Can UC560 support the most current SCCP phone loads?
I have a UC560 that I recently upgraded to Software Pack 8.6(2).
The default phone loads from this software pack, are different than what's currently available to download from CCO, for certain phone models.
For example, the Cisco SPA508G firmware load that comes with SW Pack 8.6(2) is 7.5.2c. However, the most current firmware load available from CCO is 7.5.5 (released 6/14/2013).
Can I upload the latest phone load zip file from CCO, to the UC560? Or is UC560 only supported with the firmware loads that come with the software pack?
Hello,
You can run the new phone loads with the current software pack. Generally, I would only advise doing that if you are running into a specific issue/new feature that requires an upgrade first.
Thanks,
-john
Similar Messages
-
What's the most current OX system can I run on the power Mac g5
What's the most current OX system can I run on the power Mac g5
Hello,
1058 Combo Update, 10.5.8...
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Anything higher requires an IntelMac, no G4s or G5s can run it. -
My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!
With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.
-
My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!
Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.
-
Since downloading the most current iTunes software I am no longer able to print an insert (label) for a jewel case. I click on print, choose jewel case and then it doesn't matter which option I choose for the insert it will only print the songs over each other in a 1 inch section so that it can not be used or read. If instead of clicking on the jewel case I click on list it works fine and prints an appropriate list. I have always updated the iTunes software the first time I am offered to do so and I have never had a problem printing the jewel case inserts. Since this issue is not about a piece of hardware iTunes help will not help me.
Did you ever get a response?
If you so how did you correct the problem?
I have the exact problem you had.
Please let me know.
Thank you
<Edited by Host> -
I can't scan to my computer with my HP Photosmart Plus B2010a, I get a "Failed to open a session on the device" message everytime. I'm using the most current driver for OS X Lion 10.7 off the HP website.
I get the same "Failed to open a session on the device" message with Apple Image Capture as I do with the HP Utility software.
-
I am trying the Tor web browser software pack and it comes with Firefox ESR 10.0.7.
Right now, I'm trying to install a Flash Player plugin because it doesn't have one in this Firefox ESR 10.0.7 already, or this browser just doesn't see the slightly older Flash Player 11.2.202.228 plugin that I already have already installed on this machine.
'''Is there a way to make this Firefox ESR 10.0.7 browser see the Flash Player plugin 11.2.202.228 that I already have installed on this machine without installing the newest, possibly problematic Flash Player plugin?'''
I already have the Flash Player 11.2.202.228 plugin installed on this machine, a PC with Windows 7 ULT, because the most current versions of the Flash Player plugin had some problems and they wouldn't allow Flash content to play at all, so I reverted back to a slightly older version of the Flash Player that was reliable, crash free, and most importantly, it works.
But when I try to play any Flash content in this Tor-Firefox ESR 10.0.7 browser it tells me I don't have a Flash Player on this machine, or installed as a browser plugin or add-on, and it wants me to install the most current Flash Player on this machine, which I DO NOT want to do for the reasons I stated above.
My other Firefox browser, along with Google's newest Chrome browser and a newer version of the Safari browser for Windows, plus an older Internet Explorer 8, all WORK JUST FINE with the Flash Player 11.2.202.228 that I have installed on this computer and Google Chrome and Safari didn't even require having newer Flash Player plugins installed at all... they just see the Flash Player 11.2.202.228 plugin that I already have on this machine and they play all Flash content perfectly.
So can I just make this Tor-Firefox ESR 10.0.7 browser see the existing Flash Player 11.2.202.228 plugin that I already have on this machine?... and if so, how do I do that?
Thanks for any help.
Also, I'm not able to find an actual community help forum for Tor, even via their "Torproject.org" website... is there one?
Thanks,
numetroYou should actually be using Flash 10.3 (11.2 is insecure).[[Flash 11.3 doesn't load video in Firefox#w_solution-2-downgrade-flash|Solution 2: Downgrade Flash]].
Also, is there a reason you are using Firefox ESR? It's mean for organizations, and doesn't include all the security and stability fixes that Firefox latest (15.0.1) has. -
What is the most current iweb version I can use to maximize my capabilities?
I have G5 a power pc running 10.4.8 because of final cut issues - what is the most current version of iweb I can use to maximize my capabilities? i have it right now and can only host one site in it, etc. (though I build multuiples)
brentThe latest version of iWeb you can run with 10.4.9 is iWeb 2. iWeb 3 requires Leopard, 10.5.8 or later.
OT -
Why do I get a message that says "your account cannot be authenticated. If you have recently changed your email password please enter the the most current password in settings to continue...? I can't get my email. Help!
Hi there ninjajune! We understand the importance of receiving e-mails! Which e-mail account are you having this trouble with? Have you tried to delete the e-mail account and add it back? What is the make and model of your device? Additionally, are you able to access the e-mail account from a PC? Looking forward to your reply so tha I can better assist!
LenaA_VZW
Follow us on Twitter @VZWSupport -
I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?
The Tango app might be of some help with that:
http://www.tuaw.com/2010/11/08/tango-links-your-ios-devices-for-remote-music-con trol/ -
i have a mac powerbook g4 power pc processor, OS 10.5.8. what is the most current version of firefox i can use? i currently have 2.0.0.9 and am unable to auto or manual update edit
It was in the release notes for version 4 IIRC
-
i can't update my iPad because it says that i have the most current software but its only 5.1.1. what can i do?
Get a newer device. The original iPad can't be updated past 5.1.1.
(120544) -
I am having problems with my Magic Trackpad. All I can do is move the cursor and single click. I using the most current version of Lion.
In System Preferences > Trackpad > your preferences should look like this screenshot. If they don't then some 3rd party driver is conflicting. The most common conflict is USBoverdrive.
-
How can I use documents created in Pages 08 with the most current version of pages?
I just upgraded to the most current version of Pages from Pages 08. However, none of my files created with Pages 08 will open. I am told that I first need to save them with Pages 09, but I don't have Pages 09. What can I do to convert these files into a format that works with the newest Pages?
I have the same problem. There are a couple of clumsy workarounds. One is to open your file with Pages 08 and export it as a Word document, then import it into Pages 5. The second one is to open the file in Pages 08, copy the contents to the clipboard and paste it into Pages 5.
-
I've had it for a year now.
I have the most current OS. I snyc it to my itunes 2-3 times a week. It is only about 25% full. It stalls (I don't know if I would call it freezing) between trying to switch from app to app. I either have to let it sit there for a few minutes, or turn it all the way off and turn it back on.
And yes, I know to press the home button twice to get the bottom part activated. That's not working. I'm not sure if this is a common thing, or what with iphone 4's.
Anyone got any ideas?Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!
Maybe you are looking for
-
Request for S300 owner (save me please ^^)
Hi everybody ! I am looking for someone who could make a backup of the BIOS (with Universal BIOS Backup Toolkit) to try a recovery BIOS procedure.(I've a S300/i3). Indeed, downloadable bios on the website are no t in the correct format for recovery p
-
Hi All, I have recently updtaed to 3.0.1, and my TV shows are now not playing correctly. When I play them, the top and bottome of the picture is cut-off. It may be that the sides are cut-off as well, I just cannot tell. I have tried to adjust my TV s
-
Wifi: no hardware installed, after latest yosemite security update
I just applied Security Update 2015-002 (at the behest of Software Update), along with the Command Line Tools (OS X 10.10) v6.2 update, and after the mini rebooted, it now says Wifi:No Hardware installed. And when I go to Network and Hardware in Syst
-
Opening similiar files in different windows problems
When i opening an existing file in a new window or "desktop" (the ones you see when you press F3), i want them to open in the desktop window that i have selected. For example if i open for file in desktop one in will open there. Now if i wanted to op
-
I'm experiencing a problem with my contacts and trying to sync Facebook information. Before I would update my Facebook contacts it but the link to the Facebook profile and updated the photo. Now it's not updating photos and putting a "0" under Facebo