Can two DSL routers (not wireless) be in the same house at the same time?

Hi, I have a question about using DSL. We currently connect to the internet with a Westell DSL router (not wireless). The phone cord goes from the jack to the router and an ethernet cable goes from the router to our computer. Is it possible to hook up a second computer the same way in another room using a different phone jack? We've had nothing but problems trying to get wireless to work, and I would prefer to stay with wired routers. I would ask Verizon's tech support, but I can't seem to get through to a live human being. Thanks to anyone who can help.

As stated above, "No".
Maybe you can get a WiFi range extender for your WiFi base station.
Maybe you can run an ethernet cable to the back room.
Maybe your phone system is actually using CAT5 cabling (unlikely) and you can run ethernet over unused wires in your house phone wiring.
Maybe you can get a pair of Ethernet-over-Power-line adaptors, and connect the back room with the front room using your electrical wires.
Maybe you can use a phone outlet that is half way between the front and back rooms, and then the signal will be strong enough for both locations.

Similar Messages

Connecting two EA6500 routers via wireless bridge

Hi, I want to know how can we bridge two EA6500 routers via wireless. I do not want to use the lan cable. Please help.
Thanks,
anandp

This setup is not possible. You can only cascade the routers via wired connection. The access points on these routers are mainly transmitters, they're not receivers so you can't associate them wirelessly. You can, however, get a wireless bridge to do the job. Check out the Dual Band N Entertainment Bridge WET610N and Wireless N Universal Media Connector WES610N.

How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

Have a look at solutions in here https://discussions.apple.com/message/10689317#10689317
Regards
Stefan

Can two users work on different files of the same project?

Sorry if this has been asked already...but can two users work
on different files of the same project? How would that work? Would
it work something like this?
1. From RoboHelp 7, user A checks out the entire project.
2. User A checks in the files they are not working with.
3. User B checks out the project but can only 'edit' the
files that have been checked in by user A.
Is this how the source control works?

That's the basic idea. User A doesn't actually have to check
out the whole project, though. RSC will selectively check out only
the files that are actually getting changed. Both writers will have
a complete copy of the project on their local machines, but the
files are read-only until they are literally checked out, which is
on an as-needed basis unless the writer explicitly checks them out.
G

Can two people with their own iPhones use the same computer and iTunes?

Can two people with their own iPhones use the same computer and iTunes?

Yes. My wife and I each have our own Apple ID and used the same computer to sync our phones with iTunes. The best way to do this is set up separate user accounts on the computer. If you are logged in to your account on the computer and your wife wants to sync here phone, you would log out and she would log in. These keeps all your stuff separate and avoids a ton of confusion.

HT204053 can two different apple ids be used for the same imatch

can two different apple ids be used for the same imatch homesharing for music

Welcome to the Apple Community.
No.

I can send emails but not receive them. The sender address was rejected by the server

i can send emails but not receive them. The sender address was rejected by the server.

Your mail server doesn't like the sender's address for some reason, perhaps because his mail server has been blacklisted for spamming.

E72 bug: can't assign active notes to any of the o...

another bug with the one touch keys after the new firmware.
(previously the long hold contact key did nothing, which was fixed)
you can't assign active notes to any of the one touch keys. you can assign other built-in apps or 3rd party apps you install but you just won't find active notes.
nokia, please fix the one touch keys once and for all will you

I have Active Notes (not just notes) on the right selection key of my E72 (s/w v. 052.05), and they _are_ on the list. Perhaps the upgrades are region-dependent - I waited quite a while for my update (Danish/Norwegian/Icelandic/English).
Sorry, but I daren't select another function and go back to see if I can select Active Notes again, but they _are_ there now, but were taken over from the previous s/w version in my backup.
hughm_nyksj_dk

Error submitting tasks: Operation could not be completed within the specified time

I've created a Batch Application and I'm having an issue running a job. Its suppose to synchronize 2 azure blob containers.
In my JobSplitter, I compare 2 azure blob containers and find the files in the first container that need to be copied over to the second one. Just figuring out which files to copy over can take about 5 to 6 minutes the first time this is run depending
on the number of files that need to get copied over.
Once we have the files that need to be copied, we group them into sets and create a task for each set.
The exe that the TaskProcessor runs doesn't do anything just yet. All it does is write the arguments sent to it into a file. Nothing major.
On the last run, about 900 tasks were created. Four of the tasks completed successfully. I can download the output files for them just fine. The next 4 tasks failed with an error.
Looking in the JobLogs, I see this:
The job orchestrator finished
Failed to process job ac8dd4a3-d882-4ec1-847d-48844fa3e1f4: Error submitting tasks: Operation could not be completed
within the specified time. RequestId:27eab612-c8ce-4e4b-8dfb-00e7024c71ec Time:2015-01-29T00:37:03.5943898Z
Has anyone seen this before?
Thanks,
matt

This error is usually a transient error, typically related to an internal storage timeout. We're working on a fix for it.
In the meantime, if you go into the Batch Apps portal, select the failed job and click Reprocess in the command bar, Batch Apps should re-run the failed tasks and the not-run tasks. (Note that the tasks that already succeeded will not be re-run, and
we will not re-run the job splitter to create new tasks.)
Please let us know if you continue to see this problem or if reprocessing the job doesn't work for you.

Lines on screen, can't reset w home and sleep button at same time

Lines on screen, can't reset w home and sleep button at same time. Any advise. 4th gen. 32g touch

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

ERROR : Object could not be scheduled within the specified time interval

I have the next error Object could not be scheduled within the specified time interval.
When i schedule a report to be refreshed and the moment come when the report have to be refresh appear the error.
i check the error in the following path in the CMC
HOME> FOLDERS > USER FOLDERS > ... > "REPORT FOLDER" Instance Properties
Why i get this error?
Anyone can give me a good solution to solve this error?
Thanks!!!

Hi Ed,
The above error message is appearing due to the reason, when a large number of requests are scheduled to start at the same time, this may exceed the Maximum Number of Simultanius Requests that the deployment can support.
To resolve this error message, increase the end time on the scheduled instance. To increase the end time, use the following steps:
1. In the Infoview, browse to the desired report and click 'History'.
2. Find the desired scheduled instance and click 'Reschedule'.
3. Under the 'When' section, increase the end time for the scheduled instance.
Upon completing these steps, the error message no longer appears.
Hope it will help in resolving the error.
Regards,
Ritesh Nayyar

I want to save with alt s in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.

Question
I want to save with <nowiki><alt><s></nowiki> in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.
'''edit''', mod escaped the '''<nowiki><s></nowiki>''' to prevent line through question

Submitted too soon... To change your accelerator key for accesskeys to Alt alone (or a different combination), you can change a setting using Firefox's about:config preferences page.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''ui.k''' and pause while the list is filtered
(3) Make sure '''ui.key.generalAccessKey''' is set to its default value of -1 (or right-click and choose Reset if it is not).
(4) Double-click '''ui.key.contentAccess''' to open a dialog box to change the value from its current default (on Windows, 5) to your choice of the following:
* 2 = '''Ctrl''' (Fx default on Mac thru Fx13)
* 3 = Ctrl + Shift
* 4 = '''Alt''' (IE/Chrome/Safari default on Win/Linux)
* 5 = '''Alt + Shift''' (Fx default on Windows & Linux)
* 6 = '''Ctrl + Alt''' (Fx default on Mac from Fx14) (Chrome/Safari default on Mac)
* 7 = Ctrl + Alt + Shift
This should take effect as soon as you OK the dialog, so you can experiment in a separate tab. Other combinations are available if you want to try them. See http://kb.mozillazine.org/Ui.key.contentAccess (inaccessible at the moment?)

Trouble getting QuickTime to run on Windows 7. Error 46: Could not load or find the Quick Time Active X control.

Trouble getting QuickTime to run on Windows 7.Installation seems to finish successfully. When can try to open it I get the following error message:
Error 46: Could not load or find the Quick Time Active X control. I have reinstalled QuickTime and itunes several times but with no luck. Any suggestions?

Hi Pedro d,
Yes but no! I have tried everything step by step several times. Researching Error 46 on the web is scary business!! The gangsters are out in force on this one, begging to take your money! From a couple of trusted sites I have been able to make this much clear at least for Vista users, I'm using Windows 7 but I think they relate:
"Since the issue causing the Error 46 is that QuickTime registry entries don't have the correct permissions set, the repair is to go and reset all the incorrect permissions. However, this is a long and tedious process. The SubInACL tool from Microsoft (see the link in Resources) can change the permissions as a batch. The batch is defined by a CMD file that lists all of the registry keys to be changed. Once SubInACL is installed on your computer, move the CMD file with all the registry changes into the same folder, typically C:\Program Files\Windows Resource Kits\Tools. Right-click the CMD file, choose "Properties," check "Run this Program in Compatibility Mode" and select "Windows Vista (Service Pack 2)" from the drop-down menu. Click "OK." Do the same for SubInACL. When you're done, double-click on the CMD file and it will run. Your error should be gone."
I don't have the expertise to do this, do you? I wish that Apple or someone would take the bull by the horns and fix this because what I've read their are a lot of people having this problem. Any thoughts on this matter would be greatly appreciated.
Kindly,
pappy01545

Can i play music and use mirroring function at same time from ipad2 to apple tv

can i play music and use mirroring function at same time from ipad2 to apple tv

Yes, any audio during the "mirroring" funtion will forward to the appletv. This includes all system audio, games, apps, ect. If you slide the mute botton the side of your ipad to mute then you can block app audio and just get Music audio or Pandora if you are using pandora.

Can two DSL routers (not wireless) be in the same house at the same time?

Similar Messages

Maybe you are looking for