Can Time Machine backup USB Drive connected to Airport Extreme Base Station

I need a new N based wireless router. I would prefer to get just the $179 Base Station and not the $299 Time Capsule. I already have a nice external USB 500GB drive that I would connect to the AEBS. So, once I have this new wireless router/base station installed at home and I have the external USB drive connected to it, can my new Macbook Air with a USB connected 400GB drive be used to backup what is on the Macbook Air and also backup the 500GB USB drive info that is connected to the extreme base station?
Thanks
tj

I found this when searching Apple's web site but it is old, October 2007, and said it could not be done. Has this changed since then?
Here is what I found.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
* Last Modified on: October 26, 2007
* Article: 306833
Time Machine in Mac OS X 10.5 Leopard can be used to back up to many kinds of Mac OS Extended-formatted drives, but it does not support AirPort Extreme's AirPort Disk feature.
Time Machine can back up to another Mac running Leopard with Personal File Sharing, or to a Leopard Server volume, or an Xsan storage device.

Similar Messages

  • Time Machine with 2T drive connected to Airport Extreme base via USB

    I got this to work - Time machine recognizing the drive in its "choose backup disk" menu.
    I used it to store Apple Lossless audio on a big iTunes library, as well as for my Time Machine backups.
    Whole system ran fine for 4 months until last week: while I was using iTunes with that remote library, adding audio to it... "Airport has detected a disk error"... My 2TB of disk turned into a very expensive brick.
    The disk had to be recovered with Disk Warrior, detecting "19,753 directory entries with incorrect text encoding value" as part of a nice one-page-long list of other errors.
    SINCE THEN: no matter what I do, the disk does not show up in Time Machine, even though I can access it via the network exactly as before.
    Any ideas are welcome!

    Apple does not support Time Machine backups to an AirPort disk (a USB drive attached to an AirPort Extreme Base Station (AEBS)). (ref: Mac OS X 10.5: Time Machine doesn't back up to AirPort Extreme AirPort Disks) Although folks, like yourself, have gotten this to work initially, the long-term stability of the TM backups is highly suspect and why Apple doesn't support it. Sorry!

  • Using Spotlight to search USB drive connected to Airport Extreme base stati

    Hi all,
    I successfully connected a USB hard drive to my Airport Extreme base station (the drive has its own power supply; when I tried connecting a USB-powered drive, it wouldn't show up). However, I find that I cannot search the USB hard drive over the Airport network. That is not very convenient, to say the least. Is this possible without paying $500 for Snow Leopard server software or waiting for Lion (with a rumored built-in server function) to arrive?
    Thank you!

    My last response was incorrect. The base station is in the finder window, under "Shared." I click on that and then I see the USB driver. Also, I went to finder prefs and clicked to show servers on the desktop. So now the USB drive connected to the base station shows up on my desktop. But I still can't search it.
    Thanks again.

  • Using time machine backup on disk connected to airport extreme router?

    So I've read a number of articles about using an external hard drive connected to the airport extreme base station as a time machine backup. The thing is that I'm writing this in august 09, most of the articles (which say the feature is officially unsupported) date about a year and a half ago. I'm wondering if there have been any developments since then.

    I also have this problem -- it started about 2 weeks ago (around July 20?), possibly at the time the new Airport Extreme firmware went into effect. I have two separate Mac laptops that each use Time Machine to back up to different disks that are attached to the Airport Extreme (i.e., each laptop has its own backup-destination disk). Both were working flawlessly before (for more than 6 months); now, each one reliably drops the connection to the disk (produces an error message, and thereafter cannot re-connect to the destination disk until I cycle the Airport Extreme with power-off/on). I had hoped that 10.5.8 would help (the release notes talked about improved stability with Airport connections), but not so.

  • How do I find a hard drive connected to Airport Extreme Base Station?

    *Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
    Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
    So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.

    Hello Timothy Uhl. Welcome to the Apple Discussions!
    Try the following to mount the disk...
    o Click on the Desktop to enter Finder
    o Go > Connect to Server...
    o Enter 10.0.1.1 for the server
    o Enter Disk Password
    o Connect
    If this still doesn't solve the problem, let's double-check your disk sharing settings...
    AirPort Extreme Base Station (AEBSn) - File Sharing Setup
    Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
    Disks - File Sharing
    o Secure Shared Disks: <With disk password | With base station password | With accounts >
    (Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
    If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
    o Guest Access: <Not allowed | Read only | Read and write>
    o Share disks over Ethernet WAN port: (unchecked)
    (Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
    o Advertise disks globally using Bonjour: (unchecked)
    o Workgroup: <Windows workgroup name>
    o WINS server: <WINS server IP address>

  • Can't get PC laptop to connect to Airport Extreme base station. Help!

    I've spent a lot of quality time on the phone with support staff at Apple, Earthlink, and Netgear. Now I turn to you fine folks.
    I have an Airport Extreme base station. My G4 is connected to the base station via ethernet, and that works fine. My problem is with the wireless networking with our Dell laptop running Windows XP SP2. Wireless card is a Netgear WG511 with updated firmware. I've configured the network on the PC end using the Netgear Smart Wizard, rather than Windows (I don't know if that makes any difference).
    Smart Wizard says the PC is connected to the network, and says that signal strength is excellent. However, there is no connection. I've tried pinging, but get no reply.
    The status bar in the Smart Wizard window switches every 2 seconds from "Connected" with excellent signal to "Searching" with virtually no signal. The log shows that it's constantly connecting to and disconnecting from the network.
    I've gone over IP and MAC addresses and whatever other settings I could check with all of the respective phone support people. I'm using WPA/WPA2 Personal security, and have double-checked the 13-digit password on both ends. I'm connecting using PPPoE, per Earthlink's settings.
    This is maddening! Any suggestions? I'd really appreciate it.
    G4   Mac OS X (10.4.10)  

    See if iFelix's suggestions work for you.
    http://www.ifelix.co.uk/tech/1000.html
    Remember all the smart wizard stuff is strickley for PC Hadrware and Software and does you no good at all with a Mac.
    Don

  • Time machine can no longer see USB drive connected to airport extreme

    According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
    Does any one have any idea how to make Time Machine work again when connected to my airport extreme?

    bradleydad wrote:
    According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
    Does any one have any idea how to make Time Machine work again when connected to my airport extreme?
    what exactly do you mean when you say that TM doesn't see the drive? do you mean you can not choose it as the destination TM drive in TM system preferences? do you see the airport drive mounted in finder? if yes, connect it directly to your mac and repair the disk (not permissions) with disk utility. then move it back to AEBS. see if that helps. if not try the following terminal command
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    it should not be necessary with drives connected to AEBS but it might work.

  • Time Machine fails with drive connected to Airport Extreme

    First of all, I've had myriad problems with Time Machine, even when it was connected directly to my MBP. But after the recent updates, I installed them and hoped it would work wirelessly. I re-formatted my 120GB OWC drive (my MBP has 30GB available of 120GB). I have already been down the road of making sure I've formatted the drive correctly.
    I excluded my system folder, my entourage identity, downloads, and my Parallels Windows XP file from the backup. I connected the drive to my Airport Extreme (not the gigabit version) and started the backup. Basically, it gets about 5 GB into the backup, moving very slowly, and then fails, saying that it couldn't locate the drive. And that part is true--I can't seem to locate the drive on my network anymore either. And eventually, after another hour or so, my Airport Extreme drops as well, and isn't even available. Even when I unplug the AE, and plug it back in, it still doesn't show up...but after about an hour or so...it pops back up and is available, working fine. My iPhone sees the same problem with AE dropping and then coming back. When the wireless service drops, I can plug an ethernet cable into the AE and I can access the internet fine, so it's not the cable modem (Time Warner).
    Is anyone else seeing this problem? I'm no guru and appreciate that Macs just seem to work correctly. But Time Machine is making me pull my hair out. It's been an unmitigated disaster from start to finish.
    Appreciate any help!

    This is probably the most sensible post I've read on the issue. I've spent the last 2 days trying to get my 500GB LaCie Quadra hard drive to work with my Airport Extreme (the square one, yes .
    I've formatted it correctly with the Disk Utility (multiple times!).
    Airport Utility sees it just fine. I can back up to it when it is connected directly to my MacBook via USB.
    But when the drive is connected via USB to the Airport Extreme, Time Machine doesn't see it -- unless I turn on file sharing with guest access read and write. That seems less-than-secure to me even if my network is protected.
    Without guest access the drive appears in the shared section of the Finder, but I can't connect to it. I've tried all three combinations under "Secure Shared Disks" but none of them work.
    Seems like its just too flaky to use an external disk connected to the Airport Extreme.
    Happy to be pointed in the right direction... are there specific file permissions I should be setting my external drive to?
    Thanks,
    Rich

  • What's the most recent opinion about Time Machine backups to Hard Drives connected to the USB port on the Airport Extreme Base Station (5th generation)?

    I have been searching the Apple communities and Internet for a final answer.  I just bought an Airport Extreme Base Station (5th generation) and LaCie d2 quadra 1TB external drive as a replacement for TWO failed Time Capsules, neither of which Apple would replace due to failed power supplies.  I formatted the 1TB drive using Disk Utility (Mac OS extended (journaled)) from my MacBook Pro, and then plugged into the Airport Extreme Base Station USB port.  The Airport Extreme Base Station see the Hard Drive, and my MacBook Pro sees the Hard Drive in my finder under shared resources.  Time Machine, however, does not see the drive.  Is there a solution for this problem?  If Time Machine will not work, is there another software product out there that will work, like Carbon Copy.  Having to plug the backup drive into the USB port of your laptop every evening kind of defeats the purpose of having a laptop.  Any suggestions would be appreciated.

    Keeping in mind that this is not supported by Apple, I have been successful at doing the following:
    1) Format the entire drive (1 Partition) as Mac Extended (Journaled). You must click in Options and set it as a GUID Partition Table (first option)
    2) Plug drive via USB to AEBS
    3) Using Airport Utility, use Manual Setup, then under Disks, select the new Disk and click File Sharing, then Enable File Sharing and Secured Shared Disks (recommended, of course). Other settings are up to you.
    4) IMPORTANT: you will NOT see this Disk in Time Machine until you open Finder and double-click on it. You will not need to do this again (hopefully).
    5) Now it should appear in Time Machine. Remember to exclude any large files like Virtual Machines, since they will be re-backed-up (is that a word?) every time it changes in any way.
    6) Remember that the first backup (over WiFi) is the longest. Leave the computer alone during this period.
    Good luck, and let us all know how it went for you!

  • My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive.  It says it is a Read Only drive.  When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write".  Any help!

    My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive.  It says it is a Read Only drive.  When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write".  Any help would be appreciated.

    This can be done easily with ethernet.
    Please follow the instructions strictly.
    To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
    Just go to the airport fan in to the top right and turn airport off.
    Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
    Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
    Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
    Ignore all the errors.. they won't stop the backup working.
    Go to the TM and reselect the backup target disk as the TC.
    It should start after 2min and run through to completion.
    That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS.

  • Ghost Drives on my Airport Extreme Base Station.

    I have connected 4 external hard drives to my Airport Extreme Base Station via a powered USB Hub. The drives are recognized under he Airport in my sidebar, and I can double click on them and they mount to my desktop. The problem is that none of my data shows up. They appear to be blank. However, when I disconnect the hub from the airport, and plug it directly into an open USB port on my laptop, all the drives come up and mount automatically, and all data is accounted for. Now I'm not a wirless network guru by any stretch, but I assumed it was sharing preferences. I went through and enabled to share connected drives via accounts and entered all required criteria and updated the settings to my Airport. Still to no avail. Also, just for kicks, I opted to Connect to Server from the Go menu in Finder, and attained the network address by mounting the drives individually and gettting info on them, copying the address and entering them into the Server Address, clicking to add them as favorite Servers. Still same result. They mount as an Airdisk, but no content is shown. I know it's an easy fix, but I just do not know what I'm missing???? Any thoughts would be greatly appreciated.
    P.S.- MAC for President 2012!

    What troubleshooting steps have you already performed?
    For example, If you do not connect the powered USB hub to the AirPort and connect only a single drive to the USB port on the AirPort, what happens?
    If the drive works, then add the powered hub back in to the setup and connect the drive again. What happens?
    If the drive works, add another drive. What happens?
    If the drive does not work when you plug in into the powered hub...but it does work when you plug it in to the USB port on the AirPort directly, then you likely have a bad hub. They do fail. Some cheap USB calbles will work, others won't.
    If you plug the hard drive directly into the USB port on the AirPort and you still cannot "see" the drive, that suggests a problem with the USB port electronics. Have the AirPort checked out at the Apple store or a servicer.

  • Can Time Machine back up a USB Drive connected to Airport Extreme?

    If I connect 2 USB drives to an Airport Extreme via a USB hub, can I use Time Machine to back one up to the other? I've found multiple discussions about how to use an Airport Extreme disk as a Time Machine backup disk, but nothing on this. I want to use one disk as network storage (i.e. use the Airport extreme as a NAS), but I need a backup solution for that disk.

    That's disappointing. I actually have a separate NAS already, configured for RAID1: a ZyXEL NSA220. Worked fine when I only had windows machines, but isn't reliable with my MACs, and doesn't support extended journaled format, so I need a different solution. I was hoping to just use a USB drive attached to my airport extreme to replace it, but I can't do that if I can't back up that USB drive.
    Can anyone recommend a good backup solution? Surely this can't be that uncommon a scenario?

  • Time Machine doesnt see my USB drive, connected to Airport extreme =(

    Hello,
    I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
    I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
    osx 10.5.5 with airport utility 5.3.2
    Thanks in advance!

    Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
    Good luck everyone who struggles with this.
    David

  • Backing Up a USB Drive Connected to Airport Extreme

    I'm considering buying an Airport Extreme Base Station and connecting a hard drive to it to share/store files across the network. I'm thinking of storing mostly video and music files there. I will be using Time Machine with a dedicated HD for each of the individual Mac on the network but TM won't work for the drive connected to the AEBS (as I understand). Any ideas on the best solution to back up network share drive?

    Sorry to hijack the thread, but it looks like Jane has the answers I need.
    I'm looking to get an USB drive to back up three macs, one macbook air on leopard, macbook pro running tiger, and an imac running panther.
    I'd like to plug a portable external hard drive to my AEBSn so that I can work on any computer and back up to the drive and then take the drive and the macbook air with me when I travel so I can work when away, as well as having a printer attached to the AEBSn so I can print wirelessly.
    I've heard that for a drive to be recognised when attached to the AEBSn it will need to have its own power supply and not receive it through the USB connection. Is this true?
    I'm going to need a hub anyway (so I can run the printer) but if I buy a powered hub, will the AEBSn recognise an USB drive that gets it's power from the hub?
    Or will I need to buy a USB drive that has its own power supply regardless of whether the USB hub is powered or not?
    Thanks for any help.

  • Access Control Lists on USB drive connected to AirPort Extreme

    I have a Seagate 320GB drive mounted in a NexStar 2 IDE drive enclosure and connected via USB to my AirPort Extreme Base Station, running version 7.4.1 firmware upgrade.
    Every time I restart the computer or unmount the network drive, an access control list appears to be written to the drive when there should be none, according to Disk Utility. I can tell when there are problems with the drive because the desktop icon turns from bright blue to grey-blue. I have to unmount the drive from the base station and connect it directly to the computer via firewire in order for Disk Utility to examine it. Generally, Disk Utility will report "Incorrect number of Access Control Lists (It should be 0 instead of (whatever number found) )
    Does anyone know why these Access Control Lists are appearing? Is there any easy way to locate them and remove them, other than disconnecting it from the base station and connecting to the computer?
    This problem happens with several different drives, in various NexStar 2 and NexStar 3 enclosures.

    Same problem for me, exept that it happends after copying a file to the drive. It don't happend if I just mount and unmount the disc. The same for all discs I have tryed.
    2009-03-04 12:59:30 +0100: Disk Utility started.
    2009-03-04 12:59:43 +0100: Verifying volume “UltramaxB”
    Starting verification tool: 2009-03-04 12:59:43 +0100
    2009-03-04 12:59:43 +0100: Checking Journaled HFS Plus volume.
    2009-03-04 12:59:43 +0100: Checking Extents Overflow file.
    2009-03-04 12:59:43 +0100: Checking Catalog file.
    2009-03-04 12:59:43 +0100: Checking multi-linked files.
    2009-03-04 12:59:43 +0100: Checking Catalog hierarchy.
    2009-03-04 12:59:43 +0100: Checking Extended Attributes file.
    2009-03-04 12:59:43 +0100: Incorrect number of Access Control Lists
    2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: (It should be 5427 instead of 5430)
    2009-03-04 12:59:43 +0100: Checking volume bitmap.
    2009-03-04 12:59:44 +0100: Checking volume information.
    2009-03-04 12:59:44 +0100: 2009-03-04 12:59:44 +0100: The volume UltramaxB needs to be repaired.
    2009-03-04 12:59:44 +0100: Error: Filesystem verify or repair failed.2009-03-04 12:59:44 +0100:
    2009-03-04 12:59:44 +0100: Disk Utility stopped verifying “UltramaxB” because the following error was encountered:
    Filesystem verify or repair failed.
    2009-03-04 12:59:44 +0100:

Maybe you are looking for