Can Trx. PPMDT be called by the ITS in the portal ?

Hi ,
Trx. PPMDT - Manager's Desktop , be called by the Portal via the integrated ITS ?
We did try and it did not work !
Thank you .

chanchan05 wrote:
You could do that on a PC if I remember correctly. You need optical focus lenses to do that on a camera. I am not aware of any cellphone camera that could do that.
well, most modern phones have that feature, however the moving distance of the lens is very little, it's just for being able to take macro shots with it. you can observe this by the slight sound the phone makes when is focusing on something, that's the sound of the lens, moving in those 2 milimeters or so. but then again, i might be wrong
If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!

Similar Messages

I can't make a call? The usual response I get i get is to check phone settings?. I tried to reset the network already still the same

I can't make a call? The usual response I get i get is to check phone settings. I tried to reset the network already still the same problem. What is the possible problem? I can send message and receive calls

Hey Rache0105,
Some of the steps you've already done, but I would run through the iPhone Troubleshooting Assistant for call issues. You can find it here:
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Why can't I record calls with the iPhone?

Hi,
Why can't I record calls with the iPhone? Every other mobile can! That's quite pitty ...!

Nonsense. There are many places where you are not allowed to take photos or video but those functions are included. Apple assumes no responsibility for them. Apple would not be responsible for managing the recordings on the phone either. It's most likely because Apple is located in California and in THAT particular state, both parties have to be informed of the recording. Most states do not require that. If Apple were located in another state (e.g. Alaska) there would be no restriction.
All the apps that record calls store those recordings in their servers and charge you a fee. It would be preferable to have the calls stored only on the phone so no one else could access them. The iPhone has the technological capability; we have just been restricted from having this functionality without paying a 3rd party.

CAN TRACE A KEEP CALL TO FIND ITS LOCATION

CAN YOU TRACE A SKYPE CALL TO FIND ITS LOCATION ? I AM BEING SPAMMED BY A SKYPE USERAND WOULD LIKE TO FIND HIS LOCATION , HE LOOK VIDEO OF ME AND IS USEING IT FOR ,,,,

report the user to [email protected]
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

How can we make a call to the Data base in the SAP Scripts?

Hi All,
How we make a call to the data base in scripts?
I think we can use the PERFORM statement to achieve the above functionality.
Pls correct me if i am wrong?
Regards
Abhilash.

Hello.
If you want to access database in the script itself (not in print program) yes, you can use PERFORM statement.
In your script, use:
/: PERFORM F_FORM IN PROGRAM ZRFIRFS05
/: USING &VAR1&
/: CHANGING &VAR2&
/: ENDPERFORM
Then, create a program ZPROG (ZRFIRFS05 in my case) with a structure like this one:
REPORT ZRFIRFS05 .
FORM f_form TABLES in_par STRUCTURE itcsy out_par STRUCTURE itcsy.
DATA: l_data1(10).
READ TABLE in_par WITH KEY name = 'VAR1'.
CHECK sy-subrc = 0.
l_data1 = in_par-value.
* SELECT .... "YOUR SELECT TO DATABASE
READ TABLE out_par WITH KEY name = 'VAR2'.
CHECK sy-subrc = 0.
out_par-value = l_data3.
MODIFY out_par INDEX sy-tabix.
ENDFORM.
Regards.
Valter Oliveira.

Can not receive FT calls on the New Ipad Ipad3

I Recently Bought a new 16 GB Ipad 3 Cellular + Wifi. I have been facing a peculiar issue with receiving FT calls on my IPAD.
IPad: Apple ID: [email protected], No Cellular Subscription
IPhone: Apple ID: [email protected], ATT
1) When I try to make a FT call over wifi from Iphone 4 to IPAD the FT call does NOT go through most of the times. However, for some unknown reason once or twice out of twenty tries it might go through.
2) When I try to make a FaceTime call over wifi from Ipad to Iphone 4 it always go through.
3) If I try making a FT call from Iphone4 to Ipad immediately after above mentioned scenario 2 , Ipad always receives FT calls. But it may not work again if I try FT from Iphone to IPAD after 15-20 mins and I have to repeat Step 2.
P.S: I have another Iphone4 and I am facing the same issue while trying to make FT calls on the other Iphone4 (No SIM, only on WIFI). I have tried it on various wifi networks but the result is the same. PLEASE HELP!
Thanks in Advance.
Sunil..

OK. I am having a little bit of trouble understanding your responses, but let's start with this since you are having an issue with other apps as well.
Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Let the iPad start up completely and then try again.

Custom logon module not called by the portal

Hi, all.
I need some help urgently on this new portal requirement. There are some sensitive ESS/MSS iviews that we need to give the users an additional logon challenge. The normal ESS/MSS iviews will be using SSO. This one will still use SSO, but have to pass the userid/password challenge.
We have decided to use the authentication scheme. Also, the "form" logon stack has been modified with only one logon module, which is our customized one. To create the java project, jar and library, we are following the link: http://help.sap.com/saphelp_nw04s/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/frameset.htm
Here's the extract of our authscheme.xml:
        <authscheme name="certlogon">
            <authentication-template>
                client_cert
            </authentication-template>
            <priority>21</priority>
            <frontendtype>2</frontendtype>
            <frontendtarget>com.sap.portal.runtime.logon.certlogon</frontendtarget>
        </authscheme>
        <authscheme name="coo_secure">
            <authentication-template>
                form
            </authentication-template>
            <priority>40</priority>
            <frontendtype>2</frontendtype>
            <frontendtarget>com.sap.portal.runtime.logon.basicauthentication</frontendtarget>
        </authscheme>
        <authscheme name="basicauthentication">
            <authentication-template>
                ticket
            </authentication-template>
            <priority>20</priority>
            <frontendtype>2</frontendtype>
            <frontendtarget>com.sap.portal.runtime.logon.basicauthentication</frontendtarget>
        </authscheme>
The authscheme is called coo_secure. When a user clicks on the iviews with the coo_secure authscheme, a userid/pwd prompt pops up. But it does not accept whatever I type in. From the defaulttrace, I do not see any hint that our customized logon module was ever called.
Is there anyway to turn on portal tracing to see what is going on?
Thanks,
Jonathan.

Hi Jonathan,
Did you solved the problem with the custom logon module?
We have a very similar scenario. I followed below help site to implement a custom logon module for particular iviews.
http://help.sap.com/saphelp_nw70/helpdata/EN/54/f91fba71ae48309e4267b4a36fa47b/frameset.htm
and also the documentation:
SAP Netweaver Developers Guide - Integrating Security Functions
But I am not able to get my own custom login module with the custom authscheme running.
If I access my specific IViews that requires additional custom authentication I get the portal login page again. After giving login data I get the error message:
Java iView Runtime
An exception occured while processing your request.
If this situation persists, please contact your system administrator.
If you solved your problem, can you please share the solution with me?
Thanks,
Regards,
Yasar

How can uploap a file pdf in the portal?

Dear Experts.
I have the following requirement.
The company want that I create a link in a subarea of the portal of Employee Self-Service and that call a file test.pdf and the employee can display this odcument.
I found in this forum that this is posible upload this file in the KM; But i don't have idea of How do this.
The steps that I have idea is when I have the URL for create the resource and the service and assign this service to a subarea in the portal of Employee Self Service.
Anyone can help me with some suggestions?
What are the steps?
Best Regards

Hi ,
At first you need to upload the required pdf file in KM repository uder documents folder .
You can crteate your own folder inside the documents folder and then upload the pdf file there.
After that you need to create KM document iview in PCD.
Below steps are for creating the KM Document iview
1) Select the Folder you have created in PCD for project purpose.
2) Right Click the Folder and in the Panel, choose Iview.
3) In the displayed iview wizard, choose iview template (This is the Source Type in the RoadMap)
4) Click next, in the template selection wizard choose KM Document iview and click next
5) In the general properties provide iview name, id and description and click Next button
6) In the next step click Open Object for Editing and click ok button
7) In the properties view Edit path to Document property
For Example there is a document with some name in the Folder created by you which is under Documents folder. Give the path of this document.
Eg: /documents/<your folder name>/<filename>
8) Save the changes and Select preview for testing then the iview displays your file contents.
Refer the below link for creation of iview.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0235c19-9493-2b10-64a5-8487b23a7a41
Hope this will solve your problem.
Thanks,
Sandip

How can I bind an IIS to the Portal 6.0 on a linux server

Dear all,
I am very new to the topic of Enterprise Portal.
Our intention is, to develop .NET IViews and deploy them in the Enterprise Portal.
The Enterprise Portal Server is set up on a linux machine.
The Guy who did install the Portal Server, has no idea how to "integrate" the Microsoft IIS to the Portal.
After deploying my .net Component, i tried to view this component in the portal (by right clicking the mouse on the Component in in the .NET Solutions Explorer).
This gives me the following error:
Portal Runtime Error
An exception occured while processing a request for:
iView:N/A
Component Name: N/A
Could not find portal application com.sap.portal.dotnet.framework.
Exception id: 02:06.......
See the details for the exception ID in the log file
I think that this has something in common with integrating the IIS on the Linux Machine, and maybe additionaly installing the pdk.net on the IIS webserver machine which should be used.
Thank you for your help.
Regards
Can anyone of you explain me the cause of this error?

Hi,
Developing .Net Iviews for SAP EP is best done using the PDK for .net available for download on SDN.
We are using this succesfully with a Portal Installed on AIX.
The .Net PDK itself contains a plugin in Visual Studio .Net, a SAP .Net Framework (I think this corresponds to error message) that has to be installed on a .Net server and 2 components to be deployed to the portal that allow you to do some configuration for .Net applications (e.g. the server where the SAP.Net runtime is on,...)
Please have a look into the documentation available here on SDN :
http://www.sdn.sap.com > SAP Netweaver Platform > .Net Interoperability => In the right-side column on the bottom under "HELP" you will find the PDK.Net documentation guides.
This documentation is rather clear and helpfull !
Regards,
Igor Vernelen.

Can you block phone calls on the iPhone

Can you block a phone number on the iPhone?

As an alternative to calling you can log into your carrier account.
ex for Verizon Wireless>>
My Verizon>My Plans & Services>Manage Verizon SafeGuards>Call and Message Blocking enter your numbers to be blocked here.

I was using my iPhone 5 and the screen randomly went black. I can still hear incoming calls but the screen stays black and unresponsive and stays black. My lock button stopped working last week so I can't restart the phone. What can I do to solve this?

I had an appointment this morning with Apple to try and solve the problem with my lock button ranomly not working anymore and a few hours before my appointment with the Apple store i was using my phone and my screen randomly went black and stopped working. And the p.roblem now i cant use it. I tried restarting the phone but I can't restart it due to my lock button not working so i need help with a solution on what i can do. I missed my appointment today because i could no longer use my phone and i'm now stuck using my laptop. I did also try connecting it to my MacBook but the screen was still unresponsive and black. I rescheduled my appointment to Monday to see what is wrong with my button and screen but in the meanwhile i would like to know if there is anything i can do or if i would just have to wait until monday and take it in to Apple. Any help would be really appreciated as i am phonelss for now until i take it in to Apple in a few days. Thanks.

You wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...

I can hear my incoming calls but the person on the other line can't hear me. How can I solve this problem?

It's been more than a week since I had this problem.
As I said I can mostly hear the person on the line but the person on the other line cannot hear my voice.
How can I fixed this problem? Do I have to go to the apple store? My warranty has expired and I can't get to the apple store easily becasue it's too far from where I live:( Please help.

Does your iPhone say headphones when you adjust the volume, even when they are disconnected?
You can try disconnecting and reconnecting the headphones 5-6 times or restoring the iPhone.
If that doesn't do it, you can setup service for the iPhone online or have a Genius take a look at it.

User profile can't make service call to the taxonomy

Hi
I am trying to add a custom property to User Profile Application service. I have ticked "Configure a Term Set to be used for this property" for the select box to appear. The select box under "Pick a Term Set for this property"
is empty. I do have a managed metadata service application and there are data in the taxonomy.
Has anybody experienced this or any suggestion as to how I can get data in my taxonomy to appear in "Pick a Term Set for this property" select box?
Thanks
S.

Hi S,
Please make modification for Managed Metadata Service Connection and test the issue:
1.
Open Central Administration > Application Management > Manage service applications
2.
Select Managed Metadata Service Connection and click Properties in the ribbon
3.
Check the box “This service….column specific term sets.”
Regards,
Rebecca Tu
TechNet Community Support

Can you do video calls with the Itouch

Last night they kept showing the Itouch with texting and video conferencing, does it work? Thinking about getting one and need some info.
Thanks for any replies
Pam

Yes, the iPod can text to other iOS 5.0+ users, but only iOS 5.0+ users.
Also, yes, the iPod can do video confrencing to Macs, iPhones, iPads, and other iPod touches.
*Both of these services require a valid Wi-Fi connection*
Prices: 8GB $199
32GB $299
64GB $399
Colours don't change the price.

Could a Webdynpro Java knows from what page is called in the Portal?

Hi everyone,
Could a Java Webdynpro in execution time knows from which PCD page is been executing?
Let's clarify, or give an example...
On the PCD, I have one WD4J iview, and I added to two different PCD Pages, so It will be nice if the webdynpro could know in wich page is executing from.
Anything that I could use from the API?
Thanks in advanced
Regards
Jose

<< Do not post the same question across a number of forums >>

Can Trx. PPMDT be called by the ITS in the portal ?

Similar Messages

Maybe you are looking for