Can u help me my dvd drive not working

Product Windows7
HP 2000 NOT BOOK PC
PRODUCT NO A7A84UA#ABA
SYSTEM BIOS -F.43
can u send me i can insttal my cd & dvd hard drive

Please follow the below link and follow suggested steps to resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01895589&tmp_task=solveCategory&cc=us&dlc=en&la...
Please update the status of the solution for further assistance.
Let us know for more!
"I work for HP."
Click the Kudos star to say thanks
Please mark Accept As Solution if it solves your problem
Regards
Sreenag

Similar Messages

Dvd drive not worked properly

i have hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action till now .why u people do like this .i want explation and just change my dvd drive that's all.

tcrite,
Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

External DVD drive not working with Lombard G3 333

I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
Also, would it be difficult to add a DVD logic board to my Lombard?
Joey

xamdu,
I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
http://patchburn.de/download.html
If the above is unsuccessful, take a look at this workaround:
http://www.macosxhints.com/article.php?story=20040330171655882
You can swap logic boards but it does require a lot of disassembly.
Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

CD/DVD drive not working --- HELP

i'm wondering if this is something i can fix myself or that i'll have to bring in....
for no apparent reason, ie no trauma or anything, my CD drive is not working. when i put in a CD (haven't used a DVD in it yet) the computer doesn't read it. it makes a odd noise and then nothing.....i push eject and the computer kinda freezes and i can only get the CD out if i Force Quit iTunes and restart my iBook. any thoughts, greatly appreciated.

Hi, and welcome to Apple Discussions.
Are your System Preferences set to do what you are expecting when you put a CD into the drive tray?
From Mac Help:
You can determine how you want your computer to respond when you insert a music or picture CD in the optical drive. You can:
Open iTunes or iPhoto to play or view your CD
Open another application of your choice
Run a script to perform a sequence of actions
Ignore the disc if you don't want to do anything right away
Open System Preferences and click CDs & DVDs.
Choose an action from the two pop-up menus for music CDs and picture CDs.
Close the window to save your settings.
To play a music CD automatically when you insert it, you also need to set iTunes to begin playing when you insert a CD. In the General pane of iTunes Preferences, choose Begin Playing from the On CD Insert pop-up menu.
If your System Preferences are set correctly, you can try to do a little hard drive maintenance to see if that will help. This may or may not help (depending upon what the problem is), but it won't hurt to try. Try booting into Safe Mode. This will take awhile longer than a normal startup because it does a file check and repair of the hard disk.
If this works you will see your normal desktop. Once completely started up, try to restart normally, and go to Applications/Utilities/Disk Utility and repair permissions on the hard drive.
See if a little hard drive maintenance helps things out.
Also, how big is your hard drive and how much space remains available on it? Strange things start to happen when you have less than 5 GB of available hard drive space.

CD/Dvd drive not working - help please

Hello,
Whenever I put a disc into my cd/dvd drive it ejects immediately and when I look at the system profiler it does not show the drive as even existing. The problem originated when I did a software update 2 months ago and the computer crashed everytime I put a disc in.
Any advice would be greatly appreciated,
Denver

Welcome to the Apple discussions.
Often, when a software update doesn't completely install, odd things can happen. If the software update was for 10.5.5, go to http://www.apple.com/downloads/macosx/apple/macosx_updates/ and download the combo 10.5.5 release. Before installing it, bring up disk utility (in applications/utilities) and repair permissions, install it, then repair permissions again.

DVD drive not working properly.....

here's the info on whats going on:
when i try to put in a CD/DVD it spits the disk out right away. after trying to put it in about five times or so, the drive takes it, makes its fancy noises to make me think that its reading the disk, but the computer doesnt recognize that it has one in the drive. sometimes it spits the disk out, but other times it will just keep it.
ive been reading posts from other users with similar issues and done everything that everyone has tried i.e. going to disk utilities and "verifying the disk" (it says everything is working normally), tried to "repair" the drive, and when i go the the info section about my disk drive it says that its read/writable, but not ejectable.
here is the info that it gives me, maybe this could be of some help to try and narrow down the possible problems:
Name : FUJITSU MHY2160BH Media
Type : Disk
Partition Map Scheme : GUID Partition Table
Disk Identifier : disk0
Media Name : FUJITSU MHY2160BH Media
Media Type : Generic
Connection Bus : Serial ATA 2
Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 149.1 GB (160,041,885,696 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 0
the last thing that i havent done is do a full restart of the computer. that is my last resort. anyone have any ideas on what to do?
thank you for your time.

I have a question similar to this.....
Just recently (no updates/changes, etc) my CD drive stopped working. It won't let me enter a CD at all. It is as if there is something in there blocking it. I tried restarting the computer, but that didn't help. It acts like I have to force it in there, but I really don't want to do that. As far as I know there's nothing in there, as I rarely use the drive. Please advise if there is any sort of resets I can do for the drive (I'm still trying to get the hang of my MAC).
Thank you for any assistance!!!!

External DVD drive not working

Need some help with this one:
My sister-in-law has an iMac G4 1.25Ghz 17” LCD USB 2.0 with 10.4.11.
The internal DVD-ROM CD-RW died awhile back so she purchased a Sony external DVD-ROM CD-RW USB 2.0 to take its place.
Everything was working fine.
Recently, she had some bad sectors on her HD (5 yrs old anyhow), so I purchased her a new HD, installed it and while I had the case open, I removed the broken internal DVD-ROM CD-RW. Installed a fresh 10.4.11
System profiler can see the USB Sony DVD-ROM CD-RW, but when a disk is installed, or when I open Apple DVD player, it says a disk drive cannot be found.
The DVD can be seen on the desktop.
System prefs is configured to open Apple DVD player when a DVD is inserted.
I hooked the new Sony drive to my setup (iMac G5 2.0) and the drive works fine when I put in a DVD.
Would removing the old broken DVD-ROM drive from the G4 cause the new external USB Sony not to work??
Any suggestion? I checked Sony’s site and there is no d/l’s for the drive.
Thanks,
--Bob Aldridge
Huntsville, AL

Hey Bob,
My understanding of this is that when you install the OS there is like a "shake hands" with the DVD-ROM chip on the internal ATA bus by the installer. The installer then installs/enables the necessary components to play DVDs.
Would removing the old broken DVD-ROM drive from the G4 cause the new external USB Sony not to work??
If you remove that drive that's probably why you get the:
"An installed DVD player cannot be found" error.
I did not re-apply any thermal compound on the heat pipes. Is the compound something I can get a Radio Shack?
Here's the exact procedure from the 1.25 Service Manual:
"This procedure requires the following tools:
• Plastic stylus or plastic spatula to remove the old thermal paste
• Plastic stylus or plastic spatula to spread the thermal paste
• Thermal paste (922-4757)
Part Location
1. Thoroughly clean the original thermal film from the mating surfaces (circled below) of
the bottom housing and thermal pipe. Use a plastic stylus to scrape the surfaces
clean. Note: Do not use an abrasive material or liquid cleaner.
2. Squeeze a ball of thermal paste onto the mating surfaces of the thermal pipe.
3. Replace the bottom housing.
Warning: The bottom housing has four torx screws that must be tightened to at least
17 in.-lbs. Use a torque driver (service tool 076-0899) to ensure that the thermal pipe
is firmly mated with the top base. If you do not have a torque driver, you must make
sure the screws are tightened by hand FIRMLY, BUT NOT FORCIBLY.
Failure to apply the thermal paste as described in this procedure, and failure to
tighten the torx screws as directed, could cause the computer to overheat and
damage internal components."
I personally haven't had a 1.25 apart. The 700s and 800s I've had apart have a silicone pad like material or thick rubber compond on the heat pipes. The manuals for those machines refer to "thermal pads".
I think you could use a thermal pad material like from Micro Center, Comp USA or Radio Shack.
This is the Radio Shack stuff:
http://www.radioshack.com/product/index.jsp?productId=2295074&cp=&sr=1&kw=therma lpad&origkw=thermalpad&parentPage=search
If the thermal stuff was not too badly damaged you'll probably be OK but I'd probably run Temperature Monitor for a while just to make sure.
Richard

Optical DVD drive not working properly: HP notebook g61

Game disks and dvd movie disks not working consistently. Sometimes detected as empty dvd disk and asks if I want to burn to the disk. Other times does not read that there is a disk in the drive. Computer is about one month old. On one of my game disks, I have to reinsert 4 or 5 times before it will read properly. Any suggestions?

Sounds like you use the disk drive a lot. Before we panic and recommend a new drive, try a DVD lens cleaner you can pick up at any place that sells a lot of DVDs, like even WalMart. Run the cleaner disk and see if that helps.

HP Pavilion 500-018 Desktop PC DVD Drive not working

I have a HP Pavilion 500-018 Desktop PC with windows 8.1. For some reason, the CD-ROM drive has stopped working. When I put a disk in to install new software, it does not recognize that there is a disk in the drive. I've tried updating the driver, etc. Even in the file explorer, the drive does not show up. About the only thing I can do it eject the disk.
Any help would be most appreciated.

Hello officeh2h -
It sounds like windows is not recognizing the CD/DVD drive. Click here to view a document that addresses this problem.
I hope this takes care of it for you.
Cheers,
dhtp
Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
DH
I work on behalf of HP.
Please click "KUDOS Thumbs Up" if I have helped you, and click "Accept as Solution" if your problem is solved. Thanks for the feedback!

A 205 CD/DVD drive not working, and slow start-up

My A 205 Satellite laptop no longer recognises its CD/DVD drive. Drive does not work, though it can be heard spinning when a disc is in it, and it does not show in My Computer. I have been into the registry and removed the upper and lower filters, but the drive is still not reconised. Can anyone help? The same laptop also takes much longer to start-up than it used to - the start-up progress bar seems to stick at about 75% for a couple of minutes before proceeding and letting themachine start. Machine is two years old and is running Windows Vista. Suggestions appreciated.

> So far, all I can think is that the drive has had it and needs replacing, but it's not even a year old!
There is no time limit where you can say: ok now it is acceptable if the drive is defective.
If you are sure that ODD is defective contact nearest Toshiba service provider as soon as possible and ask for help.
Addresses and phone numbers you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
Good luck

Dvd drive not working after upgrade to osx10.9

Since my Macbook upgraded to 10.9 the DVD drive no longer works.
Putting in either a pre-recorded disc or a blank to burn results in the disc being ejected after spinning for a few seconds.
The SD card reader also stopped working but I was able to correct that problem.

Same problem here on a mid-2010 21.5" iMac. Will read CDs and 1 out of 100 DVDs (1 kids' DVD, weird) but generally nothing in DVD format.
I tried all the solves listed (change prefs, reset EMC and both PRAMs, boot from internet disks, even an Endust cleaning CD). Nada. I then set up a Joint Venture call and they diagnosed the drive as faulty after repeating all of the above. They say it's very possible that dying Superdrives can read CDs and even burn disks but not read DVDs. They said it'd be about $150 to replace the drive at a Genius Bar.
Here's where I try to be helpful.
If you're found this thread and you're not under warranty, don't waste ANY time testing it or trying to fix. Certainly don't roll back to previous software versions -- wasting hours of time and eliminating software features you may like or introducing incompatibilities. Just hop on over to Amazon and buy a $30 (not kidding) Amazon Basics external DVD drive. I ordered one w/ my cleaning disk knowing I'd prob need it and prob wouldn't want to pay Apple to fix my 3-year old machine. Works like an absolute charm for me. Faster ripping CDs than the Superdrive, plays DVDs through DVD Player, VLC, or XBMC instantly.
So my advice (ignore it if you like, it's worth what you paid for it) is to ignore any conspiracy theories about whether Apple planned this. IMHO, it doesn't matter for $30. Your time is worth more than $30. Just buy an external and get on with your life. You can even use it with your drive-less Air when you get one, if you don't have one already. How often can you solve a complex computer problem instantly, and be better off in the end, for $30? Just do it. End of advice.
HTH.

[SOLVED] dvd drive not working, log file filled with error.

hi,
i dont know if this is something to do with the latest kernel update or something else that may have occured.
but my dvd writer has stopped working. no light on the front, pressing the button does not open the tray.
it wtill works fine when i boot into windows (dual boot with XP) so it's not a hardware issue.
also my everything.log file is filling up with the following every two seconds!
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
can someone please help me before i run out of disk space for my logs!
thanks,
ad.
Last edited by adax (2008-03-01 23:25:37)

Hello,
I strongly suspect that you need to change 'ide' to 'pata' in your /etc/mkinitcpio.conf
#HOOKS="base udev autodetect ide scsi sata usb keymap filesystems"
HOOKS="base udev autodetect pata scsi sata usb keymap filesystems"
Then recreate with:
mkinitcpio -g /boot/kernel26.img
Last edited by colnago (2008-03-01 21:21:37)

Dvd drive not working on iMac

Hi! DVD drive on my iMac is not reading any DVD or CD. It try to read then it ejects it. Can anyone help me?

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
==============
Apple's Disc Burning Quick Assist
Make sure the DVDs are not dirty, smudged and/or scratched.
http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
*** Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs. ***

Satellite Pro A210 DVD Drive not working - error code 39

Hi All
My Satellite Pro A210 dvd drive is not loading.
When I looked into it it showed an error code 39.
I tried uninstalling it and reinstalling it but it's still not working.
Any ideas?

Hi
From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
You can try this workaround:
Go to device manager and delete the CD/DVD drive from the device list.
Then go to registry (regedit) and remove the upper and lower filters from the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the unit and test it again
I think this should help!

DVD Drives not working after Snow Leopard install

Hello all. I'm having problems after installing Snow Leopard. Om my MacBook Pro, my DVD drive doesn't even read discs anymore. It keeps it spinning for a while and then ejects it.
Coincidentally, the drive on my iMac 3+ GHZ is not accepting my discs into the DVD drive. It's not sucking in the discs anymore.
Both of these things started happening right after the Snow Leopard installation.
Can anyone help?

Have been running without trouble and had total ability to burn disc images to DVD until SL installation. after installation, every burn attempt fails to complete, give me an unrecoverabl, unable to restart error. I does burn data to the disc, but fails at some point near the end of the burn wich renders the disc a "coaster". I put my spare HDD back in wich was running 10.5, the problem exists with that drive also. My next step was to load a fresh drive with 10.5, even then the problem exists. I find it hard to believe that the drive failed exactly when SL was installed, more likely that the installation changed a hardware setting, or installed a firmware update which cause the problem. As I am a repair tech, I have done a ton of reaserch on the subject, and I find that litterally 10's of thousands of people have had the same issue after the SL upgrade. Come on Apple, I always heard you were better than Microsoft, but as everyone can see there is a problem. Get working on the fix and patch it just like Microsoft.

Can u help me my dvd drive not working

Similar Messages

Maybe you are looking for