Can two computers use USB to print to the same printers?

My wife and I have two macs, side by side, one a G5 iMac and the other a G5 PowerMac, both running 10.5.1 We have four printers, and we both use all of them at different times. We have one powered USB hub with four ports.
What we would like to do is have all of the printers available to each of us. We had tried Bluetooth and that works OK, but as we understand it both computers have to be turned on to connect that way, and sometimes we are not both at our computers at the same time.
Is there a way for us to do this?

You can turn all 4 printers into network printers using a 4 USB port to ethernet print server like this one at Amazon:
http://www.amazon.com/Keyspan-US-4A-4-Port-Server-Mbps/dp/B0001NA3L2
I've used devices like this for PC networks, but this one says it's also compatible with Mac OS X.2 and up. There are many more of these print servers available, so it's probably a matter of budget for quality.
When I've set these things up on PC's I first had to connect the printers directly to the PC so that I could get the drivers for the printer to install. Then I changed them to network printers. On your Mac's you've already got the drivers working for the different printers, so you won't have to deal with that until you replace a printer with it's new driver.
Of course, for this to work, you will have to have an ethernet network to plug the device into, but you didn't provide any information about your connectivity options.
Neither Mac has to be running for the other one to print.

Similar Messages

  • Can two computers use same iTunes library on a network drive?

    Can two computers use directly (rather than share) the same iTunes library on a network drive? 
    My media library is on a network drive attached to my Airport Extreme. Right now I share the library with my desktop Mac. I can share fine, but I would like to be able to add, delete, and make other changes in the media library from both computers. The two computers would not be accessing the library at the same time as I am the sole user of both.

    I appreciate your input and I think you're right about this being impossible. But just to clarify, you say I can't "have multiple machines accessing the same music files from a shared location." I can have multiple machines accessing the same music files from a shared location--I just can't have them accessing the same music files simultaneously--which may have been what you meant. For my situation, I think it will be less work to just quit iTunes on my server when I want to run it on my client (using Chicken of the VNC). It's not ideal, but it's less time-consuming than periodically syncing three computers.
    Again, thanks for the input.

  • Can two users work on different files of the same project?

    Sorry if this has been asked already...but can two users work
    on different files of the same project? How would that work? Would
    it work something like this?
    1. From RoboHelp 7, user A checks out the entire project.
    2. User A checks in the files they are not working with.
    3. User B checks out the project but can only 'edit' the
    files that have been checked in by user A.
    Is this how the source control works?

    That's the basic idea. User A doesn't actually have to check
    out the whole project, though. RSC will selectively check out only
    the files that are actually getting changed. Both writers will have
    a complete copy of the project on their local machines, but the
    files are read-only until they are literally checked out, which is
    on an as-needed basis unless the writer explicitly checks them out.
    G

  • How to set two Star's TSP100 receipt printer on the same mac ?

    Hello
    For my restaurant I use a FileMaker homemade software that can use two ticket printers of the same type (Star's TSP100 receipt printer).
    One is set as "Kitchen" in the underground kitchen and the other as "Desk" in the main floor.
    Software must prints orders for kitchen on the correct printer and other receipts on the other printer. It uses Applescripts command to switch printer before printing.
    Sometimes the two printers are switched and reports are printed on the bad printers.
    Software is working correctly, orders for kitchen are always printed on the same printer and other receipts are also printed on the other printer. When printers switch, the kitchen receive receipts for desk and orders for kitchen are printed on the desk printer.
    How can I fix the two printers to be sure that every orders and receipt are printed on the correct printer.
    Thanks for your help

    Let me first say I have never tried to do that...
    I believe this is completely about the driver. 1 driver can only correctly identify one printer in print & scan prefs. I think you need separate drivers and separate ways to identify each printer.  Like - another copy of the driver with different named file(s); and a printer utility that allows you to change printer name.
    For Epsons the USB setup includes the Serial number - which allows the driver to differentiate. Does your driver do that? Maybe there is an alternate driver you can use for one of the printers?  Check out the free Gutenprint driver.  Search for gutenprint mac.

  • Can two computers, one USB, other LAN, both use an HP 6310?

    Hello,
    Might be daft question. I have an HP 6310 all in one which I sometimes use (with difficulty, but does work) with Bluetooth and sometimes with USB. This works fine with one computer that was originally set up with the USB option.
    I now have two computers and also a wired (LAN) network through a network switch and the router. Can one computer be set up with the USB software for local printing and the other with Ethernet,and still access the printer? You might ask why I don't just use the LAN on both, but I would just like to know if it is possible. I guess it comes down to whether the setup sends data to the printer to determine which method of connection to use, or is the printer just "dumb" and responds to whichever source is connected to it.
    Naturally, as the only user of the network, I would not be using both computers at once for printing to avoid any conflict.
    Many new printers are supplied with wireless 802/n capability, but is their a device that can convert the 6310 to wireless 802/n?
    Thanks

    Hello Meldrewoflewes,
    Your Question " Can one computer be set up with the USB software for local printing and the other with Ethernet,and still access the printer? "
    Answer : Yes
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Can two computers use the same backup??

    I restored a seperate Macbook pro from the Time machine backup of MY Macbook. So I have two computers operating from the same backup. Is that recommended??

    Yes, it should do. Once you change the name of the computer make sure you reset TM
    See A4 here. http://pondini.org/TM/Troubleshooting.html
    When you start the backup it will create a new sparsebundle.. (like a virtual disk that holds the backup on network drives) and you will be able to check that it is correct because it should be a new full backup.
    Then you can do a full backup of one of the machines.. the other machine can continue to use the original backup.

  • How can two computers use time machine on same Time Capsule?

    I just purchased a Time Capsule and successfully backed up my computer. My brother is on the same network but cannot get Time Machine to back him up on the Time Capsule without my backup being deleted.
    How does one enable Time Capsule to serve as back up for two different computers?

    There are some options:
    Manually delete a number of old backups from the Mac that's "hogging" the space, per #12 in  Time Machine - Frequently Asked Questions.  After "compacting" that sparse bundle per the pink box there, you may be able to limit the maximum size of it, per #A8 in Time Machine - Troubleshooting.
    Another is to connect a USB drive to the TC (likely with a powered USB hub), and back the other Mac up to it, instead of the TC's internal HD.

  • Can I change the way that I connect my two computers using migration assistant whithout interrupting the process

    I am in the process of using Migration Assistant to transfer my 2008 MacBook Pro to my MacBook Pro with Retina.  I am currently using USB to transfer and it is taking a long time (as expected).  I am trying to increase the speed of this process.  Am I able to connect ethernet to thunderbolt without stopping the process? Can I just plug in the cable and not have the hault the process, but speed it up? Thanks!!!

    Since you're just sending data, it won't "mess" things up, but you "may" have some cleanup on your hands, depending on what's been transferred. If you want to stop: Command + Q on both machines.

  • Can 2 workstations use 1 catalog not at the same time

    I have my primary workstation here in my office where I do all editing etc.
    My printer unfortunately is 2 floors up, so I am bussy running up and down for every single sheet I print.
    So, I am thinking on setting up a workstation near the printer as well, just to do the printing, not any editing.
    My idea would be to save and use all images and catalogs on my NAS and open the same catalog on the other workstation.
    Would that work?
    thnx
    Peter

    Peter,
    No. You cannot have your catalogue on a network drive. Lightroom won't allow it.
    The usual way of sharing a catalogue between two computers is to put the catalogue and all images on an external hard drive (preferably with a fast (not USB 2) interface) and carry that drive between machines. That might help in your case.
    Hal

  • Error -50103 when I am trying to access two channels on USB 6366 board in the same time

    I am trying to use two DAQmx tasks attempting to access two channels from
    USB-6366 in the same time. But it gives me an error Error -50103. So I looked
    online and find out it says ' It is not possible to have multiple DAQmx tasks
    attempting to access the same physical device. '. So I am wandering how can
    collect data from my ai0 and ai1 channels in the same time? Here is my code,
    and please help me out. Thanks very much
    Attachments:
    error_-501013.vi ‏27 KB

    Simple - use a single task with multiple channels. Surely the answers in all of the related posts said that. The channel list is just dev1/ai0:1.

  • Can TWO different Zen Micros be installed on the same computer w/o confli

    I have a Zen Micro 5G, and would like to buy a Zen Micro Photo 8G as well. Does anyone know if there will be conflicts to install the software (firmware?) on the SAME computer? I had conflicts when I tried to install two different Palm Pilots on the same computer - the software of the first Palm no longer worked properly. Perhaps the new one "overrides" the first? I don't know if this might happen with the Zen Micro and Micro Photo.
    Also, does anyone know if the Micro Photo fits into the Zen Micro Traveldock?
    Thanks so much for any insight you can offer!

    SilentC wrote:
    I have a Zen Micro 5G, and would like to buy a Zen Micro Photo 8G as well. Does anyone know if there will be conflicts to install the software (firmware?) on the SAME computer? I had conflicts when I tried to install two different Palm Pilots on the same computer - the software of the first Palm no longer worked properly. Perhaps the new one "overrides" the first? I don't know if this might happen with the Zen Micro and Micro Photo.
    Also, does anyone know if the Micro Photo fits into the Zen Micro Traveldock?
    Thanks so much for any insight you can offer!
    I don't think they will conflict because if you use mediasource, you can have different music libraries etc...
    I believe the microphoto fits the traveldock, but don't hold me to it

  • Can two PCI-e eSATA cards work at the same time?

    Hello,
    I've been using a cheap, 2 ports sil3132 eSATA card for the past 8 months or so. I just bought a second one as I needed more ports, but the two cards are not working well together.
    First: is there a solution?
    Second: would an eSATA from another maker work better?
    Thanks
    Loa

    Maybe they share the same driver and chipset and cause an issue?
    I have 2 port Sonnet Tempo E2P and E4P but they are different chipset and drivers.
    http://eshop.macsales.com/item/Sonnet%20Technology/TSATAIIE4P/
    Yes you can. FirmTek 4-port is excellent and Newertech has SATA III 2-port (and no driver needed).
    http://eshop.macsales.com/item/Newer%20Technology/MXPCIE6GS2/
    http://eshop.macsales.com/item/Firmtek/SATA2ME4E/
    http://eshop.macsales.com/item/Newer%20Technology/MXPCIE6GS2/

  • Can two people have different itunes accounts on the same computer ?, can two people have different itunes accounts on the same computer ?

    Can two people with two ipod touches have different itunes accounts on the same computer ??

    Yes but you they have to setup 2 different user accounts on the same computer.

  • Why can't i use wifi and bluetooth at the same time?

    I recently bought a Philips docking speaker that has bluetooth connectivity for streaming music wirelessly from my Ipod Touch. The bluetooth/speaker works great, but, my Touch won't allow me to be online AND use the bluetooth at the same time. This is really annoying when you want to listen to music and check your emails. Am I doing something wrong?? Any  help would be gratefully received.

    I can use by BT headphones while my iPod is connected to the internet via wifi with no problems. I am uncertain how the Philips' system works.  Does it have its own BT transmitter/receiver or doe it use the iPods to stream to its speaker?

  • Can two DSL routers (not wireless) be in the same house at the same time?

    Hi, I have a question about using DSL. We currently connect to the internet with a Westell DSL router (not wireless). The phone cord goes from the jack to the router and an ethernet cable goes from the router to our computer. Is it possible to hook up a second computer the same way in another room using a different phone jack? We've had nothing but problems trying to get wireless to work, and I would prefer to stay with wired routers. I would ask Verizon's tech support, but I can't seem to get through to a live human being. Thanks to anyone who can help.

    As stated above, "No".
    Maybe you can get a WiFi range extender for your WiFi base station.
    Maybe you can run an ethernet cable to the back room.
    Maybe your phone system is actually using CAT5 cabling (unlikely) and you can run ethernet over unused wires in your house phone wiring.
    Maybe you can get a pair of Ethernet-over-Power-line adaptors, and connect the back room with the front room using your electrical wires.
    Maybe you can use a phone outlet that is half way between the front and back rooms, and then the signal will be strong enough for both locations.

Maybe you are looking for

  • Unable to use my apple id for facetime and imessage.

    I recently changed my apple id so that I was not sharing the same id with my son.  Now I cannot use my apple id for facetime or imessage.  I can use my son's id, but not mine. (So no network errors, just an id problem.)  I am using the latest softwar

  • User-exit  for displaying message in LT15

    Hi, I am looking for a user-exit (or another way?) for displaying a warning message when the user tries to cancel a TO via LT15 (under certain conditions). But the only user-exit that I found that would do the thing here is ZXLTOU02, but it's perform

  • Java.lang.SecurityException: Authentication for user system denied in realm weblogic

    I am looking for some help to deploy the application in weblogic6.0. This is what i did during the application deployment. Create a new directory under config as a new application. D:\bea\wlserver6.0\config\test under test created two other directori

  • How does FIND MY IPHONE work?

    I'm trying to figure out how I am notified that my phone is found if the phone is lost.

  • Using Automator to distinguish duplicate files

    This might seem like a silly question, but here's my problem. I have two folders with hundreds of image files in each...I would like to find out if there are any files in folder A that are not in folder B.. It would seem like automator could do this