Can travel allowance be for entire trip?

Hi,
My client gives 90% of travel allowance before the employee goes on trip. Can the employee pre-plan the trip get the travel allowance and then go for trip in SAP? If there are any deviations, can he later come and edit the travel plan so that he can claim actual expenses?
Thanks,
-Sasi.

closed

Similar Messages

  • Travel expense only for abroad trip

    Hi SAP Gurus!
    I have the following requirement: I have to create a new travel expense type; employee may use this travel expense only for trip abroad (field PTRV_HEAD-ZLAND = "ABR").
    Where can I insert this check?
    Thank you in advance, best regards!
    Stefano

    Yes please.. i need to know where I can find that information..... if Attachments are present in a Trip or not. Inside a trip, where we can attach some excel files in the top left corner of the screen....
    /Thanks, Krishna

  • How can I allow cookies for only my specified sites?

    Cookies need to be enabled for my online course to work properly. However, I don't want to allow all cookies from other sites I don't trust.
    How can I control which sites that I allow cookies for?

    Hello Leonaruth,
    Welcome to Mozilla Support!
    Here is an article explaining some cookie settings, https://support.mozilla.org/en-US/kb/enable-and-disable-cookies-website-preferences#w_how-do-i-change-cookie-settings
    Here are some details specific to your question:
    #1 go to Firefox->settings from the menu bar.
    #2 Go to the Privacy tab, and change History to "Use custom settings for History".
    #3 Deselect "Accept cookies from sites" to deny cookies.
    #4 Click "Exceptions" (to the right of the checkbox) and specify the website you wish to have cookies from.
    #5 Click Allow and the site will be added to the list of sites that you accept cookies from.
    I hope this helps.
    Jørgen Juel

  • Alternative Cost assignment for entire trip

    Hi all,
    In PR05 screen when an employee books his travel expense.he will be allowed to give a cost center in thw drop down.
    In the drop down box i am not getting any values to select.
    where i can do this configuration so that i can get a cost centre visible for selection in the drop down box.
    please help me on this.

    yes i want to book the cost of trip to some other cost center other than the employee master cost center.
    please help me where the config to be done

  • Getting cost assignment for entire trip

    Hi all,
    I'm trying to get the cost assignment of a trip (like you can see in transaction PR05) in an ABAP report.
    Does anyone know if there is a FM to get it or in which table the data are stored.
    Thanks in advance,
    BT

    Thanks for your help Ravi,
    Bapi BAPI_TRIP_GET_DETAILS returns the information I was looking for.
    BT

  • Alternative cost assignment for entire trip if different to master CA

    In the travel manager, i am not getting the drop down for choosing the different cost assingment. Previously i was getting this functionality and now I am not getting it. Is there any settings involved for this. Appreciate help.

    Hello,
    Please check your setting base on the note 312102. I think you have put more than one cost assignment in mandatory field which makes only possible in the Alternative Cost Assignment to enter your data.
    Regards,
    Raynard

  • Where are wagetypes stored for each trip?

    Hi All,
    I've implemented the BADI to alter the wagetype assignment of expense reports (SET_DIFFERENT_WAGETYPE from the BADI TRIP_RECURRENT_DEST)
    Where can I find the stored data for individual trips to ensure that the BADI is working as expected?
    I've looked in transaction PRTE, but I haven't found the wagetype there.
    Thanks,
    Scott

    ROT is empty even though the BADI ran.  Maybe the wagetype is not stored, but instead used in calculating KONTI?
    Table               Name                                           Number
      PTRV_HEAD         General Trip Data (Not Period-Limited)          Trans.
      PTRV_PERIO        Gen.Trip Data(I) of Period                      Trans.
      FITV_HINZ_WERB_S  Add. Amounts / Income-Rel. Expenses: Trip       Trans.
      FITV_HINZ_WERB_B  Deduct Br. from A-Recpt, Add. Amnt/ IC Exp.     Trans.
      BELEG             Indiv.Recpts                                       2
      EXBEL             Additional Receipt Information                     2
      EDITOR            Editor                                             1
      ABZUG             Deductions                                         5
      ZIEL              Stopovers                                          1
      VSCH              Advances                                           0
      ZWECK             Additional Trip Information                        0
      KMVER             Miles/Km Distrib.                                  1
      AEND              Trip Changes                                       5
      STATU             Trip Status                                     Field
      KONTI             Acct Assignment                                    1
      KOSTR             Cost Assignment for Entire Trip                    1
      KOSTZ             Stopover Costs Assignment                          0
      KOSTB             Indiv.Receipt Costs Assignment                     0
      KOSTK             Miles/Kms Flat Rate Costs Assignment               0
      USER              User-Specific Data                                 0
      V0SPLIT           Structure of ITAB V0SPLIT                          0
      BELER             Individual Receipt Results                         0
      PAUFA             Travel Costs Results                               0
      VPFPS             PD Rates for Meals                                 0
      VPFPA             Meals Deductions                                   0
      UEBPA             Accommodations Per Diem                            0
      RUW               Travel Expense Transfer                            0
      ROT               Transfer to Payroll, Financial Accounting          0

  • Can we specify prefix for an auto increment column

    Hi all,
    I want to create an auto increment column in oracle using oracle sequences.
    But i want to specify a prefix for the value appearing after increment.
    Prefix will remain constant.
    If we can how can i do that.
    And one more thing is i will call the sequence using a trigger only for a specified condition.My doubt here is can i allow nulls for auto incrementing column
    With Regards

    <s></s>
    -- Samples.
    create table tab1
    (id   varchar2(6) constraint p_tab1 primary key
    ,data varchar2(255)
    create sequence seq_tab1;
    create or replace
    trigger trg_tab1
    before insert on tab1
    for each row
    declare
      p_prefix varchar2(2) := 'AA';
    begin
      if (:new.id is null) then
        select p_prefix||to_char(seq_tab1.nextval,'fm0009') into :new.id from dual;
      end if;
    end
    -- Test
    SQL> insert into tab1(data) values('abc');
    1 row created.
    SQL> insert into tab1(id,data) values('BB9999','xyz');
    1 row created.
    SQL> select * from tab1;
    ID
    DATA
    AA0001
    abc
    BB9999
    xyz

  • How to set version limit for entire site collection

    Hi,
    We have more than 500 document libraries in one site collection. I see some of them have more than 50 versions & taking lot of storage space. So planning to limit the version's to 3 Major and 3 Minor for entire site collection. How can we do that? I
    know we can set to individual library by how can we do that for entire site collection?
    Thanks
    Rithu.
    Rithu

    The version limit is a library specific setting, so you'll need to use PowerShell to set the property value on each library in every site in the site collection.  Here's a sample script that sets if for one library.  You'll need to expand the script
    to walk the sites recursively and run this for every library.  
    https://consultantpoint.wordpress.com/2012/06/15/powershell-setconfigure-document-library-with-majorversionlimit-majorwithminorversionslimit-require-to-checkout-before-editing/
    Please Note: Changing these settings won't delete old versions.  That only happens after each item in the list or library is edited.  
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Std iview page for Leave Travel Allowance (LTA) on portal

    can you pls help me with the std iview page for Leave Travel Allowance (LTA) on portal

    Hello Akshta,
    LTA application is a part of claims and advance application in ESS.  For using this application you need to be on some minimum B.P. level, after that you can use this application. You can check the application through Content Admin role in ESS.
    and from the backend side you need to do the customization in following tables:
    V_T77WWW_CLREIM
    V_T77WWW_CLRECH
    V_T77WWW_CLLNPMT
    V_T77WWW_CLHLDC
    V_T77WWW_CLHLDCO
    V_T77WWW_CLMLDC
    V_T77WWW_CLMLDCO
    V_T77WWW_CLPDFMT
    V_T77WWW_CLDCLTX
    V_T77WWW_CLPRVLG
    V_T77WWW_CLAPRPR
    V_T77WWW_CLMLSEL
    you can find these in IMG also.
    Best Regards,
    Deepak.

  • What is the business object for travel allowance?

    Hi All,
    We are In ECC 6.0.
    i am not able to find the business obejct for travel allowance
    Can some one help me by answering it as early as possibe?
    thanks in advance,
    raj

    Travel related BO is BUS2089.
    Wflow Template:WS20000050
    Thanks
    Arghadip

  • Travel allowances for the applicants ?

    hi all,
    can anyone help me out in
    Travel allowances for the applicants ? applicants who attend interview should be give TA. how to config that and whts the infotype and how to connect it payrolls.
    its urgent please. points are ready for solutions.
    regards,
    vikram

    I just bought a Gecko Hi Fi Traveler case and it absolutely rocks! Very well made. Here is the link
    http://www.geckogear.com.au/productipods/for+ipodhi-fi?pid=1
    Alex
    G4 2002 Quicksilver 867 mhz 1.12 GB Ram, PB 1.5mhz   Mac OS X (10.4.7)  

  • HT1665 I have a World Travel Adapter Kit for use with my iPad. can the plug adapters also be used on the Mac Pro charger to charge up my laptop when travelling or is a special converter needed.M

    I have a World Travel Adapter Kit for use with my iPad when traveling abroad. I know this charger can be used on an iPhone, can the plug adapters also be used with the charger of a Mac Book Pro or is a special converter required?

    Is there any concern about the type of travel adapter kit? For instance, some instructions indicate they are for heat creating appliances (hairdryers, curling irons, etc.). I bought such a set, but do they present any issues if used with more delicate electronic circuitry (for iPads, iPods, or with camera battery chargers). I am leaving for the UK on Monday and need to get it right - are they too strong for the Apple products if they are not to be used with computers? What other options are out there?

  • Can I set sidekick's Allowed Components for a parsys at the Template level?

    The components page section on parsys[1] explains that you can set the sidekick's Allowed Components for a parsys by clicking Design Mode (ruler icon) in sidekick, then clicking Edit on the parsys and putting a checkmark on the components you want.  We are defining templates for our authoring users and I don't want them to have to go through that effort for every page.  I want to define something at the Template level which specifies the Allowed Components so that the user can use WCM New Page and the parsys on the page will already be set up right.  How do I do this?
    Our template has sling:resourceType=/apps/hello/components/ourpage, and ourpage has a JSP which specifies:
        <cq:include path="par" resourceType="hello/components/ourparsys"/>
    We just copied ourparsys from the foundation parsys.  Inside it has a design_dialog, which I double-clicked in CRXDE Lite and I see the Design View ("Edit Component," "ParSys (Design)").  I put a checkmark on one of the Allowed Components, clicked Save, but the checkmark was not saved.  When I closed this view and double-clicked the design_dialog again, the checkmark was gone, and when I went to WCM Websites and made a New Page from our template the sidekick still did not show our desired component.
    So please advise, is there any way to set Allowed Components so it will take effect on all New Page webpages made from a given template?
    [1] http://wem.help.adobe.com/enterprise/en_US/10-0/wem/wcm/default_components.html#Paragraph System (parsys)

    Thanks, I was expecting to define this on the Template but you are completely right, it is the Designer in /etc/designs.  One thing I noticed that I want to point out to people is that when I edit a New Page instance in Design View, click Edit on a par, that it does in fact create this property "components" on the par inside /etc/designs/ourdesign, but it uses type String instead of String[] Multi.  So I deleted the scalar "components" and remade a new array "components" property with String[] Multi.

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

Maybe you are looking for