Can two time capsules be on the same network

I just bought a new TC and am retiring my old TC. How do I setup the old TC as network available hard drive storage?

If the "old" TC is still setup on the network, it is already configured as a network storage device.
Or, do you mean that the "old" TC has been disconnected from the network and you need to hook it up again?

Similar Messages

  • Can two subVI show up at the same time?

    Can two subVI show up at the same time?

    Hi,
    Save the vi as a template (*.vit), then you can open it (dynamically) as
    often as you want. If you make the vi "floating", you get the best results.
    Regards,
    Wiebe.
    "smal" wrote in message
    news:[email protected]..
    > Hi,
    > What if the subvi has to be called dynamically (hence using call by
    > refrence node).
    > In fact I want to run a subvi each time a button is clicked
    > independent of the others(it gets just some parameters from the caller
    > vi & must continue running so the user can interact with it via its
    > front panel )
    >
    > Thanks for your attention in advance.

  • Can two Times Capsules work as Raid1?

    Can two Time Capsules work as Raid 1 (copy the same content to each Time Capsule) so that if one TC fails the other works.

    Bob,
    Thank you very much for the information.
    My plan is to buy two TCs and install iTunes on them to save space on my laptop's SSD.
    As I read Isaw that putting photos on TC is not reccomended due to the possibility of the failure of the HD.
    I think two TCs will help on that.
    I hope Apple will make a more secure TC (with two HDs in raid 1 mode).
    Best
    Sinan

  • Can two apple TV's in the same house share one itunes library?

    Can two apple TV's in the same house share one itunes library and play different movies at the same time?

    I have two ATV G2 and one ATV G1 at home with the same iTunes library. I have played two different movies in the ATVs. One interesting thing you get is that you can start one movie and pause it and then you can continue playing it in the other ATV. The iTunes controls where you pause or stop the movie.
    Agree that bandwidth is the limit here and probably the server throughput. But, so far I haven't experienced any problem.

  • Can two java program write to the same port by fetching data from different

    can two java program write to the same port by fetching data from different ports, if yes is thing possible for a 3rd program to get all data (is there any data loss or collision)
    how is this possible

    can two java program write to the same port by fetching data from different portsTwo java clients can connect to the same server port and they can both write to it. However the server will see the connections as two separate accepted sockets.

  • How can I uniquely identify computers on the same network/account specifically for airdrop use?  When I change name on one computer under contacts if changes on all computers.

    How can I uniquely identify computers on the same network/account specifically for airdrop use?  When I change name on one computer under contacts it changes on all computers.  I would like to change icon and name for each computer.

    you would need to setup a VPN and tunnel into your office.
    FYI..the default ports are 3283 and 5900.

  • We have 2 Galaxy 4 phones that are exactly alike. They are 2-3 minutes different in the time. We share the same network.

    We have 2 Galaxy 4 phones that are exactly alike. They are 2-3 minutes different in the time. We share the same network.

        That's pretty strange, runjudy. Are you looking at the time on the weather application or on the top right corner of your phone? If you reboot the phones, do the times sync up? Make sure the devices are both set to automatic in the Date and Time Settings: http://www.verizonwireless.com/support/devices/knowledge_base.html/77713.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Can you have two airport extreme connected in the same network?

    You can have two airport extreme connected at the same time in a network?
    like if you have a modem, you can connect two airport extreme in that modem?

    You can have two airport extreme connected at the same time in a network?
    Yes
    like if you have a modem, you can connect two airport extreme in that modem?
    Airport Extreme
    You should plan to connect one AirPort Extreme to the modem and the second AirPort Extreme to the first. The first Extreme will connect to the modem using an Ethernet cable. The second Extreme can connect to the first also using an Ethernet cable, or it can connect using wireless only.

  • Can't connect to computers on the same network and same office

    Hi everyone, I have this problem from some time now, I have on the same network some computers with ethernet, and some with Wi-Fi.
    All are connected to the C-Net Wireless-G Router.
    My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area, but I have an iMac 2.0 next to my iBook and I can't see it.
    How is that possible? Am I making something wrong with the subnet mask or IP address?
    All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
    The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
    Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
    If anyone could give me a hand here, I will apprettiate the advice.
    Thaks to everyone, Pablo from Argentina.

    rccharles wrote:
    All are connected to the C-Net Wireless-G Router.
    My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area,
    but I have an iMac 2.0 next to my iBook and I can't see it.
    How is the iMac 2.0 connected? cable or wireless?
    iMac is on Wi-Fi.
    How is that possible? Am I making something wrong with the subnet mask or IP address?
    You are on a different subnet. In x.x.x.0 the x's are different.
    All the computers are in the same subnet, cable ones and wi fi ones.
    All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
    The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
    Look at what ip addresses you have on each machine.
    I have different IPs on each machine, do you need the numbers?
    Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
    Macintosh-HD -> Applications -> Utilities -> Network Utility.app
    Use the ping command to see what is going on. Ping 192.168.1.254, source & destination machine. 127.0.0.1 is an alias of the machine you are on.
    !http://farm3.static.flickr.com/2575/4090068351_6fb8dc3d55.jpg"!
    check out port scan. This will tell you if sharing is on.
    !http://farm3.static.flickr.com/2506/4090068193_7566e620cf.jpg!
    I will try this
    Message was edited by: rccharles

  • Time Capsule + Belkin Wireless router, same network to separate slower devi

    Alright ladies and gents here's what I got.
    I have a Time Capsule and a Belkin wireless n+ router. I want to use my Time Capsule to connect all my wireless n devices using the 5,0GHz band and use the Belkin router using the 2.4GHz band to connect the g devices thus simulating a simultaneous dual-band Wi-Fi, of course all in the same network. I want to be able to see the TC disk from the "slower" devices.
    Is this possible?
    Any ideas on how to configure?

    +I want to be able to see the TC disk from the "slower" devices.+
    +Is this possible?+ Yes
    +Any ideas on how to configure?+
    We're going to need know how you have things configured now. Is the Belkin router the "main" router at this time?
    +I want to use my Time Capsule to connect all my wireless n devices using the 5,0GHz band and use the Belkin router using the 2.4GHz band to connect the g devices thus simulating a simultaneous dual-band Wi-Fi, of course all in the same network+
    Using the same wireless network name for both the 2.4 GHz and 5 GHz bands, as is done on the Apple "dual band" routers, there will be no guarantee that faster computers will connect to the 5 GHz network if they happen to see a stronger signal from the 2.4 GHz network...which is likely as 5 GHz signals are absorbed much more quickly than 2.4 GHz signals.
    Your computer will always connect to the stronger signal...not necessarily the faster signal first, unless you tell it otherwise.
    Message was edited by: Bob Timmons

  • Can two Macbook Pro's share the same Itunes folder(all media in Ituens) on an external drive (like Time Capsule)? How and what issues may arise?

    Hey, I have two macbook pros (250 gb). They are both running out of space. My first thought was to share an iphoto library off of Dropbox or our Time Capsule. But, I heard that if one file gets corrupted (interenet cuts out, for example) then the whole library gets corrupted. Well, we're full again and now I am wondering if I could move our Itunes folders to our Time Capsule, sync/sort them both so there won't be any duplicates and then use this as a shared itunes library. So first, is this possible? Both computers share the same itunes account.
    Second, if I do, and I purchase a song, show, whatever, does it automatically be added to the itunes library on our Time Capsule and then it is available for both computers to access? Or do  I need to "import" it on both?
    Third, does the "file corruption" issue listed above pertain to itunes?
    I saw a discussion about this but it was form 2008. I am sure things have changed a bit since then.
    Thanks for the help!
    jbh

    No.

  • Can two different local ips use the same port at the same time?

    Can two PS3s use the same ports at the same time. So let's say you have two PS3s and they need to open the exact same set of ports at the same time to be able to play the same game online. Is that possible on a regular consumer router such as the wrt310n? If so, then how would someone go about that. I am just asking out of curiosity.
    I don't work for Cisco. I'm just here to help.

    Use port range Triggering instead of Port forwarding. When you use port triggering then those ports will be opened for the entire local network.

  • Can two copies of LR access the same library at the same time?

    I am in a small studio with multiple Mac workstations and multiple copies of LR. We often have shoots where one person will work on photos from the reception of a wedding while another person works on the ceremony photos at the same time. So far we just export the XMP metadata to the DNG files when we are done working on one machine and import the XMP metadata of those files on the other computers to have the changes up to date.
    Currently we are all using our own libraries. The only problem is that virtual copies do not transfer in this process.
    Can we all use the same LR library at the same time to work on different parts of an event, and therefore all be able to see the virtual copies, collections, and other changes that we make to images including the images that we send to PSCS2 to further edit and then re-import?
    Does anyone know if this will work, or will it bring about the end of the world as we know it?

    Since the beta had it, under the name of "binders", it's something that's been thought out, put in, but pulled when the switch was made from collections to folders as the primary "keeper" of the images. So I feel there's good reason to expect it back at some point.
    <br />
    <br />One way or the other, it probably will not signal the end of the world!
    <br />
    <br />
    <span style="color: rgb(102, 0, 204);">John "McPhotoman"</span>
    <font br="" /></font> color="#800000" size="2"&gt;~~ John McWilliams
    <br />
    <br />
    <br />
    <br />MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8;
    <br />Canon DSLRs

  • Can two different account work on the same project?

    I work for a non-profit organization and we are think about switching platform for our website, we are looking in to Muse, our graphic designer already have a Adobe Muse account and we would like to get an other account for the organization, will it be possible for both our account to work on the same project? With an account we can only have two computer with Muse and there will be 3 working on the website.

    Hi Alexandre,
    At any given point not more than one person can work on a .muse file. Muse is not yet designed for a workflow like this. You can update the .muse file using three different accounts as long as the file is not opened at more than one end at the same time and the file needs to be shared manually in between the accounts once one person is done working on it.
    - Abhishek Maurya

  • Time Capsule backing up the same amount of data every hour?

    Hey there, anyone have this problem. My Time Capsule backs up 5.44 GB every hour. I can't find what it's backing up, but it's apparently backing up the same data every hour as if it's new or changed within the past hour. I'm not changing any data and it sitll backs up 5.44 GB of data every hour. Any ideas? Thanks!

    I just exlucded the entire Entourgage file from Microsoft Word 2008. Apparently that wasn't the problem though.
    Try excluding Main Identity
    Macintosh HD > Documents > Microsoft User Data > Office 2008 or 2011 Identities > Main Identity
    The entire Database file is in there. Any change at all to any email and the whole database will back up on the next pass.

Maybe you are looking for

  • Edit Button Not Working in PDF Portfolio

    The Edit function is greyed out whenever I try to create a PDF portfolio directly from an Outlook mail folder. We are using Adobe Pro X.  Any suggestions on why this is and how to fix?  I've been able to create other portfolios and use the Edit butto

  • Unable to capture video from canon xha1s to final cut pro 6.0. so confused

    hi, i purchased a canon xha1s and am simply trying to capture the video onto my macbook pro laptop. i keep getting the error saying my settings are incorrect and am confused as what to put and where. i went to the video/audio settings and put what i

  • Issue upgrading to snow leopard. CD ejected halfway

    I have an old mac laptop that is os x 10.5.8, Inter Core 2 Duo. I want to upgrade to snow leopard so I got the CD. It downloads to about 48% ejects itself and reboots, and does not finish the download, what do I do?

  • Infotype's Extension - 0021

    Dear's Friends: Here I am, in my first HR Project like ABAP HR Development. Is not easy, but i need to 'go up' with this problem. Well, i tell it. I need to include 3 more fields in the infotype 0021, this 'Z' fields the functional gives to me, with

  • END_SQL parameter use in OLAP Universe?

    Folks, We normally use END_SQL in our Universe parameters /Document Name :@variable('DOCNAME'),User ID :@variable('BOUSER'),UNIVERSE :@variable('UNVNAME')/ for all our relational universes to track - which users are running long queries. We are curre