme for Christmas with the intent of using it to share a network Hard Drive and Printer between the multiple machines on our home network. I've finally gotten it set up with Bonjour on the PC's, and the AirPort Utility on all machines. It's connected via ethernet cable to a Dell PC, and wirelessly to an iMac, a Dell Laptop, my iPhone and a PS3. Internet functionality is great for all devices.
    My next step was to connect a Seagate 750GB External USB Hard Drive to the APE. This drive was previously connected to the Dell PC, and was formatted as NTFS. I went through the hassle of converting it to FAT32, I connected it to the router, and both Dell's and the iMac can see the drive. I haven't checked if the PS3 can see it yet, but since I haven't found Bonjour for the PS3, I'm not holding my breath. The iPhone - well, mine isn't jailbroken at the moment.
    A few quick hints I learned from doing a lot of web surfing and trial-and-error. These could save people a LOT of time...
    + Don't format a external drive as either an Apple Drive (HFS+) or as a Windows Drive (NTFS) if you plan on using data off it on both a Mac and a PC. Windows won't read HFS+ without a converter, APE won't accept NTFS. It needs to be FAT32 as this is nearly universal.
    + Windows will only format a maximum of 32GB as FAT32. It's a stupid limit, and you have to jump hoops to get it to do a larger drive size.
    + Use the Disk Utility on the Mac to erase the drive and reformat it as an MS-DOS partition. It will work up to a drive of about 2TB according to what I've read. On the Mac, MS-DOS partition = FAT32, and it formatted my 750GB drive as a single 750GB partition.
    Now, I've begun the task of copying all our media to the drive. Copied a few pictures, no problem. Copied a few MP3's, no problem. Where the problems start is in trying to copy movies to the drive. We have ripped most of our DVD's to DivX / H.264, to keep the kids from destroying the DVD's (trust me, DVD's scratch EASY in the hands of a 5-year old). So I have about 50 movies to transfer, each around 1GB in size.
    Each time I try to transfer a movie to the drive, I get an error "*Error Copying File or Folder*" which displays the message "*Cannot copy BlahBlahBlah: The specified network name is no longer available.*" This also results in the HDD becoming unavailable to the other machines on the network. I've had to un-plug and then re-plug the APE a few times to get the HDD to work again. Sometimes, the copy actually does work, even though I get this message. I know the easy work-around is to connect the HDD directly to the PC with the files on it and transfer them that way, but I shouldn't have to do that - it should just work.
    I'm wondering if anyone else has any kind of a similar experience? It appears that I can stream music and video from the drive easily enough, it's the writing to the drive that seems to be the issue. Thanks in advance...
    Best Regards,
    Jeff

    I would think you would have better luck formatting it as HFS+ (Macintosh Extended File System). You'll still be able to see it from your non-Mac PCs.
    http://discussions.apple.com/message.jspa?messageID=6370006#6370006

  • Why won't my new Airport Extreme recognize my USB Hard drive?  My MacBook recognizes it.  I already have had a great deal of trouble connecting my printer to print wirelessly, but finally resolved that.  Now I want to add the external drive with a USB por

    Why won't my new Airport Extreme recognize my USB external hard drive.  I put a USB port on the base station, and the system recognizes my printer.  When I click on disks - it lists my printer, and when I click on Printers it lists my printer.  What do I need to do to get it to recognize the external drive?  BTW, the MacBook recognizes it, no problem.  I have erased it and reformatted it.  I am running the new Lion OS.  Any help is appreciated.

    Yes, I saw a post on one of these threads about a powered USB hub so I ran over to Office Depot and picked one up.  I was finally able to see the HD in the Airport Utility.  Yay! 

  • Airport Extreme with a USB Hard Drive to a store all iTunes music

    Can you plug in a USB external Hard Drive to a Airport Extreme to store all iTunes music (or other files) and then access this from all wireless devices?

    Yeah the backup is where I'm getting stuck. Seems just keeping the files on my local hard drive is the easiest but that would essentially require a new computer as I'm running a 2008 Macbook Pro and don't want to upgrade it.

  • Airport Extreme and External USB Hard Drive

    I've got an Airport Extreme (not the dual band model) running 7.4.2 and Airport Utility running 5.4.2. Trying to use it with an external hard drive I just bought. Formatted the HD for MAC and have made several backups with the HD connected directly to the Macbook (running 10.6.2). Airport Utility will not recognize the HD under "Disk" tab. Sharing is set on, and when I plug in a regular old flash drive it works perfectly. Just wont pull up the External Hard Drive.

    I've hit almost the same problem. Upgraded the external USB drive to a new 2TB model: it works perfectly with the computer, but the Airport Extreme flashes its orange warning light and reports a 'problem with the external hard drive', recommends attaching it to the computer for repair. Drive checks out fine again when it's connected to the computer. Does the Airport Extreme support 2TB? Would it work if I partitioned the drive?

  • Can I backup to a time capsule via an airport extreme.

    I have a time capsule although it is at the other side of my house and i dont get great signal. I am looking at getting an airport extreme (would an airport expres to extend my signal. Will i be able to backup to my time capsule via my airport extreme.

    If your Time Capsule was purchased in the last few years, chances are you have a simultaneous dual band Time Capsule.
    In order to extend both bands using wireless only, you would need a new AirPort Extreme, since the AirPort Express would only be able to extend one band from the Time Capsule.
    If you only need to have one band extended, then an AirPort Express would likely work for your application.
    Whether you choose the Extreme or Express, keep in mind that the correct location for an extending device is a point that is approximately half the distance from the Time Capsule and the general area that needs more wireless coverage.
    Apple's instructions to configure the "Extend" setup are here. Although an AirPort Extreme is pictured in the example, the instructions for an AirPort Express would be the same.
    http://support.apple.com/kb/HT4259

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • I have a airport time capsule, an older airport extreme, and an airport express.  I want to hard wire my Mac Mini to the network.  What is the best arrangement of the devices?  which ones should be hard wired to optimize extending the network?

    I have a airport time capsule, an older airport extreme, and an older airport express.  I want to hard wire my Mac Mini to the network.  What is the best arrangement of the devices?  which ones should be hard wired to optimize extending the network?

    I am using TM Unifi with an ASUS RT-N18U Wi-Fi router.  I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
    Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
    No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
    Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so

  • Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

    Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
    I would like to strem movies from the hard drive to iphone.
    I have already seen the Goflex Stellite, which works this way.
    Is there any other device that could do this?

    I did a typo. My current computer is a 2010 1/2 iMac.  The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs  would be possiblities.
    Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

  • I recently moved my Aperture Library file to an external hard drive.  Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

    I recently moved my Aperture Library file to an external hard drive.  Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

    One thing to bear in mind, if you are using Time Machine on your Time Capsule and have it set so the TM backup includes your external drive, you will effectively be backing up your Aperture library twice on the same drive, once with Time Machine and once with the vault. This isn't a problem unless you start to run out of space.
    Another thing to note, vaults on network drives used to be flaky (i.e. not really supported) and required workarounds to be able to use them. I'm not sure if this has changed, but I just managed to create a vault on my TC ok.

  • Airport Extreme and connecting a hard drive

    Hello All,
    Thank you ahead of time for your help! I have a couple of questions regarding the set up of my airport extreme and an external hard drive.
    What I want to accomplish is using the airport extreme to ONLY share a hard drive for backup and sharing other files through out the house. My housemates already have the internet going through their router, so there is for the airport extreme. Can a macbook pro (13in intel) receive two wireless signals, one that is the internet and the other from my airport extreme (that shares my hard drive)? If so, how is this done?
    Any assistance would be more that appreciated!!
    Thanks!!

    Hello njoza. Welcome to the Apple Discussions!
    The simplest way to accomplish this would be to connect the 802.11n AirPort Extreme Base Station (AEBSn) to the Internet router by Ethernet; reconfigure the AEBSn as a bridge, and disable its wireless radios.
    In this configuration, you can still share out the hard drive and only need to connect to the Internet router's wireless network for both drive & Internet access.

  • I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

    I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

    Most users should use the Time Capsule for backups. This assumes that "original" copies of your data are on the computer and backups of this data are stored on the Time Capsule.
    If either the Time Capsule or the hard drive on your computer fails, there are at least copies of your important data on the other drive.
    If you are asking if you can place "original" files on the Time Capsule, do you have a plan to backup those files?
    If the Time Capsule drive has a problem....and your only copy of your important data is on the Time Capsule....you will lose everything.
    If you are asking if this is OK, the answer for most folks would be "no".
    Can you clarify if this is what you are asking?

  • I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

    I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
    Write Status is Read/Write
    SMART Status is Not Supported
    Partition Map Scheme is Master Boot Record
    HELP!
    timothy7712

    You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

  • Time Capsule vs. Airport Extreme & external HDD

    Hullo all. For time capsule backups, i am either going to purchase a 1tb time capsule unit or an external usb drive to use with an airport extreme base station's usb port. Wondering if someone more knowledgeable than i knows if either choice offers a transfer speed advantage over the other.
    Also, if i go with the external usb drive option then i'd like to employ a usb hub so that when necessary i can also run my printer off of the same airport's usb port. Would anybody know if this would work okay, without compromising backup speed and quality?
    Thanks!

    artdlr007 wrote:
    Of course - that is the essence of my question: what's faster, time capsule or an AEBS and fast usb external drive. And is the speed difference significant.
    One big problem not being addressed by that choice is that Time Capsule itself is slow. Even if you connect a computer over Gigabit Ethernet directly to a Time Capsule with its internal interface hard drive, you will not get throughput anywhere close to Gigabit Ethernet speeds.
    From the Macworld review of Time Capsule:
    Depending on the size and number of files being backed up, throughput ranged from 45 to 60 Mbps over gigabit Ethernet. This would put an initial 100GB backup at 4 to 6 hours.
    That's right. Real transfer times are lower than 100Mbps Ethernet, on a par with 802.11g wireless, and well below USB 2.0.
    The speeds in the review and in my experience mean that with Time Capsule, neither USB nor the hard drive is the real bottleneck because both have higher throughput than Time Capsule's networking chipset. I don't know if the AEBS would be faster.

Maybe you are looking for

  • Calling reports 6i from Forms 9i

    Hi All, I am updating a menu application that we run from 6i to 9i. The menu app form is a list of reports. The runtime path for each report is returned to menu_link_all.path.th Works great in 6i form and reports however, I can not figure out how to

  • Applying patch on RAC seetup

    Dear all, Tomorrow i need to apply a bug fix patch on my RAC Set up database.For that please tell me the step by step process , how to apply it. it is 2 node RAC. Database version : 10.2.0.4 OS:linux rhel5 i have couple of doubts on it. 1)For patch t

  • Unicode Parameters

    I have a group of reports that query against a non-unicode table (all VARCHAR) In these reports is a multi-value string parameter that is used to filter data in this table. In the dataset, I am using this SQL: Select  Field1 From Data Where Field2 in

  • Dashboard "buttons" are missing...

    http://img413.imageshack.us/my.php?image=dashnn2.jpg "Close" buttons and the arrow buttons on the bottom to navigate through widgets are missing and replaced with white boxes... Everything functions correctly, just isn't visually appealing.. Any idea

  • Keyboard shortcut to apply paragraph tag

    I'm experienced with FrameMaker 8, but just starting to get used to FrameMaker 9. A keyboard shortcut I use constantly in FrameMaker 8 is Ctrl-9, type the first letter of the paragraph tag and hit Enter. If there is more than one tag starting with th