Can TM Backup Files Located on G4 Running OS 10.4.11?

Purchased MyBook and utilized the WD Backup software in order to backup files located on G4 running 10.4.11. Since then, have purchased a G5 iMac running 10.6.5.
Before I reformat the MyBook in order to utilize TM to automatically backup the iMac, I'd like to ensure that I can also backup the G4 files using TM via File Sharing w/ethernet connection between the two computers.
If TM can't do this automatically, I am prepared to copy the files from the G4 "manually" over to the WD MyBook once it is reformated. Since I am using the G5 almost 100% of the time, I am mostly concerned about creating a single backup of the entire G4 (which is already on the WD MyBook but will be lost if I reformat).
What would be the best way to do that (creae a complete backup of the G4) if TM cannot be utilized?
Thanks.

Brae wrote:
Purchased MyBook and utilized the WD Backup software in order to backup files located on G4 running 10.4.11. Since then, have purchased a G5 iMac running 10.6.5.
A G5 iMac can't run OS X 10.6.5. Either it's an Intel iMac or it's running (at most) OS X 10.5.x. From your system details, it seems to be running OS X 10.5.6, in which case your message should have been posted in the Leopard area instead of the Snow Leopard area.
What would be the best way to do that (creae a complete backup of the G4) if TM cannot be utilized?
You could divide that WD disk into two partitions. Use one with Time Machine to back up the iMac. When you want to back up the G4, turn off Time Machine, dismount the WD disk, then use SuperDuper! (http://www.shirt-pocket.com/) or Carbon Copy Cloner (http://www.bombich.com/) to make a "clone" backup of the G4. After the backup is complete, dismount the WD disk, mount it on the G5, then turn Time Machine back on.

Similar Messages

  • HT1766 Can the backup file for a IPAD be stored and accessed on an external drive?

    Can the backup file for a IPAD be stored on an external drive to free up space on a computer?

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
    Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
    http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

  • Backup file location on Window Vista?

    Hi Genius,
    I am looking for backup file location for iPhone 3G on vista. If you can tell me where to look for this on Window Vista.
    Thank You.

    My pleasure. Thanks for the !

  • HT1766 where is the Itunes backup file located in the computer ?

    where is the Itunes backup file located in the computer?

    Read here:
    http://support.apple.com/kb/ht4946

  • Can I transfer files from a Mini running 10.4.11 to a new Mini running Lion? States I need to upgrade Migration Assistant, but I see no viable path I can take. OPtions to get photos over to new Mini?

    Can I transfer files from a Mini running 10.4.11 to a new Mini running Lion? States I need to upgrade Migration Assistant, but I see no viable path I can take. OPtions to get photos over to new Mini?

    Thanks Mende1; I know that PPC apps won't function on Intel machines but I can migrate the Universal apps, right? There is such a large gap between Tiger and Mountain Lion - can I still migrate files directly from one to the other taking the Universal apps as well? Sorry, I'm not very computer savvy!
    Len57

  • In windows 7 where is the iPad backup file located?

    In windows 7 where is the iPad backup file located?

    iTunes places the backup files in the following places:
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • HT4859 i can see backup file from my iphone in icloud,but didn't restore it.

    i can see backup file from my iphone in icloud,but didn't restore it

    Hi donnykhiew!
    It looks like you might be having issues with restoring your iPhone from an iCloud backup. I have an article for you that can help you troubleshoot this issue, and it can be found right here:
    iCloud: Troubleshooting restore issues with iCloud Backup
    http://support.apple.com/kb/TS4036
    Hope that helps. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • ITunes 10.5 iphone backup file location

    Hi,
    Trying to backup my backup file for my iPhone before a total wipe of my phone.
    Does anybody know where the backup file is located on my Macbook? I thought there was a mobilesync folder but i cant seem to find it anymore... Running 10.7.1 on Mac too.
    Thanks

    This is an update to my original post...
    I was able to install iTune 10.5 finally, but Apple Mobile Device Support will still not install (update actually). I restored my PC to an earlier state (before I first tried to install 10.5 the first time) and now my older version will not start since my iTunes library has been upgraded to the 10.5 format. I am really stuck here. I really want to get me music back since I have nearly 30 Gbs of music and movies I have burned from CDs. That does not even include my iTunes online purchases that I can easily revover/re-download.
    - GT

  • How to change file location path at run time in OWB 10g

    Hello all,
    We want to load several files with the same name but from different folders into a single table.
    The information about the paths is stored in an oracle table.
    Is there any best practice to achieve this?
    Our approach is to loop on the number of sources and execute the mapping after changing the location path. We found how to make the loop, and have the apropriate OMB command to update the location path, but we are still looking for a way to call this OMB plus command in a process flow or a mapping. Any idea?
    We also succeeded in loading the file from an unregistered location, which is necessary to be able to update the path, but I'm not sure this is really the best approach. Any advise?
    Thanks in advance for your help!
    best regards
    Cedric.

    Hi,
    I can provide you with an idea on this, dont know if it will work or not.
    Suppose, you need to load 5 files in different folder locations into a single table. Call the mapping 5 times in a process flow. If you log in to the database, and go the table all_directories in your target schema, you will find an entry for the actual path of the file you are trying to laod. I think if this path is updated before each run of the mapping, you can load all files into the target table. Only thing you have to do is call a procedure which will update this record in all_directories table with the different locations each time you want and then plug in this procedure before each call to the mapping in a process flow and see if it works or not?
    Regards
    -AP

  • Using Windows 7...where is the iPhone Backup File Location?

    K...Im trying to burn a CD of the Data have for my iPhone 3GS so next time I restore from a different computer i can always have my files with me...where do i find it?

    Windows 7 is not supported.
    If the iPhone's backup is in the same location as Vista with Windows 7, this link provides where the iPhone backup is located with XP and Vista.
    http://support.apple.com/kb/HT1766

  • Where is backup file located

    error message when syncing to my computer:
    Itunes could not backup the ipod because the backup was corupt or not compatable with the ipod.
    delete the backup file for this ipod, then try again.
    Where is this file?
    This started after updating itunes and to os5.

    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista, Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.
    However, you can also delete it by going to iTunes>Preferences>Devices and delete the backup from there.

  • IPhone automatic backup file location while upgrading to iOS 5

    I need to know where is located the iPhone automatic backup file created by iTunes while upgrading iPhone to iOS 5 via  iTunes 10.5.2.11 / Windows XP.  Itunes creates automatically a backup of iPhone before upgrading and will restore this backup after upgrade is completed.  I need to know where to find this backup file.
    I just upgraded iPhone to iOS 5 via iTunes on Windows XP.  I forgot to make my own iPhone backup before upgrading.  After upgrading and restoring iPhone (the automaitc backup), iTunes started a sync with Outlook even tough I had checked in iTunes "Prevent iPods, iPhones and iPads from syncing automatically".
    I did  not wish iTunes to sync with Outlook, and cancelled the sync.  Now I got a lot of stuff mixed up in my iPhone and I would like to restore my iPhone with the automatic backup created by iTunes before upgrading to iOS 5.  This backup doesn't show in the backups listed in iTunes / device backups.
    Thank you.

    Had same problem, but IOS 5.0.1 can't find automatic backup on my laptop, not sure if it excists?

  • RMAN backup file location

    hi gurus,
    my database backup file are located in one location and rman is looking for backup files in another location.
    backup files are large size so it's long time to move
    how can i tell to rman look for rman in perticular location
    please let me know
    thank you!

    899329 wrote:
    hi gurus,
    my database backup file are located in one location and rman is looking for backup files in another location.
    backup files are large size so it's long time to move
    how can i tell to rman look for rman in perticular location
    please let me know
    thank you!Instead of moving if you want to register those backups with your controlfile. (RMAN repository)
    then
    $rman target /
    RMAN> catalog start with 'location';
    It will search for backup pieces in that location, and it prompts you for confirmation with YES/NO.
    Give yes, so that all the files will be cataloged, Later you can able to view in list backup.
    HTH.

  • Windows 7 ultimate task manager can not open file location

    hi, I just re-installed the Windows 7 Ultimate on my laptop several weeks ago, everything goes well until I find this error. When I open Task Manger and right click one process, then an error occurs when I click "Open File Location". It shows as
    "taskmgr.exe
    This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel."
    There is no any information in the windows event log about this error and I try to search online but without any solution. Could anyone help me figure this out? TIA!

    Hi,
    Since it prompts that it is related with file association, you can try fixing it.
    Fix Default Windows 7 File Extension Types
    http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html
    NOTE This response contains a reference to a third
    party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Andy Altmann
    TechNet Community Support

  • How Can I Backup Files Before Restoring My HD?

    Any suggestions as to how can to backup photos if corrupt OS10.6.1 won't allow burning of DVDs and external HD is corrupt and nonbootable?

    There are several options. Get another external drive and drag and drop. Alternatively, make a bootable clone or disk image of your internal on the new external. Third, use another Mac and [firewire target disk mode|http://support.apple.com/kb/HT1661] to rescue your files. You also could tediously use a flash drive to rescue them--putting them on another computer, even a PC.
    Message was edited by: donv (The Ghost)

Maybe you are looking for

  • Strange problem with Java KeyListener

    Hi everyone, I basically have a JFrame which implements KeyListener . Initially it recognizes when a key is pressed and typed, etc. But after I click a button on the frame, it stops recognizing any further keyEvents. Any thoughts? Thanks!

  • TV HELP!! 62HM84

    My lamp on my tv went out - model 62HM84.  I ordered a replacement and installed it.  When I turn it on it makes a loud rapid clicking noise (sounds like coming from the lamp) and doesn't ever turn on.  According to the owners manual chart it says th

  • To Copy a Datasaource

    HI All I want to know is there any chance to copy a business content datasource in to other datasource by changing it's name in to a Zname. Thanks BW User

  • JDBC-ODBC Bridge does not support Unicode UTF-16

    Hi I'm using Jdeveloper 10.0.3 IDE in order to develop an application for data transformation between MS Access 2003 (source) and Oracle 10g (destination). Clients use Windows XP. JDBC-ODBC Bridge still does not support Unicode UTF-16 which is the Ch

  • Linking to triggers...possible?

    I am just getting into web design, so I don't know a whole lot about css, html or java, but I'm willing to learn (that's why I like Muse). Is it possible to create a link to a trigger? For example, I have a flag football site that lists out the teams